Removal of Broken Hardware

Abstract Despite advances in metallurgy, fatigue failure of hardware is common when a fracture fails to heal. Revision procedures can be difficult, usually requiring removal of intact or broken hardware. Several different methods may need to be attempted to successfully remove intact or broken hardware. Broken intramedullary nail cross‐locking screws may be advanced out by impacting with a Steinmann pin. Broken open‐section (Küntscher type) intramedullary nails may be removed using a hook. Closed‐section cannulated intramedullary nails require additional techniques, such as the use of guidewires or commercially available extraction tools. Removal of broken solid nails requires use of a commercial ratchet grip extractor or a bone window to directly impact the broken segment. Screw extractors, trephines, and extraction bolts are useful for removing stripped or broken screws. Cold‐welded screws and plates can complicate removal of locked implants and require the use of carbide drills or high‐speed metal cutting tools. Hardware removal can be a time‐consuming process, and no single technique is uniformly successful.

[1]  W. Obremskey,et al.  Hardware Removal: Indications and Expectations , 2006, The Journal of the American Academy of Orthopaedic Surgeons.

[2]  S. Doig,et al.  Technical difficulty of metal removal after LISS plating. , 2004, Injury.

[3]  G. Degnan,et al.  A technique for removing a fractured interlocking tibial nail. , 1988, Journal of orthopaedic trauma.

[4]  C. Krettek,et al.  Recurrent rotational deformity of the femur after static locking of intramedullary nails: case reports. , 1997, The Journal of bone and joint surgery. British volume.

[5]  M. Bosse,et al.  Removal of a broken Synthes proximal spiral blade. , 1998, Journal of orthopaedic trauma.

[6]  E. Steinberg,et al.  Removal of a Broken Distal Closed Section Intramedullary Nail: Report of a Case Using a Simple Method , 2004, Journal of orthopaedic trauma.

[7]  D. K. Scheid,et al.  A Modified Technique for Removing a Bent Intramedullary Nail Minimizing Bone and Soft Tissue Dissection , 1994, Journal of orthopaedic trauma.

[8]  Nicholas K. Gove,et al.  Removal of the Less Invasive Stabilization System , 2004, Journal of orthopaedic trauma.

[9]  M. Bosse,et al.  Retrograde removal of an incarcerated solid titanium femoral nail after subtrochanteric fracture. , 2003, Journal of orthopaedic trauma.

[10]  R. M. Smith,et al.  Removal of the retained fragment of broken solid nails by the intra-medullary route. , 2001, Injury.

[11]  K. Yang,et al.  Removal of a broken intramedullary nail with a narrow hollow. , 2006, Journal of orthopaedic trauma.

[12]  C. Krettek,et al.  Removal of a Broken Solid Femoral Nail: a Simple Push-out Technique. A Case Report* , 1997, The Journal of bone and joint surgery. American volume.

[13]  T. Apivatthakakul,et al.  Percutaneous removal of a bent intramedullary nail. , 2001, Injury.

[14]  N. Gjerdet,et al.  Slippage Between Screwdriver and Bone Screw , 2002, Clinical orthopaedics and related research.

[15]  S. Benirschke,et al.  Broken intramedullary nails. , 1988, The Journal of bone and joint surgery. American volume.

[16]  D Seligson,et al.  Technique for removal of broken interlocking screws. , 2001, Journal of orthopaedic trauma.

[17]  G. Charnley,et al.  Laparoscopic forceps removal of a broken tibial intramedullary nail. , 1998, Injury.

[18]  R. Patterson,et al.  Technique for treatment of a bent Russell-Taylor femoral nail. , 1991, Journal of orthopaedic trauma.

[19]  Mohammed Aqeel Bhutta,et al.  A simple technique for removal of screws with damaged heads. , 2003, Annals of the Royal College of Surgeons of England.