A Homopolar HTSG Topology for Large Direct-Drive Wind Turbines

For offshore wind energy, there is a trend toward larger wind turbines. The increased mass of a power-takeoff system increases the installation cost of the turbine. Direct-drive superconducting generators have the potential to reduce the installation cost of wind turbines. For a successful entry to the offshore-wind-energy market, a high-temperature superconducting generator should be as reliable as conventional generators. It is proposed that a stationary superconducting direct-current-field winding may increase the reliability of the generator. An axial-flux homopolar generator topology is proposed to be used in low-speed high-torque applications. The topology is modified by using two superconducting field windings to obtain a bipolar flux-density distribution for higher power density. Different core types and dimensions were examined to find the most suitable design, and a conceptual design of a 6-MW 12-r/min generator is presented.

[1]  Ronald G. Harley,et al.  Present and future trends in wind turbine generator designs , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[2]  T. Morishita,et al.  Development of an Axial Flux Type PM Synchronous Motor With the Liquid Nitrogen Cooled HTS Armature Windings , 2007, IEEE Transactions on Applied Superconductivity.

[3]  B. Maples,et al.  Comparative Assessment of Direct Drive High Temperature Superconducting Generators in Multi-Megawatt Class Wind Turbines , 2010 .

[4]  Gregory Snitchler.  Progress on high temperature superconductor propulsion motors and direct drive wind generators , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[5]  J.W. Bray,et al.  Superconductors in Applications; Some Practical Aspects , 2009, IEEE Transactions on Applied Superconductivity.

[6]  M. Wilke,et al.  Design Challenges and Benefits of HTS Synchronous Machines , 2007, 2007 IEEE Power Engineering Society General Meeting.

[7]  Jacek F. Gieras.  Advancements in Electric Machines , 2008 .

[8]  Henk Polinder,et al.  Review of Generator Systems for Direct-Drive Wind Turbines , 2008 .

[9]  Peter Tavner,et al.  Reliability of wind turbine subassemblies , 2009 .

[10]  G. Klaus,et al.  Advances in the development of synchronous machines with high-temperature superconducting field winding at Siemens AG , 2006, 2006 IEEE Power Engineering Society General Meeting.

[11]  C. Lewis,et al.  A Direct Drive Wind Turbine HTS Generator , 2007, 2007 IEEE Power Engineering Society General Meeting.

[12]  Masato Murakami,et al.  High-temperature superconductor bulk magnets that can trap magnetic fields of over 17 tesla at 29 K , 2003, Nature.

[13]  C. Beduz,et al.  Performance Test of a 100 kW HTS Generator Operating at 67 K–77 K , 2009, IEEE Transactions on Applied Superconductivity.

[14]  H. Ohsaki,et al.  Design study of wind turbine generators using superconducting coils and bulks , 2009, 2009 International Conference on Clean Electrical Power.

[15]  H. Fujimoto,et al.  Mechanical and cryogenic design of a synchronous rotating machines with HTS pole-field magnets , 2006, 2006 IEEE Power Engineering Society General Meeting.

[16]  C. Træholt,et al.  Superconducting wind turbine generators , 2010 .

[17]  R. Schiferl,et al.  High Temperature Superconducting Synchronous Motors: Economic Issues for Industrial Applications , 2006, 2006 Record of Conference Papers - IEEE Industry Applications Society 53rd Annual Petroleum and Chemical Industry Conference.

[18]  Young-Sik Jo,et al.  Study on Homopolar Superconductivity Synchronous Motors for Ship Propulsion Applications , 2008, IEEE Transactions on Applied Superconductivity.

[19]  Henk Polinder,et al.  Ring-shaped transverse flux PM generator for large direct-drive wind turbines , 2009, 2009 International Conference on Power Electronics and Drive Systems (PEDS).

[20]  P. Tixador,et al.  Design of HTS Axial Flux Motor for Aircraft Propulsion , 2007, IEEE Transactions on Applied Superconductivity.

[21]  G. Snitchler,et al.  The status of HTS ship propulsion motor developments , 2006, 2006 IEEE Power Engineering Society General Meeting.

[22]  Z. Hong,et al.  The Next Generation of Superconducting Permanent Magnets: The Flux Pumping Method , 2009, IEEE Transactions on Applied Superconductivity.

[23]  N Maki,et al.  Design study of high-temperature superconducting generators for wind power systems , 2008 .

[24]  P. Masson,et al.  Scaling Up of HTS Motor Based on Trapped Flux and Flux Concentration for Large Aircraft Propulsion , 2007, IEEE Transactions on Applied Superconductivity.

[25]  Gregory L. Rhoads,et al.  Review of high power density superconducting generators: Present state and prospects for incorporating YBCO windings , 2005 .

[26]  Swarn S. Kalsi,et al.  Development status of rotating machines employing superconducting field windings , 2004, Proceedings of the IEEE.