Novel microwave reactor equipment using internal transmission line (INTLI) for efficient liquid phase chemistries: A study-case of polyester preparation

Abstract In this work, we demonstrate the application of a novel type of microwave equipment using internal transmission line (INTLI) to liquid phase chemistries. Contrary to common cavity-based microwave equipment, where the reactor is exposed to a standing microwave field formed in a confined space, the INTLI technology allows for irradiation of the liquid phase from the interior of the reactor, thereby enabling better coupling of the microwave energy with the liquid mixture. The model reaction system studied is a polyesterification reaction of industrial relevance. The INTLI reactor is compared with a common type of multimode cavity in terms of specific energy consumption. The total specific energy consumption with the INTLI reactor is considerably lower owing to the ability to optimize/adapt the microwave power dissipated in the liquid mixture and to minimize the lost (reflected) power that is scattered off the liquid mixture and sent back toward the magnetron. For the studied reactor system and conditions, the total energy consumption with the INTLI reactor was up to a factor two lower (at the beginning of the reaction) compared to the multimode cavity. Optimized (lower) usage of microwave power during the process and effective scale up possibility are inherent advantages of the INTLI reactor technology over cavity-based microwave equipment.

[1]  N. G. Patil,et al.  Copper(0) in the Ullmann heterocycle-aryl ether synthesis of 4-phenoxypyridine using multimode microwave heating , 2010 .

[2]  Timothy E. Long,et al.  Modern polyesters : chemistry and technology of polyesters and copolyesters , 2004 .

[3]  C. Kappe,et al.  Scale-Up of Microwave-Assisted Reactions in a Multimode Bench-Top Reactor , 2011 .

[4]  M. Mehdizadeh.  Engineering and scale-up considerations for microwave induced reactions , 1994 .

[5]  Tom Van Gerven,et al.  On the parametric sensitivity of heat generation by resonant microwave fields in process fluids , 2013 .

[6]  C. Oliver Kappe,et al.  A critical assessment of the greenness and energy efficiency of microwave-assisted organic synthesis , 2011 .

[7]  J. Vekemans,et al.  A Facile Microwave-Mediated Drying Process of Thermally Unstable / Labile Products , 2010 .

[8]  A. Stankiewicz,et al.  Microwave-Promoted Synthesis of n-Propyl Propionate using Homogeneous Zinc Triflate Catalyst , 2012 .

[9]  B. Krieger-Brockett.  Microwave pyrolysis of biomass , 1994 .

[10]  Ashley J. Wilson,et al.  The preparation of high-grade bio-oils through the controlled, low temperature microwave activation of wheat straw. , 2009, Bioresource technology.

[11]  D. Michael P. Mingos,et al.  Applications of Microwave Dielectric Heating Effects to Synthetic Problems in Chemistry , 1991 .

[12]  O. Shishkin,et al.  Beneficial energy-efficiencies in the microwave-assisted vacuum preparation of polyphosphoric acid , 2011 .

[13]  Tom Van Gerven,et al.  On the accuracy and reproducibility of fiber optic (FO) and infrared (IR) temperature measurements of solid materials in microwave applications , 2010 .

[14]  Tom Van Gerven,et al.  Microwave-activated methanol steam reforming for hydrogen production , 2011 .

[15]  Tom Van Gerven,et al.  On the effect of resonant microwave fields on temperature distribution in time and space , 2012 .

[16]  A. Stankiewicz,et al.  Influence of microwave irradiation on a polyesterification reaction , 2009 .

[17]  Heikki Haario,et al.  Polyesterification kinetics of complex mixtures in semibatch reactors , 2001 .

[18]  A. Stankiewicz,et al.  Process Intensification of reactive distillation for the synthesis of n-propyl propionate: the effects of microwave radiation on molecular separation and esterification reaction , 2010 .

[19]  M. J. Cocero,et al.  A predictive approach in modeling and simulation of heat and mass transfer during microwave heating. Application to SFME of essential oil of Lavandin Super , 2012 .