Thermal dynamic behavior during selective laser melting of K418 superalloy: numerical simulation and experimental verification

During selective laser melting (SLM) of K418 powder, the influence of the process parameters, such as laser power P and scanning speed v, on the dynamic thermal behavior and morphology of the melted tracks was investigated numerically. A 3D finite difference method was established to predict the dynamic thermal behavior and flow mechanism of K418 powder irradiated by a Gaussian laser beam. A three-dimensional randomly packed powder bed composed of spherical particles was established by discrete element method. The powder particle information including particle size distribution and packing density were taken into account. The volume shrinkage and temperature-dependent thermophysical parameters such as thermal conductivity, specific heat, and other physical properties were also considered. The volume of fluid method was applied to reconstruct the free surface of the molten pool during SLM. The geometrical features, continuity boundaries, and irregularities of the molten pool were proved to be largely determined by the laser energy density. The numerical results are in good agreement with the experiments, which prove to be reasonable and effective. The results provide us some in-depth insight into the complex physical behavior during SLM and guide the optimization of process parameters.

[1]  S. Khairallah,et al.  Mesoscopic Simulation Model of Selective Laser Melting of Stainless Steel Powder , 2014 .

[2]  Guanqun Yu,et al.  Selective laser melting 3D printing of Ni-based superalloy: understanding thermodynamic mechanisms , 2016 .

[3]  Xueping Ding,et al.  Heat transfer and fluid flow of molten pool during selective laser melting of AlSi10Mg powder: Simulation and experiment , 2017 .

[4]  C. Körner,et al.  Mesoscopic simulation of selective beam melting processes , 2011 .

[5]  Abdolreza Simchi,et al.  Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features , 2006 .

[6]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[7]  Carolin Körner,et al.  Fundamental consolidation mechanisms during selective beam melting of powders , 2013 .

[8]  Lei Zheng,et al.  Solidification characteristics and segregation behavior of Ni-based superalloy K418 for auto turbocharger turbine , 2013 .

[9]  Helmi Attia,et al.  Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions , 2010 .

[10]  Konrad Wegener,et al.  Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles , 2016 .

[11]  F. Calignano,et al.  Direct fabrication of joints based on direct metal laser sintering in aluminum and titanium alloys , 2014 .

[12]  Ming Pang,et al.  Research on laser welding of cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft , 2008 .

[13]  Christian Coddet,et al.  Investigation of the laser–powder–atmosphere interaction zone during the selective laser melting process , 2015 .

[14]  S. Pannala,et al.  The metallurgy and processing science of metal additive manufacturing , 2016 .

[15]  Jie Yin,et al.  Simulation of temperature distribution in single metallic powder layer for laser micro-sintering , 2012 .

[16]  Jun Hu,et al.  An analytical model based on the similarity in temperature distributions in laser forming , 2007 .

[17]  Zhonghao Rao,et al.  Numerical study on solid–liquid phase change in paraffin as phase change material for battery thermal management , 2016 .

[18]  Artur Mateus,et al.  Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting , 2016 .

[19]  J. Kruth,et al.  Modelling of radiation transfer in metallic powders at laser treatment , 2005 .

[20]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .

[21]  C. Kamath,et al.  Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges , 2015 .

[22]  Yu Zou,et al.  Thermophysical Phenomena in Metal Additive Manufacturing by Selective Laser Melting: Fundamentals, Modeling, Simulation and Experimentation , 2017, ArXiv.

[23]  Vinod Yadava,et al.  Finite element analysis of temperature distribution in single metallic powder layer during metal laser sintering , 2007 .

[24]  Carolin Körner,et al.  Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods , 2014 .

[25]  Richard M. Everson,et al.  Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting , 2013 .

[26]  Chandrika Kamath,et al.  Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing , 2014 .

[27]  D. F. Farson,et al.  Simulation of Weld Pool Dynamics in the Stationary Pulsed Gas Metal Arc Welding Process and Final Weld Shape A computer simulation accurately predicts weld pool fluid flow convection and final weld shape , 2006 .

[28]  Pei Wei,et al.  Thermal behavior in single track during selective laser melting of AlSi10Mg powder , 2017 .

[29]  Pengpeng Yuan,et al.  Particulate migration behavior and its mechanism during selective laser melting of TiC reinforced Al matrix nanocomposites , 2015 .

[30]  S. Na,et al.  Theoretical analysis of keyhole dynamics in polarized laser drilling , 2007 .

[31]  D. Gu,et al.  Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi10Mg composites , 2016 .

[32]  D. Gu,et al.  Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments , 2014 .

[33]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[34]  Guanqun Yu,et al.  Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy , 2017 .

[35]  K. Salonitis,et al.  Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review , 2017 .

[36]  Zhi-hong Xu,et al.  Artemisinin and plant secondary metabolism , 2016 .

[37]  D. Gu,et al.  Parametric analysis of thermal behavior during selective laser melting additive manufacturing of aluminum alloy powder , 2014 .

[38]  A. Matsunawa,et al.  The role of recoil pressure in energy balance during laser materials processing , 1997 .

[39]  Carolin Körner,et al.  Lattice Boltzmann model for thermal free surface flows with liquid-solid phase transition , 2011 .

[40]  A. Foroozmehr,et al.  Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed , 2016 .

[41]  V. Voller,et al.  A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems , 1987 .

[42]  Zhen Chen,et al.  The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior , 2017 .

[43]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[44]  A. Rubenchik,et al.  Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones , 2015, 1512.02593.

[45]  L. Shaw,et al.  Finite element analysis of the effect of volume shrinkage during laser densification , 2005 .