An innovative corrosion evaluation technique for reinforced concrete structures using magnetic sensors

[1]  Xiaoyu Gu,et al.  Investigations on response time of magnetorheological elastomer isolator for real-time control implementation , 2016 .

[2]  G. Zi,et al.  Probabilistic analysis of reinforcement corrosion due to the combined action of carbonation and chloride ingress in concrete , 2016 .

[3]  Masayasu Ohtsu,et al.  Elastic wave methods for NDE in concrete based on generalized theory of acoustic emission , 2016 .

[4]  Xiao-hui Wang,et al.  Corrosion behavior of epoxy-coated reinforced bars in RC test specimens subjected to pre-exposure loading and wetting-drying cycles , 2016 .

[5]  H. Lv,et al.  Degradation model of bond performance between deteriorated concrete and corroded deformed steel bars , 2016 .

[6]  W. Jin,et al.  Corrosion-induced concrete cracking model considering corrosion product-filled paste at the concrete/steel interface , 2016 .

[7]  M. Tan,et al.  Chloride ingress in cracked and uncracked SHCC under cyclic wetting-drying exposure , 2016 .

[8]  Deric J. Oehlers,et al.  Deterioration of bond–slip due to corrosion of steel reinforcement in reinforced concrete , 2016 .

[9]  Peter Cawley,et al.  Current deflection NDE for the inspection and monitoring of pipes , 2016 .

[10]  Hui Luo,et al.  Mechanical impedance-based technique for steel structural corrosion damage detection , 2016 .

[11]  Brian Norton,et al.  State-of-the-art review of cathodic protection for reinforced concrete structures , 2016 .

[12]  M. Ohtsu,et al.  Application of AE rate-process analysis to damaged concrete structures due to earthquake , 2016 .

[13]  Huai-liang Wang,et al.  Steel–concrete bond behaviour of self-compacting concrete with recycled aggregates , 2016 .

[14]  W. Jung,et al.  In-situ monitoring of pitting corrosion on vertically positioned 304 stainless steel by analyzing acoustic-emission energy parameter , 2016 .

[15]  Hongyan Ma,et al.  Defect detection and location in switch rails by acoustic emission and Lamb wave analysis: A feasibility study , 2016 .

[16]  Zhiyuan Li,et al.  Bidirectional electromigration of a corrosion inhibitor in chloride contaminated concrete , 2016 .

[17]  Gangbing Song,et al.  Corrosion detection of steel reinforced concrete using combined carbon fiber and fiber Bragg grating active thermal probe , 2016 .

[18]  Nicolas Morizet,et al.  Classification of acoustic emission signals using wavelets and Random Forests : Application to localized corrosion , 2016 .

[19]  Hui Chen,et al.  Bond behaviour between corroded steel bars and concrete under different strain rates , 2016 .

[20]  Murat Ates,et al.  A review on conducting polymer coatings for corrosion protection , 2016 .

[21]  K. Sakai,et al.  Detection of Inner Corrosion of Steel Construction Using Magnetic Resistance Sensor and Magnetic Spectroscopy Analysis , 2016, IEEE Transactions on Magnetics.

[22]  Kuo-Wei Liao,et al.  Investigation of chloride diffusion in cement mortar via statistical learning theory , 2016 .

[23]  Paul Ziehl,et al.  Assessing Corrosion Damage in Posttensioned Concrete Structures Using Acoustic Emission , 2016 .

[24]  Suresh Bhalla,et al.  Reinforcement corrosion assessment capability of surface bonded and embedded piezo sensors for reinforced concrete structures , 2015 .

[25]  Shweta Goyal,et al.  Acoustic emission-based mathematical procedure for quantification of rebar corrosion in reinforced concrete , 2015 .

[26]  Zongjin Li,et al.  Performance investigations of reinforced magnesium phosphate concrete beams under accelerated corrosion conditions by multi techniques , 2015 .

[27]  Hongyan Ma,et al.  Monitoring setting and hardening of concrete by active acoustic method: Effects of water-to-cement ratio and pozzolanic materials , 2015 .

[28]  P. Raja,et al.  NATURAL CORROSION INHIBITORS FOR STEEL REINFORCEMENT IN CONCRETE — A REVIEW , 2015 .

[29]  Zongjin Li,et al.  Processing method and property study for cement-based piezoelectric composites and sensors , 2015 .

[30]  Chao Liu,et al.  A new smart traffic monitoring method using embedded cement-based piezoelectric sensors , 2015 .

[31]  Shweta Goyal,et al.  Acoustic emission vis-à-vis electrochemical techniques for corrosion monitoring of reinforced concrete element , 2014 .

[32]  Masayasu Ohtsu,et al.  Damage estimation of concrete canal due to earthquake effects by acoustic emission method , 2014 .

[33]  Tomoki Shiotani,et al.  Advanced structural health monitoring of concrete structures with the aid of acoustic emission , 2014 .

[34]  Zongjin Li,et al.  Corrosion monitoring of reinforced concrete beam using embedded cement-based piezoelectric sensor , 2013 .

[35]  Masayasu Ohtsu,et al.  Corrosion mechanisms in reinforced concrete by acoustic emission , 2013 .

[36]  Greg E. Bridges,et al.  A wireless embedded passive sensor for monitoring the corrosion potential of reinforcing steel , 2013 .

[37]  Sun Wei,et al.  Durability of concrete exposed to sulfate attack under flexural loading and drying–wetting cycles , 2013 .

[38]  Zongjin Li,et al.  Signal-Based Acoustic Emission Monitoring on Mortar Using Cement-Based Piezoelectric Sensors , 2011 .

[39]  Mohammad Pour-Ghaz,et al.  Quantitative Interpretation of Half-Cell Potential Measurements in Concrete Structures , 2009 .

[40]  M. Ohtsu,et al.  Phenomenological Model of Corrosion Process in Reinforced Concrete Identified by Acoustic Emission , 2007 .

[41]  Robert E. Melchers,et al.  Recent progress in the modeling of corrosion of structural steel immersed in seawaters , 2006 .

[42]  Zongjin Li,et al.  Steel corrosion in magnesia–phosphate cement concrete beams , 2017 .