Water-Soluble Sand Core Made by Binder Jetting Printing with the Binder of Potassium Carbonate Solution

[1]  A. Hart,et al.  A rapid development workflow for binder inks for additive manufacturing with application to polymer and reactive binder ink formulation , 2022, Journal of Manufacturing Processes.

[2]  Z. Fan,et al.  3D printing of high-strength water-soluble salt cores via material extrusion , 2021, The International Journal of Advanced Manufacturing Technology.

[3]  Z. Chen,et al.  3D Printing of High-Strength Water-Soluble Salt Cores Via Layered Extrusion Forming , 2021 .

[4]  Z. Fan,et al.  Comparative study on performance and microstructure of composite water-soluble salt core material for manufacturing hollow zinc alloy castings , 2020 .

[5]  Christopher B. Williams,et al.  Characterizing Binder–Powder Interaction in Binder Jetting Additive Manufacturing Via Sessile Drop Goniometry , 2018, Journal of Manufacturing Science and Engineering.

[6]  Z. Fan,et al.  A water-soluble magnesium sulfate bonded sand core material for manufacturing hollow composite castings , 2018, Composite Structures.

[7]  L. Zaretskiy.  Hydrous Solid Silicates in New Foundry Binders , 2018, International Journal of Metalcasting.

[8]  Z. Fan,et al.  Fabrication and characterization of high-strength water-soluble composite salt core for zinc alloy die castings , 2018 .

[9]  Chunsheng Ye,et al.  3D printing of CaO-based ceramic core using nanozirconia suspension as a binder , 2017 .

[10]  Bao-ping Zhang,et al.  Study on the Composition and Properties of Salt Cores for Zinc Alloy Die Casting , 2017, International Journal of Metalcasting.

[11]  A. Kennedy,et al.  A water-soluble core material for manufacturing hollow composite sections , 2016 .

[12]  Z. Fan,et al.  Performance of water-soluble composite sulfate sand core for magnesium alloy castings , 2016 .

[13]  C. Körner,et al.  Core Viability Simulation for Salt Core Technology in High-Pressure Die Casting , 2013, International Journal of Metalcasting.

[14]  A. Koltygin,et al.  Development of a substitute for Z cast molding sand used on installations of 3D printing for obtaining aluminum, magnesium, and iron casting , 2012, Russian Journal of Non-Ferrous Metals.

[15]  K. Anzai,et al.  Strength of Salt Core Composed of Alkali Carbonate and Alkali Chloride Mixtures Made by Casting Technique , 2007 .

[16]  Yoji Marutani,et al.  Manufacturing sacrificial patterns for casting by salt powder lamination , 2004 .

[17]  G. Walker,et al.  Caking Processes in Granular NPK Fertilizer , 1998 .

[18]  Wang Bu-xuan.  A Review on Dynamic Wetting and Dynamic Contact Angle , 2003 .