Strain rate dependence of compressive behavior in an Al-Zn-Mg alloy processed by ECAP

[1]  R. Valiev,et al.  Strengthening mechanisms in an ultrafine-grained Al Zn Mg Cu alloy processed by high pressure torsion at different temperatures , 2019, Materials Science and Engineering: A.

[2]  Hong He,et al.  Grain structure and precipitate variations in 7003-T6 aluminum alloys associated with high strain rate deformation , 2019, Materials Science and Engineering: A.

[3]  T. Langdon,et al.  Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments , 2018, Journal of Alloys and Compounds.

[4]  T. Langdon,et al.  Effect of heat treatments on the microstructures and tensile properties of an ultrafine-grained Al-Zn-Mg alloy processed by ECAP , 2018, Journal of Alloys and Compounds.

[5]  Guoqun Zhao,et al.  Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion , 2018, Journal of Alloys and Compounds.

[6]  T. Langdon,et al.  Characterization of precipitates in an Al-Zn-Mg alloy processed by ECAP and subsequent annealing , 2018 .

[7]  Guoqun Zhao,et al.  Microstructure evolution during solution treatment of extruded Al-Zn-Mg profile containing a longitudinal weld seam , 2017 .

[8]  Guoqun Zhao,et al.  Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization , 2017 .

[9]  T. Langdon,et al.  Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate , 2017 .

[10]  T. Langdon,et al.  Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al-Zn-Mg alloy , 2017 .

[11]  Saeed Khani Moghanaki,et al.  Modeling of the mutual effect of dynamic precipitation and dislocation density in age hardenable aluminum alloys , 2016 .

[12]  M. Ebrahimi,et al.  Effect of ECAP temperature on microstructure and mechanical properties of Al–Zn–Mg–Cu alloy , 2016 .

[13]  M. Weyland,et al.  Precipitation of a new platelet phase during the quenching of an Al-Zn-Mg-Cu alloy , 2016, Scientific Reports.

[14]  T. Langdon,et al.  Effect of grain size on compressive behaviour of titanium at different strain rates , 2015 .

[15]  A. Odeshi,et al.  Plastic deformation in relation to microstructure and texture evolution in AA 2017-T451 and AA 2624-T351 aluminum alloys under dynamic impact loading , 2015 .

[16]  A. Lukyanov,et al.  Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys , 2015 .

[17]  Partha Ghosal,et al.  Plastic flow behavior of 7017 and 7055 aluminum alloys under different high strain rate test methods , 2014 .

[18]  Donald J. Siegel,et al.  Compositional evolution of Q-phase precipitates in an aluminum alloy , 2014 .

[19]  R. Valiev,et al.  Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al–Mg alloy , 2014 .

[20]  Woei-Shyan Lee,et al.  Relationship between mechanical properties and microstructural response of 6061-T6 aluminum alloy impacted at elevated temperatures , 2014 .

[21]  T. Langdon,et al.  Dynamic compressive behavior of ultrafine-grained pure Ti at elevated temperatures after processing by ECAP , 2014, Journal of Materials Science.

[22]  Lin Liu,et al.  Microstructural Evolutions of AA7055 Aluminum Alloy Under Dynamic and Quasi-static Compressions , 2014, Acta Metallurgica Sinica (English Letters).

[23]  T. Langdon.  Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement , 2013 .

[24]  J. Schoenung,et al.  Precipitation phenomena in an ultrafine-grained Al alloy , 2013 .

[25]  J. Blandin,et al.  Influence of Processing Severity During Equal-Channel Angular Pressing on the Microstructure of an Al-Zn-Mg-Cu Alloy , 2012, Metallurgical and Materials Transactions A.

[26]  R. Valiev,et al.  Grain boundaries in ultrafine grained materials processed by severe plastic deformation and related phenomena , 2012, 1203.6496.

[27]  C. Cepeda-Jiménez,et al.  Mechanical properties at room temperature of an Al–Zn–Mg–Cu alloy processed by equal channel angular pressing , 2011 .

[28]  D. N. Travessa,et al.  High Strength AA7050 Al alloy processed by ECAP: Microstructure and mechanical properties , 2011 .

