A new design of an integrated two-stage class-F power amplifier (PA) for wireless application operating in the 1.65 GHz frequency range is described. The circuit utilizes a simple method to drive the output stage with a half sinusoidal waveform that is optimal for class-F operation. The circuit was fabricated in a Silterra's standard 0.18 mum RF CMOS technology. Measurement result shows a maximum power-added efficiency (PAE) of 42% and a maximum gain of 19.7 dB. When operating from a 3 V voltage supply, the PA delivers an output power of 18.9 dBm. This work demonstrates the feasibility of using class-F PAs for short-range and low-power applications.
[1]
S. Gao,et al.
High efficiency class-F RF/microwave power amplifiers
,
2006,
IEEE Microwave Magazine.
[2]
F. Raab.
Class-E, Class-C, and Class-F power amplifiers based upon a finite number of harmonics
,
2001
.
[3]
C. Trask,et al.
Class-F amplifier loading networks: a unified design approach
,
1999,
1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).
[4]
F. Raab.
Maximum efficiency and output of class-F power amplifiers
,
2001
.
[5]
F. Raab.
Class-F power amplifiers with maximally flat waveforms
,
1997
.