A Technique for Stiffness Improvement by Optimization of Fiber Steering in Composite Plates

A methodology for stiffness improvement by optimal orientation of fibers placed using fiber steering techniques of composite plates has been developed and is described here. A genetic algorithm is employed to determine the optimal orientation of the tow fibers and, in addition, once the plate has been divided up into cells in order to apply the technique, the orientation gradient between adjacent cells is capped. The finite element method (FEM) is used to determine the fitness of each design candidate. The approach developed also differs from existing ones by having a more sophisticated chromosome string. By relying on the algorithm for the calculation of the fiber orientation in a specific cell, a relatively short and rapid convergence string is assembled. The numerical results obtained show a significant improvement in stiffness when the fiber orientation angle is allowed to vary spatially throughout the ply.

[1]  D. Kelly,et al.  Improving the Efficiency of Fiber Steered Composite Joints using Load Path Trajectories , 2006 .

[2]  Don Kelly,et al.  Fibre steering for a composite C-beam , 2001 .

[3]  A. Crosky,et al.  Improvement of bearing strength of laminated composites , 2006 .

[4]  David E. Goldberg,et al.  Genetic Algorithms with Sharing for Multimodalfunction Optimization , 1987, ICGA.

[5]  A. Crosky,et al.  Optimisation of fibre steering in composite laminates using a genetic algorithm , 2006 .

[6]  Zafer Gürdal,et al.  Design Tailoring for Pressure Pillowing Using Tow-Placed Steered Fibers , 2008 .

[7]  Layne T. Watson,et al.  Design of variable-stiffness composite layers using cellular automata , 2006 .

[8]  Don Kelly,et al.  On the design, manufacture and testing of trajectorial fibre steering for carbon fibre composite laminates☆ , 2000 .

[9]  George E. P. Box,et al.  Evolutionary Operation: a Method for Increasing Industrial Productivity , 1957 .

[10]  Dawn C. Jegley,et al.  Tow-Steered Panels With Holes Subjected to Compression or Shear Loads , 2005 .

[11]  As Fraser,et al.  Simulation of Genetic Systems by Automatic Digital Computers VII. Effects of Reproductive Ra'l'e, and Intensity of Selection, on Genetic Structure , 1960 .

[12]  Zafer Gürdal,et al.  Design of variable–stiffness laminates using lamination parameters , 2006 .

[13]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[14]  B. Hyman,et al.  Exploratory tests on fiber-reinforced plates with circular holes under tension. , 1969 .

[15]  A. Crosky,et al.  Strength improvement by fibre steering around a pin loaded hole , 2002 .

[16]  Goldberg,et al.  Genetic algorithms , 1993, Robust Control Systems with Genetic Algorithms.

[17]  John H. Holland,et al.  Adaptation in Natural and Artificial Systems: An Introductory Analysis with Applications to Biology, Control, and Artificial Intelligence , 1992 .

[18]  M. W. Hyer,et al.  Innovative design of composite structures: Design, manufacturing, and testing of plates utilizing curvilinear fiber trajectories , 1994 .

[19]  Alex Fraser,et al.  Simulation of Genetic Systems by Automatic Digital Computers I. Introduction , 1957 .