Stabilization of high-voltage layered oxide cathode by utilizing residual lithium to form NASICON-type nanoscale functional coating

[1]  Limin Wang,et al.  Anti-catalytic and zincophilic layers integrated zinc anode towards efficient aqueous batteries for ultra-long cycling stability , 2022, Nano Research.

[2]  Mingliang Du,et al.  Interatomic Electronegativity Offset Dictates Selectivity When Catalyzing the CO2 Reduction Reaction , 2022, Advanced Energy Materials.

[3]  Bingbing Tian,et al.  Constructing stable Li-solid electrolyte interphase to achieve dendrites-free solid-state battery: A nano-interlayer/Li pre-reduction strategy , 2022, Nano Research.

[4]  J. Hsu,et al.  Improving stability of MXenes , 2022, Nano Research.

[5]  G. Gao,et al.  Unraveling the electronegativity-dominated intermediate adsorption on high-entropy alloy electrocatalysts , 2022, Nature Communications.

[6]  Zonghai Chen,et al.  Targeted Masking Enables Stable Cycling of LiNi0.6Co0.2Mn0.2O2 at 4.6V , 2022, Nano Energy.

[7]  Xiangming He,et al.  Cobalt‐Free Cathode Materials: Families and their Prospects , 2022, Advanced Energy Materials.

[8]  Dingsheng Wang,et al.  Strain Relaxation in Metal Alloy Catalysts Steers the Product Selectivity of Electrocatalytic CO2 Reduction. , 2022, ACS nano.

[9]  Yan Sun,et al.  Stabilizing effects of atomic Ti doping on high-voltage high-nickel layered oxide cathode for lithium-ion rechargeable batteries , 2022, Nano Research.

[10]  Xingyi Huang,et al.  Dielectric polymer based electrolytes for high-performance all-solid-state lithium metal batteries , 2022, Journal of Energy Chemistry.

[11]  Limin Wang,et al.  Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials. , 2021, ACS applied materials & interfaces.

[12]  Xifei Li,et al.  Sodium Doping Derived Electromagnetic Center of Lithium Layered Oxide Cathode Materials with Enhanced Lithium Storage , 2021, Nano Energy.

[13]  P. Notten,et al.  A Review of Degradation Mechanisms and Recent Achievements for Ni‐Rich Cathode‐Based Li‐Ion Batteries , 2021, Advanced Energy Materials.

[14]  Dingsheng Wang,et al.  Bringing catalytic order out of chaos with nitrogen-doped ordered mesoporous carbon , 2021, Matter.

[15]  Mingliang Du,et al.  Isolation of Metalloid Boron Atoms in Intermetallic Carbide Boosts the Catalytic Selectivity for Electrocatalytic N2 Fixation , 2021, Advanced Energy Materials.

[16]  Junliang Zhang,et al.  Hydrogen-assisted scalable preparation of ultrathin Pt shells onto surfactant-free and uniform Pd nanoparticles for highly efficient oxygen reduction reaction in practical fuel cells , 2021, Nano Research.

[17]  Xueping Gao,et al.  Building the Stable Oxygen Framework in High‐Ni Layered Oxide Cathode for High‐Energy‐Density Li‐Ion Batteries , 2021 .

[18]  Huiling Zhao,et al.  Enhancing the structure stability of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via encapsulating in negative thermal expansion nanocrystalline shell , 2021 .

[19]  Limin Wang,et al.  A highly promising high-nickel low-cobalt lithium layered oxide cathode material for high-performance lithium-ion batteries. , 2021, Journal of colloid and interface science.

[20]  Jaephil Cho,et al.  Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries , 2021, Nature Energy.

[21]  A. Manthiram,et al.  A review on the stability and surface modification of layered transition-metal oxide cathodes , 2021, Materials Today.

[22]  Tongchao Liu,et al.  Understanding Co roles towards developing Co-free Ni-rich cathodes for rechargeable batteries , 2021, Nature Energy.

[23]  A. Manthiram,et al.  Unraveling the Intricacies of Residual Lithium in High-Ni Cathodes for Lithium-Ion Batteries , 2021 .

[24]  P. He,et al.  Oxygen vacancy promising highly reversible phase transition in layered cathodes for sodium-ion batteries , 2021, Nano Research.

[25]  Jiujun Zhang,et al.  An overview of modification strategies to improve LiNi0·8Co0·1Mn0·1O2 (NCM811) cathode performance for automotive lithium-ion batteries , 2021 .

[26]  Xifei Li,et al.  Functional Passivation Interface of LiNi0.8Co0.1Mn0.1O2 toward Superior Lithium Storage , 2021, Advanced Functional Materials.

[27]  Jun Chen,et al.  Recent breakthroughs and perspectives of high-energy layered oxide cathode materials for lithium ion batteries , 2020 .

[28]  X. Sun,et al.  Surface engineering of LiNi0.8Mn0.1Co0.1O2 towards boosting lithium storage: Bimetallic oxides versus monometallic oxides , 2020 .

