Environmental impacts and benefits of organic Rankine cycle power generation technology and wood pellet fuel exemplified by electric arc furnace steel industry

Iron- and steel-mill manufacturing are the material- and energy-intensive industries in the world, accounting for 22% of total industrial energy use in 2011; thereby leading to significant carbon dioxide (CO2) emissions. In this study, the environmental impacts and benefits for the applications of organic Rankine cycle (ORC) power generation and wood pellet fuel in the electric arc furnace (EAF) steel industry were evaluated using a cradle-to-gate life-cycle approach. The business-as-usual scenario of the EAF manufacturing was first established, and then compared with the scenarios of ORC facility and wood pellet fuel. The system boundary of heavy fuel oil production includes resource extraction, refining and processing, and transportation. The inventory data used in life cycle assessment were gathered from the information of real plant operation. The results indicated that both the ORC facility and replacement of heavy fuel oil by wood pellet fuel can mitigate the environmental impacts on ecosystems, human health and resource depletion. The environmental benefits of integrating the ORC power generation in an EAF steelmaking plant were less than those of applying wood pellet fuel for reheating furnace. However, the benefit-cost ratio of ORC process was greater than that of wood pellet fuel because the capital, and operation and maintenance costs of ORC process were lower than that of wood pellet fuel process.

[1]  P. Pawelzik,et al.  Evaluation of environmental impacts of cellulosic ethanol using life cycle assessment with technological advances over time , 2012 .

[2]  Shu-Yuan Pan,et al.  Strategies on implementation of waste-to-energy (WTE) supply chain for circular economy system: a review , 2015 .

[3]  Min-Hsiung Yang,et al.  Thermodynamic and economic performances optimization of an organic Rankine cycle system utilizing exhaust gas of a large marine diesel engine , 2015 .

[4]  Lisa Branchini,et al.  Application of environmental performance assessment of CHP systems with local and global approaches , 2014 .

[5]  Steven Lecompte,et al.  Part load based thermo-economic optimization of the Organic Rankine Cycle (ORC) applied to a combined heat and power (CHP) system , 2013 .

[6]  Terrence L. Chambers,et al.  Installation and Operation of Parabolic Trough Organic Rankine Cycle Solar Thermal Power Plant in South Louisiana , 2014 .

[7]  V. K. Verma,et al.  Life cycle analysis of small scale pellet boilers characterized by high efficiency and low emissions , 2015 .

[8]  Joaquín Navarro-Esbrí,et al.  Performance evaluation of an Organic Rankine Cycle (ORC) for power applications from low grade heat sources , 2015 .

[9]  Ping Li,et al.  Integrated and innovative steel slag utilization for iron reclamation, green material production and CO2 fixation via accelerated carbonation , 2016 .

[10]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[11]  Edward S. Richardson,et al.  Thermodynamic performance of new thermofluidic feed pumps for Organic Rankine Cycle applications , 2016 .

[12]  Geoffrey P. Hammond,et al.  Energy efficiency potentials: contrasting thermodynamic, technical and economic limits for organic Rankine cycles within UK industry , 2016 .

[13]  Yongping Yang,et al.  Organic Rankine cycle for power recovery of exhaust flue gas , 2015 .

[14]  Christos N. Markides,et al.  An assessment of solar-powered organic Rankine cycle systems for combined heating and power in UK domestic applications , 2015 .

[15]  Martin Junginger,et al.  The economic potential of wood pellet production from alternative, low-value wood sources in the southeast of the U.S. , 2014 .

[16]  Marcelle C. McManus,et al.  Comparative cradle-to-gate life cycle assessment of wood pellet production with torrefaction , 2015 .

[17]  Shu-Yuan Pan,et al.  Challenges and Perspectives on Carbon Fixation and Utilization Technologies: An Overview , 2016 .

[18]  Muhammad Imran,et al.  Thermo-economic optimization of Regenerative Organic Rankine Cycle for waste heat recovery applications , 2014 .

[19]  Stefan Zerbe,et al.  Influence of agricultural residues interpretation and allocation procedures on the environmental performance of bioelectricity production – A case study on woodchips from apple orchards , 2015 .

[20]  Shu-Yuan Pan,et al.  CO2 Capture by Accelerated Carbonation of Alkaline Wastes: A Review on Its Principles and Applications , 2012 .

[21]  Yi-Pin Lin,et al.  An Innovative Approach to Integrated Carbon Mineralization and Waste Utilization: A Review , 2015 .