Polysulfone membranes blended with ZnO nanoparticles for reducing fouling by oleic acid

Abstract Polysulfone ( PSf ) membranes are undesirably hydrophobic, thus they are susceptible to the fouling by most organic components including fatty acids. In this work, ZnO nanoparticles were blended into PSf membranes to improve its properties in reduction of fouling by oleic acid. The casting solution was prepared by dispersing 1–4 wt.% of ZnO nanoparticles (21–23 nm), 1 wt.% of PVA and PSf into 1-methyl-2-pyrrolidinone at 75 °C, with a stirring speed of 400 rpm. The weight ratio of polymer to solvent is maintained at 1:4.84. The composite membranes were then prepared using phase inversion method. The mean pore size of the composite membranes is slightly larger than the mean pore size of pure PSf membrane. However, the water contact angle greatly reduces from 85° to 63° when 2 wt.% of ZnO is added into Pf-2 membranes. Thermal stability of PSf membranes has significantly improved with the addition of ZnO. Although absorption peaks of ZnO are absent in FT-IR patterns, EDX analysis shows that ZnO nanoparticles are well distributed in the dense layer of Pf-2 membrane. Hence, Pf-2 membranes show the highest permeability and the least fouling by oleic acid.

[1]  A. Mayes,et al.  Polysulfone-graft-poly(ethylene glycol) graft copolymers for surface modification of polysulfone membranes. , 2006, Biomaterials.

[2]  M. E. D. Zaniquelli,et al.  Morphology of nanometric size particulate aluminium-doped zinc oxide films , 2002 .

[3]  G. Belfort,et al.  Surface modification of ultrafiltration membranes by low temperature plasma II. Graft polymerization onto polyacrylonitrile and polysulfone , 1996 .

[4]  J. Schrotter,et al.  Current and Emerging Membrane Processes for Water Treatment , 2010 .

[5]  A. Mohammad,et al.  Optimizing the incorporation of silica nanoparticles in polysulfone/poly(vinyl alcohol) membranes with response surface methodology , 2011 .

[6]  A. Mohammad,et al.  Polymeric membranes incorporated with metal/metal oxide nanoparticles: A comprehensive review , 2013 .

[7]  A. Higuchi,et al.  Separation of proteins by surface modified polysulfone membranes , 1991 .

[8]  J. Vienken.  Membranes in Hemodialysis , 2010 .

[9]  Tae-Hyun Bae,et al.  Preparation of TiO2 self-assembled polymeric nanocomposite membranes and examination of their fouling mitigation effects in a membrane bioreactor system , 2005 .

[10]  Kyunga Na,et al.  Restriction of biofouling in membrane filtration using a brush-like polymer containing oligoethylene glycol side chains , 2006 .

[11]  J. Sheng,et al.  Surface modification of polysulfone membranes by low‐temperature plasma–graft poly(ethylene glycol) onto polysulfone membranes , 2000 .

[12]  M. Zafar,et al.  Influence of glycol additives on the structure and performance of cellulose acetate/zinc oxide blend membranes , 2011 .

[13]  I. Genné,et al.  Effect of the addition of ZrO2 to polysulfone based UF membranes , 1996 .

[14]  Junrong Zheng,et al.  Disruption of self-assembly and altered mechanical behavior in polyurethane/zinc oxide nanocomposites , 2005 .

[15]  Michael V. Liga,et al.  Antimicrobial nanomaterials for water disinfection and microbial control: potential applications and implications. , 2008, Water research.

[16]  Jixiao Wang,et al.  Performance improvement of polysulfone ultrafiltration membrane by blending with polyaniline nanofibers , 2008 .

[17]  G. Luo,et al.  Preparation of cellulose acetate membrane filled with metal oxide particles for the pervaporation separation of methanol/methyl tert-butyl ether mixtures , 2009 .

[18]  H. Iwata,et al.  Preparation of anti-oil stained membrane by grafting polyethylene glycol macromer onto polysulfone membrane , 1994 .

[19]  Yuqing Zhang,et al.  Preparation and characterization of novel Ce-doped nonstoichiometric nanosilica/polysulfone composite membranes , 2008 .

[20]  Jooheon Kim,et al.  Miscibility of polysulfone blends with poly(1‐vinylpyrrolidone‐co‐styrene) copolymers and their interaction energies , 2003 .

[21]  M. A. Majid,et al.  Functionalized PSf/SiO2 nanocomposite membrane for oil-in-water emulsion separation , 2011 .

[22]  A. Higuchi,et al.  Serum protein adsorption and platelet adhesion on pluronic-adsorbed polysulfone membranes. , 2003, Biomaterials.

[23]  A. Mohammad,et al.  Flux decline study during ultrafiltration of glycerin-rich fatty acid solutions , 2010 .

[24]  P. Cui,et al.  Development of a sulfated Y-doped nonstoichiometric zirconia/polysulfone composite membrane for treatment of wastewater containing oil , 2009 .

[25]  Guodong Zhang,et al.  Study on Ce-Doped Nonstoichiometric Nanosilica for Promoting Properties of Polysulfone Membranes , 2010 .

[26]  Bart Van der Bruggen,et al.  A new outlook on membrane enhancement with nanoparticles: The alternative of ZnO , 2012 .

[27]  Jeonghwan Kim,et al.  Effect of nanoparticle aggregation at low concentrations of TiO2 on the hydrophilicity, morphology, and fouling resistance of PES-TiO2 membranes. , 2011, Journal of colloid and interface science.

[28]  Peng Wang,et al.  The influence of nano-sized TiO2 fillers on the morphologies and properties of PSF UF membrane , 2007 .

[29]  Jeonghwan Kim,et al.  Doping of polyethersulfone nanofiltration membranes: antifouling effect observed at ultralow concentrations of TiO2 nanoparticles , 2011 .

[30]  P. Pal,et al.  Synthesis and characterization of cellulose acetate-polysulfone blend microfiltration membrane for separation of microbial cells from lactic acid fermentation broth , 2009 .

[31]  A. Mohammad,et al.  Polysulfone/Pluronic F127 Blend Ultrafiltration Membranes: Preparation and Characterizations , 2010 .