Converter-Level Integration for Wide Band-Gap Automotive Power Electronics

Abstract Wide band-gap (WBG) semiconductors offer many potential benefits to designers of power electronic systems. Lower switching losses allow operation at higher switching frequencies, which in ...

[1]  C. Mark Johnson,et al.  Integrated Half-Bridge Switch Using 70- $\mu\hbox{m}$-Thin Devices and Hollow Interconnects , 2015, IEEE Transactions on Industry Applications.

[2]  R. Fillion,et al.  High frequency, low cost, power packaging using thin film power overlay technology , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[3]  P. Beckedahl,et al.  Novel packaging technology for power modules , 2012, 2012 IEEE International Symposium on Industrial Electronics.

[4]  Bassem Mouawad,et al.  Novel Silicon Carbide Integrated Power Module for EV application , 2018, 2018 1st Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia).

[5]  A. Ostmann,et al.  Packaging Very Fast Switching Semiconductors , 2014 .

[6]  Xu Chen,et al.  Low-temperature and Pressureless Sintering Technology for High-performance and High-temperature Interconnection of Semiconductor Devices , 2007, 2007 International Conference on Thermal, Mechanical and Multi-Physics Simulation Experiments in Microelectronics and Micro-Systems. EuroSime 2007.

[7]  Alberto Castellazzi,et al.  Built-in Reliability Design of Highly Integrated Solid-State Power Switches With Metal Bump Interconnects , 2015, IEEE Transactions on Power Electronics.

[8]  Mark Johnson,et al.  IEEE ITRW Working Group Position Paper-Packaging and Integration: Unlocking the Full Potential of Wide-Bandgap Devices , 2018, IEEE Power Electronics Magazine.

[9]  C. M. Johnson,et al.  Time-Efficient Sintering Processes to Attach Power Devices Using Nanosilver Dry Film , 2017 .

[10]  Mustansir H. Kheraluwala,et al.  A new power module packaging technology for enhanced thermal performance , 2000, ITHERM 2000. The Seventh Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.00CH37069).

[11]  G. Lu,et al.  Pressureless sintering of nanosilver paste at low temperature to join large area (≥100mm2) power chips for electronic packaging , 2014 .

[12]  Mark Johnson,et al.  Highly-integrated power cell for high-power wide band-gap power converters , 2017, 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia (IFEEC 2017 - ECCE Asia).

[13]  David Frey,et al.  Optimized Power Modules for Silicon Carbide mosfet , 2018, IEEE Transactions on Industry Applications.

[14]  Jingru Dai,et al.  Improved Reliability of Planar Power Interconnect With Ceramic-Based Structure , 2018, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[15]  U. Scheuermann,et al.  Reliability of Planar SKiN Interconnect Technology , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).