Wearable Pulse Oximetry in Construction Environments

[1]  H. L. Gray,et al.  Lower Confidence Limits for Availability Assuming Lognormally Distributed Repair Times , 1969 .

[2]  Y Mendelson,et al.  Design and evaluation of a new reflectance pulse oximeter sensor. , 1988, Medical instrumentation.

[3]  Bianca Schroeder,et al.  A Large-Scale Study of Failures in High-Performance Computing Systems , 2006, IEEE Transactions on Dependable and Secure Computing.

[4]  T E Bernard,et al.  Modeling carbon monoxide uptake during work. , 1981, American Industrial Hygiene Association journal.

[5]  P Tikuisis,et al.  Percent carboxyhemoglobin in resting humans exposed repeatedly to 1,500 and 7,500 ppm CO. , 1987, Journal of applied physiology.

[6]  John G. Webster,et al.  Design of Pulse Oximeters , 1997 .

[7]  Y. Mendelson,et al.  Noninvasive pulse oximetry utilizing skin reflectance photoplethysmography , 1988, IEEE Transactions on Biomedical Engineering.

[8]  P Tikuisis,et al.  A critical analysis of the use of the CFK equation in predicting COHb formation. , 1987, American Industrial Hygiene Association journal.

[9]  P. Tikuisis,et al.  Rate of formation of carboxyhemoglobin in exercising humans exposed to carbon monoxide. , 1992, Journal of applied physiology.

[10]  Lei Wang,et al.  Multichannel Reflective PPG Earpiece Sensor With Passive Motion Cancellation , 2007, IEEE Transactions on Biomedical Circuits and Systems.

[11]  H.H. Asada,et al.  Noise Cancellation Model Validation for Reduced Motion Artifact Wearable PPG Sensors Using MEMS Accelerometers , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[12]  Patricia A. Deuster,et al.  Exercise Physiology: Energy, Nutrition and Human Performance , 1991 .

[13]  K. Tremper,et al.  The effect of carbon monoxide inhalation on pulse oximetry and transcutaneous PO2. , 1987, Anesthesiology.

[14]  Linda Forst,et al.  Toxic Inhalation Fatalities of US Construction Workers, 1990 to 1999 , 2002, Journal of occupational and environmental medicine.

[15]  Y. Mendelson,et al.  A Comparative Evaluation of Adaptive Noise Cancellation Algorithms for Minimizing Motion Artifacts in a Forehead-Mounted Wearable Pulse Oximeter , 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[16]  Y. Mendelson,et al.  Measurement site and photodetector size considerations in optimizing power consumption of a wearable reflectance pulse oximeter , 2003, Proceedings of the 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (IEEE Cat. No.03CH37439).

[17]  Robert E. Mullen,et al.  The lognormal distribution of software failure rates: origin and evidence , 1998, Proceedings Ninth International Symposium on Software Reliability Engineering (Cat. No.98TB100257).

[18]  Y. Mendelson,et al.  Effects of motion artifacts on helmet-mounted pulse oximeter sensors , 2004, IEEE 30th Annual Northeast Bioengineering Conference, 2004. Proceedings of the.

[19]  Don J Lofgren,et al.  Occupational carbon monoxide poisoning in the State of Washington, 1994-1999. , 2002, Applied occupational and environmental hygiene.

[20]  Yitzhak Mendelson,et al.  Reflectance Forehead Pulse Oximetry: Effects of Contact Pressure During Walking , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[21]  M. Nitzan,et al.  The measurement of oxygen saturation in arterial and venous blood , 2008, IEEE Instrumentation & Measurement Magazine.

[22]  Russell Paul Dresher,et al.  Wearable Forehead Pulse Oximetry: Minimization of Motion and Pressure Artifacts , 2006 .

[23]  Comparative and evaluative the adaptive filter in motion artifact cancellation of pulse oximetry , 2009, 2009 IEEE 35th Annual Northeast Bioengineering Conference.

