Cutting performance and failure mechanisms of TiB2-based ceramic cutting tools in machining hardened Cr12MoV mold steel

[1]  Roshun Paurobally,et al.  A review of flank wear prediction methods for tool condition monitoring in a turning process , 2012, The International Journal of Advanced Manufacturing Technology.

[2]  Inderpreet Singh Ahuja,et al.  Modelling the effects of cutting parameters on residual stresses in hard turning of AISI H11 tool steel , 2013 .

[3]  Jun Zhao,et al.  Cutting forces, chip formation, and tool wear in high-speed face milling of AISI H13 steel with CBN tools , 2013 .

[4]  Paul Mativenga,et al.  A comparative study of multilayer and functionally graded coated tools in high-speed machining , 2012 .

[5]  Bin Zou,et al.  Microstructure and Mechanical Properties of Ti(C,N)-TiB2-WC Composite Ceramic Tool Materials , 2012 .

[6]  M. Adam Khan,et al.  A hybrid algorithm to optimize cutting parameter for machining GFRP composite using alumina cutting tools , 2012 .

[7]  J. V. Abellán-Nebot,et al.  An experimental study of process variables in turning operations of Ti–6Al–4V and Cr–Co spherical prostheses , 2012 .

[8]  Chuanzhen Huang,et al.  Microstructure and Mechanical Properties of TiB2-WC-TiC-Ni Composite Tool Materials , 2012 .

[9]  Chen Yang,et al.  Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V , 2012 .

[10]  M. Hameedullah,et al.  Determination of optimum parameters for multi-performance characteristics in turning by using grey relational analysis , 2012, The International Journal of Advanced Manufacturing Technology.

[11]  Bin Zou,et al.  Effects of sintering additives on microstructure and mechanical properties of TiB2–WC ceramic–metal composite tool materials , 2012 .

[12]  Nukman Yusoff,et al.  A new approach to investigate tool condition using dummy tool holder and sensor setup , 2012 .

[13]  Lin Wu,et al.  Influence of plasma-MIG welding parameters on aluminum weld porosity by orthogonal test , 2010 .

[14]  O. Pandey,et al.  Process parameter selection for strontium ferrite sintered magnets using Taguchi L9 orthogonal design , 2005 .