A 2-D PVDF force sensing system for micro-manipulation and micro-assembly

Despite the enormous research efforts in creating new applications with MEMS, the research efforts at the backend such as packaging and assembly are relatively limited. We present our ongoing development of a polyvinylidene fluoride (PVDF) multi-direction micro-force sensing system that can be potentially used for force-reflective manipulation of micro-mechanical devices or micro-organisms over remote distances. Thus far, we have successfully demonstrated 1D and 2D sensing systems that are able to sense force information when a micro-manipulation probe-tip is used to lift a micro mass supported by 2 /spl mu/m/spl times/30 /spl mu/m/spl times/200 /spl mu/m polysilicon beams. Hence, we have shown that force detection in the 50 /spl mu/N range is possible with PVDF sensors integrated with commercial micro-manipulation probe-tips.

[1]  Fumihito Arai,et al.  New force measurement and micro grasping method using laser Raman spectrophotometer , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[2]  Sergej Fatikow,et al.  Force sensing in microrobotic systems-an overview , 1998 .

[3]  R. Howe,et al.  Hexsil tweezers for teleoperated micro-assembly , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[4]  Hideki Hashimoto,et al.  Tele-touch feedback of surfaces at the micro/nano scale: modeling and experiments , 1999, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289).

[5]  M. F. Barsky,et al.  Robot gripper control system using PVDF piezoelectric sensors , 1989, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[6]  John D. Mai,et al.  A foundry fabricated high-speed rotation sensor using off-chip RF wireless signal transmission , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[7]  S. Koelemijer Chollet,et al.  Cost effective micro-system assembly automation , 1999, 1999 7th IEEE International Conference on Emerging Technologies and Factory Automation. Proceedings ETFA '99 (Cat. No.99TH8467).

[8]  P. Benech,et al.  Acceleration measurement using PVDF , 1996, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[9]  Mamoru Mitsuishi,et al.  A tele-micro machining system with operational environment transmission under a stereo-SEM , 1996, Proceedings of IEEE International Conference on Robotics and Automation.