Abstract This paper presents a lowpass-bandpass diplexer based on a novel microstrip structure. The lowpass channel is appropriate for wireless applications with a cut-off frequency at 2.4 GHz while the bandpass channel is located at 4.2 GHz for WiMAX applications. The lowpass channel is created by a novel structure, which is proposed for the first time in this work. A novel combination of thin transmission lines, rectangular and triangular patches is used to make the bandpass channel. The lowpass and bandpass filters are integrated by a compact simple transmission line. The diplexer structure is well miniaturized with an overall size of 0.036 λg2. The proposed diplexer has the most compact size in comparison with the previous lowpass-bandpass diplexers. Moreover, the insertion losses at both channels are better than 0.18 dB, while the return losses at the lower and upper channels are 18.2 dB and 41.4 dB respectively. In comparison with the previous works, the designed diplexer has the lowest insertion and return losses. To confirm the simulation results, the introduced diplexer is fabricated and measured.
[1]
Leila Noori,et al.
Compact low-loss microstrip diplexer using novel engraved semi-patch cells for GSM and WLAN applications
,
2018
.
[2]
Pu-Hua Deng,et al.
Design of Microstrip Lowpass-Bandpass Diplexer
,
2013,
IEEE Microwave and Wireless Components Letters.
[4]
Leila Noori,et al.
Novel compact microstrip diplexer for GSM applications
,
2018
.
[5]
Yo-Shen Lin,et al.
Lumped-Element Coplanar-Waveguide Diplexer
,
2002,
2002 32nd European Microwave Conference.
[6]
M. H. Capstick,et al.
Microstrip lowpass-bandpass diplexer topology
,
1999
.
[8]
Yi-Chyun Chiang,et al.
Microstrip Diplexer Constructed With New Types of Dual-Mode Ring Filters
,
2015,
IEEE Microwave and Wireless Components Letters.
[9]
Leila Noori,et al.
Design of microstrip wide stopband quad-band bandpass filters for multi-service communication systems
,
2017
.