Lateral–torsional buckling of hollow tubular flange plate girders with slender stiffened webs

Abstract This paper is concerned with the assessment of the lateral–torsional buckling (LTB) of hollow tubular flange plate girders (HTFPGs) with slender stiffened webs. Using the general purpose finite element package ABAQUS, 3-D finite element (FE) models for simply supported HTFPGs subjected to uniform bending are built. First, a preliminary analysis is conducted to compare the HTFPGs with their equivalent I-section plate girders with flat flanges (IPGs). The results indicate that the HTFPGs display larger load-carrying capacities and stiffnesses compared to IPGs especially in the elastic LTB range. In addition, it is found that the inelastic LTB dominates the failure mode for higher spans of HTFPGs compared to equivalent IPGs. Consequently, a parametric study for the HTFPGs is carried out considering two key parameters; namely the radius of gyration of the compression–flange and the section modulus. The results showed that using HTFPGs with less slender webs (i.e. with shorter webs) for medium-to-long spans optimizes the girders by reducing their weight. Additionally, to save the fabrication costs via reducing the weld lengths, it is more significant to increase the hollow tubular flange depth. It is as well found that the AISC and EC3 provide highly conservative predictions for the HTFPGs under bending. A modified AISC design method is, therefore, suggested to predict the flexural strength of the HTFPGs. The results predicted by the proposed method show better agreement with the FE strengths than the values predicted by the AISC and EC3.

[1]  Hasan U. Akay,et al.  Lateral and Local Buckling of Beams and Frames , 1977 .

[2]  Kwok-Fai Chung,et al.  Simplified design of composite beams with large web openings to Eurocode 4 , 2001 .

[3]  Mark A. Bradford,et al.  Web distortion and flexural torsional buckling , 1979 .

[4]  Mostafa Fahmi Hassanein,et al.  An extended evaluation for the shear behavior of hollow tubular flange plate girders , 2012 .

[5]  Gregory J. Hancock,et al.  A theoretical investigation of the column behaviour of cold-formed square hollow sections , 1993 .

[6]  Bryan E. Little,et al.  American Association of State Highway and Transportation Officials. Highway Drainage Guidelines American Association of State Highway and Transportation Officials. LRFD Bridge Design Specifications , 2000 .

[7]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[8]  Donald W. White,et al.  Effect of web distortion on the buckling strength of noncomposite discretely-braced steel I-section members , 2007 .

[9]  M. M. Alinia,et al.  Shear failure characteristics of steel plate girders , 2009 .

[10]  C. H. Yoo,et al.  Shear buckling coefficients of plate girder web panels , 1996 .

[11]  Jiho Moon,et al.  Lateral–torsional buckling of I-girders with discrete torsional bracings , 2010 .

[12]  C. R. Hendy,et al.  Designers' Guide to EN 1993-2 Eurocode 3: Design of Steel Structures, Part 2: Steel Bridges , 2007 .

[13]  Chai Hong Yoo,et al.  Analysis and Design of Curved Steel Bridges , 1988 .

[14]  Mahen Mahendran,et al.  Finite-element analysis of hollow flange beams with web stiffeners , 1997 .

[15]  Nuno Silvestre,et al.  Lateral–distortional buckling of hollow tubular flange plate girders with slender unstiffened webs , 2013 .

[16]  Richard Sause,et al.  Flexural strength of tubular flange girders , 2009 .

[17]  E. Gaylord,et al.  Design of Steel Structures , 1972 .

[18]  Richard Sause,et al.  High Performance Steel Girders with Tubular Flanges , 2005 .

[19]  K. F. Chung,et al.  Composite column design to Eurocode 4 : based on DD ENV 1994-1-1: 1994 Eurocode 4: design of composite steel and concrete structures: part 1.1: general rules and rules for buildings , 1994 .

[20]  Mostafa Fahmi Hassanein,et al.  Shear strength and behavior of transversely stiffened tubular flange plate girders , 2010 .

[21]  Nicholas S. Trahair,et al.  The behaviour and design of steel structures , 1977 .

[22]  Richard Sause,et al.  Finite element analysis of curved steel girders with tubular flanges , 2010 .