[29]  Hyunchul Kim,et al.  Stabilizing effects of Al-doping on Ni-rich LiNi0.80Co0.15Mn0.05O2 cathode for Li rechargeable batteries , 2020 .

[30]  Yong Liu,et al.  An ultrasound-triggered cation chelation and reassembly route to one-dimensional Ni-rich cathode material enabling fast charging and stable cycling of Li-ion batteries , 2020, Nano Research.

[31]  Min‐Sik Park,et al.  Bi-functional Surface Coating of LiNbO3 on High-Ni Layered Cathode Materials for Lithium Ion Batteries. , 2020, ACS applied materials & interfaces.

[32]  Z. Wen,et al.  Improved electrochemical property of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via in-situ ZrO2 coating for high energy density lithium ion batteries , 2020, Chemical Engineering Journal.

[33]  A. Cao,et al.  Dielectric Polarization in Inverse Spinel‐Structured Mg2TiO4 Coating to Suppress Oxygen Evolution of Li‐Rich Cathode Materials , 2020, Advanced materials.

[34]  Zhen-guo Wu,et al.  Interfacial Regulation of Ni-Rich Cathode Materials with Ion Conductive and Pillaring Layer by Infusing Gradient Boron for Improved Cycle Stability. , 2020, ACS applied materials & interfaces.

[35]  Evan M. Erickson,et al.  High-nickel layered oxide cathodes for lithium-based automotive batteries , 2020 .

[36]  Yunjiao Li,et al.  Enhancement on structural stability of Ni-rich cathode materials by in-situ fabricating dual-modified layer for lithium-ion batteries , 2019, Nano Energy.

[37]  A. Manthiram,et al.  A Comprehensive Analysis of the Interphasial and Structural Evolution over Long‐Term Cycling of Ultrahigh‐Nickel Cathodes in Lithium‐Ion Batteries , 2019, Advanced Energy Materials.

[38]  Minmin Chen,et al.  A novel synthesis strategy to improve cycle stability of LiNi0.8Mn0.1Co0.1O2 at high cut-off voltages through core-shell structuring , 2019, Nano Research.

[39]  Jong‐Won Lee,et al.  Mitigating storage-induced degradation of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material by surface tuning with phosphate , 2019, Ceramics International.

[40]  L. Mai,et al.  The Holy Grail in Platinum‐Free Electrocatalytic Hydrogen Evolution: Molybdenum‐Based Catalysts and Recent Advances , 2019, ChemElectroChem.

[41]  Yan Chen,et al.  Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries , 2019, Journal of Power Sources.

[42]  Yunlong Zhao,et al.  Sisyphus effects in hydrogen electrochemistry on metal silicides enabled by silicene subunit edge. , 2019, Science bulletin.

[43]  Ling-jun Guo,et al.  Correlating structural changes of the improved cyclability upon Nd-substitution in LiNi0.5Co0.2Mn0.3O2 cathode materials , 2019, Energy Storage Materials.

[44]  Xiangming He,et al.  New Organic Complex for Lithium Layered Oxide Modification: Ultrathin Coating, High-Voltage, and Safety Performances , 2019, ACS Energy Letters.

[45]  Mingyuan Ge,et al.  Simultaneously Dual Modification of Ni‐Rich Layered Oxide Cathode for High‐Energy Lithium‐Ion Batteries , 2019, Advanced Functional Materials.

[46]  Arumugam Manthiram,et al.  A Mg-Doped High-Nickel Layered Oxide Cathode Enabling Safer, High-Energy-Density Li-Ion Batteries , 2019, Chemistry of Materials.

[47]  J. Janek,et al.  Molecular Surface Modification of NCM622 Cathode Material Using Organophosphates for Improved Li-Ion Battery Full-Cells. , 2018, ACS applied materials & interfaces.

[48]  Wangda Li,et al.  Facilitating the Operation of Lithium-ion Cells with High-nickel Layered Oxide Cathodes with a Small Dose of Aluminum , 2018 .

[49]  Kai Xi,et al.  Challenges and Perspectives for NASICON‐Type Electrode Materials for Advanced Sodium‐Ion Batteries , 2017, Advances in Materials.

[50]  Wei Liu,et al.  Atomic Layer Deposition of Stable LiAlF4 Lithium Ion Conductive Interfacial Layer for Stable Cathode Cycling. , 2017, ACS nano.

[51]  Siyang Liu,et al.  Enhancing Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2 by Lithium-ion Conductor Surface Modification , 2017 .

[52]  Zhian Zhang,et al.  Alleviating Surface Degradation of Nickel-Rich Layered Oxide Cathode Material by Encapsulating with Nanoscale Li-Ions/Electrons Superionic Conductors Hybrid Membrane for Advanced Li-Ion Batteries. , 2016, ACS applied materials & interfaces.

[53]  Min-Joon Lee,et al.  Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.