[24]  S. Barker,et al.  Measurement of Carboxyhemoglobin and Methemoglobin by Pulse Oximetry: A Human Volunteer Study , 2006, Anesthesiology.

[25]  James R. Lloyd,et al.  On the log‐normal distribution of electromigration lifetimes , 1979 .

[26]  R E Forster,et al.  Considerations of the physiological variables that determine the blood carboxyhemoglobin concentration in man. , 1965, The Journal of clinical investigation.

[27]  Yuan-Ting Zhang,et al.  An Efficient Motion-Resistant Method for Wearable Pulse Oximeter , 2008, IEEE Transactions on Information Technology in Biomedicine.

[28]  Geert Molenberghs,et al.  The time of “guessing” your failure time distribution is over! , 1998 .

[29]  Malwane M. A. Ananda.  Confidence intervals for steady state availability of a system with exponential operating time and lognormal repair time , 2003, Appl. Math. Comput..

[30]  Ki Chang Nam,et al.  Measurement Site and Applied Pressure Consideration in Wrist Photoplethysmography , 2008 .

[31]  L. I. Knight.  Toxicity of Smoke , 1913, Botanical Gazette.

[32]  K. Ashoka Reddy,et al.  Use of Fourier Series Analysis for Motion Artifact Reduction and Data Compression of Photoplethysmographic Signals , 2009, IEEE Transactions on Instrumentation and Measurement.

[33]  H Harry Asada,et al.  Mobile monitoring with wearable photoplethysmographic biosensors. , 2003, IEEE engineering in medicine and biology magazine : the quarterly magazine of the Engineering in Medicine & Biology Society.

[34]  J. E. Peterson,et al.  Predicting the carboxyhemoglobin levels resulting from carbon monoxide exposures. , 1975, Journal of applied physiology.

[35]  H. Asada,et al.  The ring sensor: a new ambulatory wearable sensor for twenty-four hour patient monitoring , 1998, Proceedings of the 20th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. Vol.20 Biomedical Engineering Towards the Year 2000 and Beyond (Cat. No.98CH36286).

[36]  Y. Alarie,et al.  Toxicity of Fire Smoke , 2002, Critical reviews in toxicology.

[37]  M. Nogawa,et al.  A novel hybrid reflectance pulse oximeter sensor with improved linearity and general applicability to various portions of the body , 1998, Proceedings of the 20th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. Vol.20 Biomedical Engineering Towards the Year 2000 and Beyond (Cat. No.98CH36286).

[38]  Y. Mendelson,et al.  Effects of motion artifacts on pulse oximeter readings from different facial regions , 2005, Proceedings of the IEEE 31st Annual Northeast Bioengineering Conference, 2005..

[39]  A THREE-WAVELENGTH PULSE OXIMETER FOR CARBOXYHEMOGLOBIN DETERMINATION , 2008 .

[40]  Y. Mendelson,et al.  Investigation of Signal Processing Algorithms for an Embedded Microcontroller-Based Wearable Pulse Oximeter , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[41]  Malwane M. A. Ananda,et al.  On steady state availability of a system with lognormal repair time , 2004, Appl. Math. Comput..

[42]  S. Barker,et al.  “Motion-Resistant” Pulse Oximetry: A Comparison of New and Old Models , 2002, Anesthesia and analgesia.

[43]  R. Schafer.  Bayesian Reliability Analysis , 1983 .

[44]  H. Harry Asada,et al.  Artifact-resistant power-efficient design of finger-ring plethysmographic sensors , 2001, IEEE Transactions on Biomedical Engineering.

[45]  L. G. Sison,et al.  Characterization and adaptive filtering of motion artifacts in pulse oximetry using accelerometers , 2002, Proceedings of the Second Joint 24th Annual Conference and the Annual Fall Meeting of the Biomedical Engineering Society] [Engineering in Medicine and Biology.