Analysis of the flow distribution for thin stamped bipolar plates with tapered channel shape

Abstract Thin stamped bipolar plate (BPP) is promising for proton exchange membrane fuel cell (PEMFC). However, design laws in conventional method based on graphite BPP are not suitable for the design of stamped BPP since the tapered channel shape influences the flow distribution. By considering the channel cross-section on the stamped BPP, a formula for the pipe resistance is proposed to describe the flow resistance characteristics by introducing a shape factor. The shape factor is calculated by the computational fluid dynamics (CFD) simulation. Then, a theoretical flow network model based on mass and momentum conservation is developed to predict the flow distribution in Z-type flow field configuration. The accuracy of the model has been verified by comparing with CFD results. It is found that the aspect ratio and the base angle have significant influences on the resistance characteristic and flow distribution. And the results indicate that the homogeneity can be improved by increasing the proportion of flow resistance in the side channel. The flow network model provides an easy-to-use method to calculate the flow distribution and the results can be used as guidance for the design and optimization of the flow field for stamped BPP.

[1]  Anthony D. Santamaria,et al.  Effect of channel length on interdigitated flow-field PEMFC performance: A computational and experimental study , 2013 .

[2]  Peng Hu,et al.  Optimum design of the slotted-interdigitated channels flow field for proton exchange membrane fuel cells with consideration of the gas diffusion layer intrusion , 2011 .

[3]  Jun Ni,et al.  Design, Optimization, and Fabrication of Slotted-Interdigitated Thin Metallic Bipolar Plates for PEM Fuel Cells , 2011 .

[4]  Sreenivas Jayanti,et al.  Flow distribution and pressure drop in parallel-channel configurations of planar fuel cells , 2005 .

[5]  Loreto Daza,et al.  Optimisation of flow-field in polymer electrolyte membrane fuel cells using computational fluid dynamics techniques , 2000 .

[6]  Tao Chen,et al.  Investigation of bifurcation structure flow field for bipolar plates in PEMFC , 2013 .

[7]  Sreenivas Jayanti,et al.  A hydrodynamic network model for interdigitated flow fields , 2009 .

[8]  Sreenivas Jayanti,et al.  Pressure drop and flow distribution in multiple parallel-channel configurations used in proton-exchange membrane fuel cell stacks , 2006 .

[9]  Ermete Antolini,et al.  Influence of operational parameters on the performance of PEMFCs with serpentine flow field channels having different (rectangular and trapezoidal) cross-section shape , 2014 .

[10]  M. Pan,et al.  Moisture dehumidification and its application to a 3 kW proton exchange membrane fuel cell stack , 2015 .

[11]  Michael Fowler,et al.  Assisted water management in a PEMFC with a modified flow field and its effect on performance , 2010 .

[12]  Junye Wang,et al.  Pressure drop and flow distribution in parallel-channel configurations of fuel cells: U-type arrangement , 2008 .

[13]  D. Guinea,et al.  Electric modelling and image analysis of channel flow in bipolar plates , 2007 .

[14]  Peng Hu,et al.  Optimization design of slotted-interdigitated channel for stamped thin metal bipolar plate in proton exchange membrane fuel cell , 2009 .

[15]  Jason Marcinkoski,et al.  Manufacturing process assumptions used in fuel cell system cost analyses , 2011 .

[16]  S. Maharudrayya,et al.  Pressure losses in laminar flow through serpentine channels in fuel cell stacks , 2004 .

[17]  Hua Meng,et al.  Numerical modeling and simulation of PEM fuel cells: Progress and perspective , 2013 .

[18]  Junye Wang,et al.  Theory of flow distribution in manifolds , 2011 .

[19]  Allen M. Hermann,et al.  Bipolar plates for PEM fuel cells: A review , 2005 .

[20]  Ramana G. Reddy,et al.  Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells , 2003 .

[21]  Bruno G. Pollet,et al.  Polymer Electrolyte Membrane Fuel Cell (PEMFC) Flow Field Plate: Design, Materials and Characterisation , 2010 .

[22]  Hyung Jin Sung,et al.  Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density , 2006 .

[23]  Jun Ni,et al.  Fabrication of Metallic Bipolar Plates for Proton Exchange Membrane Fuel Cell by Flexible Forming Process-Numerical Simulations and Experiments , 2010 .

[24]  John A. Turner,et al.  Reviewing Metallic PEMFC Bipolar Plates , 2010 .

[25]  Hyung-Man Kim,et al.  Numerical studies on the geometrical characterization of serpentine flow-field for efficient PEMFC , 2011 .

[26]  Xinmin Lai,et al.  Study on shape error effect of metallic bipolar plate on the GDL contact pressure distribution in proton exchange membrane fuel cell , 2013 .

[27]  Todd J. Toops,et al.  Manufacturing and performance assessment of stamped, laser welded, and nitrided FeCrV stainless steel bipolar plates for proton exchange membrane fuel cells , 2013 .

[28]  Xianguo Li,et al.  Review of bipolar plates in PEM fuel cells: Flow-field designs , 2005 .

[29]  Peng Hu,et al.  Analysis and optimization of flow distribution in parallel-channel configurations for proton exchange membrane fuel cells , 2009 .

[30]  Linfa Peng,et al.  Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells , 2014 .