[29]  G. Gottstein,et al.  Microstructure evolution and deformation behavior of ultrafine-grained Al-Zn-Mg alloys with fine η' precipitates , 2010 .

[30]  T. Langdon,et al.  Developing Processing Routes for the Equal-Channel Angular Pressing of Age-Hardenable Aluminum Alloys , 2010 .

[31]  Magnus Langseth,et al.  Stress–strain behaviour of aluminium alloys at a wide range of strain rates , 2009 .

[32]  S. Ringer,et al.  Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy , 2009 .

[33]  R. Kapoor,et al.  High strain rate behavior of ultrafine-grained Al–1.5 Mg , 2008 .

[34]  J. C. Werenskiold,et al.  Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy , 2008 .

[35]  T. Langdon,et al.  The effect of severe plastic deformation on precipitation in supersaturated Al-Zn-Mg alloys , 2007 .

[36]  A. Almajid,et al.  Enhancement of mechanical properties and grain size refinement of commercial purity aluminum 1050 processed by ECAP , 2007 .

[37]  Q. Wei.  Strain rate effects in the ultrafine grain and nanocrystalline regimes—influence on some constitutive responses , 2007 .

[38]  Yonghao Zhao,et al.  Simultaneously Increasing the Ductility and Strength of Nanostructured Alloys , 2006 .

[39]  R. Valiev,et al.  Principles of equal-channel angular pressing as a processing tool for grain refinement , 2006 .

[40]  Q. Jiang,et al.  Strain rate sensitivity of face-centered-cubic nanocrystalline materials based on dislocation deformation , 2006 .

[41]  Yancheng Zhang,et al.  Evolution of microstructure and strengthening of 7050 Al alloy by ECAP combined with heat-treatment , 2006 .

[42]  Evan Ma,et al.  Tensile properties of in situ consolidated nanocrystalline Cu , 2005 .

[43]  L. Zhen,et al.  Micro-damage behaviors of Al–6Mg alloy impacted by projectiles with velocities of 1–3.2 km/s , 2005 .

[44]  Evan Ma,et al.  Strain hardening, strain rate sensitivity, and ductility of nanostructured metals , 2004 .

[45]  R. C. Picu,et al.  Atomistic study of pipe diffusion in Al–Mg alloys , 2004 .

[46]  J. Embury,et al.  The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA7030 , 2003 .

[47]  C. Chen,et al.  Structure and properties of ultrafine-grained Al-Zn-Mg-Cu and Al-Cu-Mg-Mn alloys fabricated by ECA pressing combined with thermal treatment , 2002 .

[48]  R. LeSar,et al.  Dislocation motion in the presence of diffusing solutes: a computer simulation study , 2000 .

[49]  R. Valiev,et al.  Bulk nanostructured materials from severe plastic deformation , 2000 .

[50]  A. Deschamps,et al.  Low-temperature dynamic precipitation in a supersaturated Al± Zn± Mg alloy and related strain hardening , 1999 .

[51]  A. Zeghloul,et al.  The effect of precipitation on the Portevin-Le Chatelier effect in an Al-Zn-Mg-Cu alloy , 1999 .

[52]  Terence G. Langdon,et al.  The shearing characteristics associated with equal-channel angular pressing , 1998 .

[53]  T. Nieh,et al.  High strain rate superplasticity in a continuously recrystallized Al-6%Mg-0.3%Sc alloy , 1998 .

[54]  T. Langdon,et al.  Principle of equal-channel angular pressing for the processing of ultra-fine grained materials , 1996 .

[55]  W. Hosford,et al.  Metal Forming: Mechanics and Metallurgy , 1993 .

[56]  H. Gleiter.  Diffusion in Nanostructured Metals , 1992 .

[57]  T. Sheppard,et al.  Formation of die lines during extrusion of AA6063 , 1990 .

[58]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .

[59]  P. McCormick,et al.  Effect of precipitation hardening on strain rate sensitivity and yield behaviour in an Al-Mg-Si alloy , 1979 .

[60]  U. F. Kocks.  Laws for Work-Hardening and Low-Temperature Creep , 1976 .

[61]  A. van den Beukel,et al.  Theory of the effect of dynamic strain aging on mechanical properties , 1975 .