Design of an Auxiliary Converter for the Diode Rectifier and the Analysis of the Circulating Current

In variable-speed drives systems, diode rectifiers and thyristor rectifiers are often used as the front-end circuit for AC-DC conversion. The advantages of the conventional rectifier are its simplicity and high reliability. The drawbacks include the harmonic current distortion and the lack of regeneration capability. In recent years, industries adopt the transistor-based active front-end (AFE) technologies to accomplish high power factor operation and re-generation capability. However, the cost of AFE is much higher than the conventional diode/thyristor front-end. Besides, the AFE is often less reliable than the diode/thyristor front-end under utility transients. In this paper, an IGBT-based auxiliary converter (AXC) system is proposed. The AXC operates as a shunt active filter to compensate the harmonic current of the rectifier when the load consumes power. When the dc load re-generates, the AXC system can channel the re-generation energy back into the utility system. The combination of the diode rectifier and the AXC can accomplish unity power factor operation and regeneration, but it also causes circulating current between the AXC and the rectifier, which leads to higher operational losses and higher noise level. The mechanism of the circulating current is analyzed in this paper, and solutions are also presented. Computer simulation and field test results are presented to validate the performance of the proposed AXC system.

[1]  Thomas G. Habetler,et al.  A space vector-based rectifier regulator for AC/DC/AC converters , 1993 .

[2]  Po-Tai Cheng,et al.  Experimental verification of dominant harmonic active filter (DHAF) for high power applications , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[3]  Mauricio Aredes,et al.  Analysis and Software Implementation of a Robust Synchronizing PLL Circuit Based on the pq Theory , 2006, IEEE Transactions on Industrial Electronics.

[4]  M.S. Adler,et al.  Power semiconductor switching devices—A comparison based on inductive switching , 1982, IEEE Transactions on Electron Devices.

[5]  Hirofumi Akagi,et al.  A novel control scheme of a parallel current-controlled PWM inverter , 1992 .

[6]  Bantval J. Baliga,et al.  Power semiconductor devices for variable-frequency drives , 1994, Proc. IEEE.

[7]  T. Suzuki.  DC power-supply system with inverting substations for traction systems using regenerative brakes , 1982 .

[8]  José R. Espinoza,et al.  PWM regenerative rectifiers: state of the art , 2005, IEEE Transactions on Industrial Electronics.

[9]  F. Blaabjerg,et al.  High Performance Current Controller for Selective Harmonic Compensation in Active Power Filters , 2007, IEEE Transactions on Power Electronics.

[10]  V. Blasko,et al.  A Novel Method for Selective Harmonic Elimination in Power Electronic Equipment , 2007, IEEE Transactions on Power Electronics.

[11]  G. Venkataramanan,et al.  Design Considerations for Reactive Elements and Control Parameters for Three Phase Boost Rectifiers , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[12]  V. Blasko.  Power conditions and control of a regenerative brake , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[13]  Keiji Wada,et al.  Design and Performance of a Transformerless Shunt Hybrid Filter Integrated Into a Three-Phase Diode Rectifier , 2007, IEEE Transactions on Power Electronics.

[14]  R. H. Wilkinson,et al.  Evaluation of converter topologies for improved power quality in DC traction substations , 1996, Proceedings of IEEE International Symposium on Industrial Electronics.

[15]  Dushan Boroyevich,et al.  Control of circulating current in two parallel three-phase boost rectifiers , 2002 .

[16]  M. Salo,et al.  Comparison of Voltage-Source and Current-Source Shunt Active Power Filters , 2005, IEEE Transactions on Power Electronics.

[17]  Johan Enslin,et al.  Inverting DC traction substation with active power filtering incorporated , 1995, Proceedings of PESC '95 - Power Electronics Specialist Conference.