Computational fluid dynamic investigations of partial blockage detection by core-temperature monitoring system of a sodium cooled fast reactor

Abstract Thermal hydraulic studies have been carried out to understand temperature dilution suffered by core-temperature monitoring system of a sodium cooled fast reactor. The three-dimensional computational model is validated against experimental results of a water model. Jet mixing phenomenon as predicted by different turbulence models is compared and RNG k–ɛ model is found to be better than other models. A comprehensive parametric study considering: (i) effects of construction/manufacturing tolerances on thermocouple positions with respect to subassembly positions, (ii) thermal/irradiation bowing of subassemblies, and (iii) changes in core power profile during reactor operation cycles has been carried out. The studies indicate the maximum possible dilution in fuel and blanket subassemblies to be 2.63 K and 46.84 K, respectively. Shifting of thermocouple positions radially outward by 20 mm with respect to subassembly centers leads to an overall improvement in accuracy of thermocouple readings. It is also seen that subassembly blockage that leads to 7% flow reduction in fuel subassembly and 12% flow reduction in blanket subassembly can be detected effectively by the core-temperature monitoring system.

[1]  Ulrich Bieder,et al.  Qualification of the CFD code Trio_U for full scale reactor applications , 2008 .

[2]  D. Tenchine,et al.  Some thermal hydraulic challenges in sodium cooled fast reactors , 2010 .

[3]  M. Anderson,et al.  Spectral emissivity measurements of candidate materials for very high temperature reactors , 2012 .

[4]  S. Orszag,et al.  Renormalization group analysis of turbulence. I. Basic theory , 1986 .

[5]  M. Azarian,et al.  Sodium thermal-hydraulics in the pool LMFBR primary vessel , 1990 .

[6]  D. Wilcox.  Reassessment of the scale-determining equation for advanced turbulence models , 1988 .

[7]  B. Launder,et al.  THE NUMERICAL COMPUTATION OF TURBULENT FLOW , 1974 .

[8]  Large-eddy simulation of thermal striping in unsteady non-isothermal triple jet , 2011 .

[9]  P. Chellapandi,et al.  The design of the prototype Fast Breeder Reactor , 2006 .

[10]  Hydraulic similarity in the temperature fluctuation phenomena of non-isothermal coaxial jets , 1990 .

[11]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[12]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[13]  G. Azarian,et al.  Assessment of Thermal-Hydraulic Characteristics of the Primary Circuit , 1990 .

[14]  H. Yamamoto,et al.  Measurement of subassembly outlet coolant temperature in the JOYO experimental fast reactor , 1980 .

[15]  Numerical investigation on temperature fluctuation of the parallel triple-jet , 2012 .

[16]  William F. Hughes,et al.  Basic equations of engineering science , 1964 .

[17]  C. P. Greef,et al.  Temperature fluctuations: An assessment of their use in the detection of fast reactor coolant blockages , 1979 .