Enhancing the Machinability of Cf/SiC Composite with the Assistance of Laser-induced Oxidation during Milling

[1]  Wenhu Wang,et al.  Feasibility and tool performance of ultrasonic vibration-assisted milling-grinding SiCf/SiC ceramic matrix composite , 2022, Journal of Materials Research and Technology.

[2]  Tao Yang,et al.  Feasibility of micro-hole machining in fiber laser trepan drilling of 2.5D Cf/SiC composite: Experimental investigation and optimization , 2021 .

[3]  Liang Li,et al.  Experimental Study on High-Speed Milling of SiCf/SiC Composites with PCD and CVD Diamond Tools , 2021, Materials.

[4]  Jinkai Xu,et al.  Research on laser-assisted orthogonal micromachining technology of Cf/SiC composite , 2021, The International Journal of Advanced Manufacturing Technology.

[5]  Ming Chen,et al.  Machining of SiC ceramic matrix composites: A review , 2020 .

[6]  Bo Xin,et al.  Mechanical model and removal mechanism of unidirectional carbon fibre-reinforced ceramic composites , 2020 .

[7]  Xiaodong Yang,et al.  Influence of thermal stress on material removal of Cf_SiC composite in EDM , 2020 .

[8]  Ming Chen,et al.  Influences of clearance angle and point angle on drilling performance of 2D Cf/SiC composites using polycrystalline diamond tools , 2020 .

[9]  Y. Gong,et al.  Investigating Minimum Quantity Lubrication in Unidirectional Cf/SiC composite grinding , 2020 .

[10]  Yahui Cui,et al.  Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser , 2020 .

[11]  G. Huang,et al.  Investigation of grinding mechanism of a 2D Cf/C–SiC composite by single-grain scratching , 2019, Ceramics International.

[12]  Ming Chen,et al.  Experimental study on milling performance of 2D C/SiC composites using polycrystalline diamond tools , 2019, Ceramics International.

[13]  Jun Ma,et al.  Fiber orientations effect on process performance for wire cut electrical discharge machining (WEDM) of 2D C/SiC composite , 2019, The International Journal of Advanced Manufacturing Technology.

[14]  D. Axinte,et al.  The new challenges of machining Ceramic Matrix Composites (CMCs): Review of surface integrity , 2019, International Journal of Machine Tools and Manufacture.

[15]  Hui Wang,et al.  Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests , 2019, Ceramics International.

[16]  Xinquan Zhang,et al.  Oxygen-shielded ultrasonic vibration cutting to suppress the chemical wear of diamond tools , 2019, CIRP Annals.

[17]  X. Mei,et al.  Influence of surface morphology on processing of C/SiC composites via femtosecond laser , 2017 .

[18]  Jianxin Deng,et al.  Assessment in drilling of C/C-SiC composites using brazed diamond drills , 2017 .

[19]  Y. Shin,et al.  Improved machinability of SiC/SiC ceramic matrix composite via laser-assisted micromachining , 2017 .

[20]  Y. Liu,et al.  Character and mechanism of surface micromachining for C/SiC composites by ultrashort plus laser , 2017 .

[21]  William E Lee,et al.  Oxidation behaviour of SiC/SiC ceramic matrix composites in air , 2016 .

[22]  Songmei Yuan,et al.  Development of a cutting force prediction model based on brittle fracture for C/SiC in rotary ultrasonic facing milling , 2016 .

[23]  B. Lin,et al.  Investigations on grinding process of woven ceramic matrix composite based on reinforced fiber orientations , 2015 .

[24]  Lai-fei Cheng,et al.  Machining parameter optimization of C/SiC composites using high power picosecond laser , 2015 .

[25]  Fritz Klocke,et al.  Abrasive machining of advanced aerospace alloys and composites , 2015 .

[26]  Kai Ding,et al.  Experimental studies on drilling tool load and machining quality of C/SiC composites in rotary ultrasonic machining , 2014 .

[27]  A. Erman Tekkaya,et al.  Hybrid processes in manufacturing , 2014 .

[28]  L. Zhao,et al.  Electrical discharge machining of ceramic matrix composites with ceramic fiber reinforcements , 2013 .

[29]  S. Musić,et al.  Precipitation of amorphous SiO2 particles and their properties , 2011 .

[30]  Taghi Tawakoli,et al.  Intermittent grinding of ceramic matrix composites (CMCs) utilizing a developed segmented wheel , 2011 .

[31]  Ekkard Brinksmeier,et al.  Surface integrity in material removal processes: Recent advances , 2011 .