Full Sheet Control Using Steerable Nips

This paper describes the mechatronics design, prototype testing, and control of a steerable nips component for paper path mechanisms in high-speed color printers and photocopiers. When placed upstream from the image transfer station along the paper path, this device precisely controls the longitudinal, lateral, and skew directions of papers sheets, as they arrive to the image transfer station. The paper also presents a complete kinematic and dynamic analysis of the paper sheet steering mechanism, which is validated by experimental results. It is shown that the dynamics of a sheet under the control of the steerable nips mechanism are nonlinear and subject to nonholonomic constraints. A feedback linearization control strategy that includes dynamic surface control is developed and implemented to control the sheet's position and angular orientation under the condition that the sheet's speed in the longitudinal direction remains positive at all times. Experimental results verify that the steerable nips mechanism under the proposed feedback linearization control strategy is able to meet or exceed all design performance requirements for deployment as a component of an actual printer paper path control mechanism.

[1]  Masayoshi Tomizuka,et al.  Design requirements and reference trajectory generation for a copier paperpath , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).

[2]  Roger F. Gans,et al.  Closed-Loop Control of an Underactuated Sheet Registration Device Using Feedback Linearization and Gain Scheduling , 2008, IEEE Transactions on Control Systems Technology.

[3]  Roberto Horowitz,et al.  A Robust Approach to Dynamic Feedback Linearization for a Steerable Nips Mechanism , 2011 .

[4]  S. Sastry.  Nonlinear Systems: Analysis, Stability, and Control , 1999 .

[5]  Masayoshi Tomizuka,et al.  FULL SHEET CONTROL THROUGH THE USE OF STEER-ABLE NIPS , 2007 .

[6]  Roberto Horowitz,et al.  A Robust Approach to Dynamic Feedback Linearization for a Steerable Nips Mechanism , 2011 .

[7]  Masayoshi Tomizuka,et al.  Convergence Analysis of a Steerable Nip Mechanism for Full Sheet Control in Printing Devices , 2010 .

[8]  M. Tomizuka,et al.  Asynchronous observer for a copier paper path , 1998, Proceedings of the 37th IEEE Conference on Decision and Control (Cat. No.98CH36171).

[9]  M. Tomizuka,et al.  Paper sheet control using steerable nips , 2004, Proceedings of the 2004 American Control Conference.

[10]  M Maarten Steinbuch,et al.  Robust control of piecewise linear systems: A case study in sheet flow control , 2008 .

[11]  J. C. Gerdes,et al.  Dynamic surface control of nonlinear systems , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[12]  Danwei Wang,et al.  Full state tracking and internal dynamics of nonholonomic wheeled mobile robots , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[13]  Masayoshi Tomizuka,et al.  Intersheet spacing control and controllability of a copier paper path , 1998, Proceedings of the 1998 IEEE International Conference on Control Applications (Cat. No.98CH36104).

[14]  C. A. Desoer,et al.  Nonlinear Systems Analysis , 1978 .

[15]  G. Campion,et al.  Controllability and State Feedback Stabilizability of Nonholonomic Mechanical Systems , 1991 .

[16]  Masayoshi Tomizuka,et al.  Full Paper Sheet Control Using Hybrid Automata , 2004, HSCC.

[17]  Yangsheng Xu,et al.  Stabilization and path following of a single wheel robot , 2004, IEEE/ASME Transactions on Mechatronics.

[18]  Per Tunestål,et al.  Hybrid control of a manufacturing transport system , 1997, Proceedings of the 36th IEEE Conference on Decision and Control.

[19]  Masayoshi Tomizuka,et al.  A mechatronic approach to full sheet control using steer-able Nips , 2006 .

[20]  Masayoshi Tomizuka,et al.  A hybrid control scheme for a copier paperpath , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[21]  Nilanjan Sarkar,et al.  Dynamic feedback control of vehicles with two steerable wheels , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[22]  M. Steinbuch,et al.  A piecewise linear approach towards sheet control in a printer paper path , 2006, 2006 American Control Conference.

[23]  Sudhendu Rai,et al.  A hybrid hierarchical control architecture for paper transport systems , 1998, Proceedings of the 37th IEEE Conference on Decision and Control (Cat. No.98CH36171).

[24]  Masayoshi Tomizuka,et al.  A Mechatronics Approach to Copier Paperpath Control , 2000 .

[25]  M. Tomizuka,et al.  Interobject spacing control and controllability of a manufacturing transportation system , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[26]  Richard M. Murray,et al.  A Mathematical Introduction to Robotic Manipulation , 1994 .