Bioprinting a cell‐laden matrix for bone regeneration: A focused review

[1]  A. Zamanian,et al.  A critical review on three dimensional-printed chitosan hydrogels for development of tissue engineering , 2020 .

[2]  F. Ghorbani,et al.  3D printing of acellular scaffolds for bone defect regeneration: A review , 2020 .

[3]  A. Zamanian,et al.  Conductive electrospun polyurethane-polyaniline scaffolds coated with poly(vinyl alcohol)-GPTMS under oxygen plasma surface modification , 2020 .

[4]  Akhilesh K Gaharwar,et al.  Bioprinting 101: Design, Fabrication and Evaluation of Cell-laden 3D Bioprinted Scaffolds. , 2020, Tissue engineering. Part A.

[5]  Ishita Matai,et al.  Progress in 3D bioprinting technology for tissue/organ regenerative engineering. , 2020, Biomaterials.

[6]  Ioannis Angelopoulos,et al.  Engineering inkjet bioprinting processes toward translational therapies , 2020, Biotechnology and bioengineering.

[7]  Ibrahim T. Ozbolat,et al.  Synergistic interplay between human MSCs and HUVECs in 3D spheroids laden in collagen/fibrin hydrogels for bone tissue engineering. , 2019, Acta biomaterialia.

[8]  N. Suh,et al.  The Use of the Proximal Hamate as an Autograft for Proximal Pole Scaphoid Fractures: Clinical Outcomes and Biomechanical Implications. , 2019, Hand clinics.

[9]  Z. Jessop,et al.  Printability of pulp derived crystal, fibril and blend nanocellulose-alginate bioinks for extrusion 3D bioprinting , 2019, Biofabrication.

[10]  A. Arjunan,et al.  Extra low interstitial titanium based fully porous morphological bone scaffolds manufactured using selective laser melting. , 2019, Journal of the mechanical behavior of biomedical materials.

[11]  G Cidonio,et al.  The cell in the ink: Improving biofabrication by printing stem cells for skeletal regenerative medicine , 2019, Biomaterials.

[12]  K. Amighi,et al.  Investigation of the parameters used in fused deposition modeling of poly(lactic acid) to optimize 3D printing sessions. , 2019, International journal of pharmaceutics.

[13]  B. Bunnell,et al.  Development of Responsive Chitosan-Genipin Hydrogels for the Treatment of Wounds. , 2019, ACS applied bio materials.

[14]  A. Feinberg,et al.  Cryopreserved cell-laden alginate microgel bioink for 3D bioprinting of living tissues. , 2019, Materials today. Chemistry.

[15]  J. Chen,et al.  Continuous compression behaviors of selective laser melting Ti-6Al-4V alloy with cuboctahedron cellular structures. , 2019, Materials science & engineering. C, Materials for biological applications.

[16]  Changxue Xu,et al.  Biofabrication of 3D cell-encapsulated tubular constructs using dynamic optical projection stereolithography , 2019, Journal of Materials Science: Materials in Medicine.

[17]  N. Chen,et al.  Fabrication and properties of poly(vinyl alcohol)/β-tricalcium phosphate composite scaffolds via fused deposition modeling for bone tissue engineering , 2019, Composites Science and Technology.

[18]  Chuanzhen Huang,et al.  Development of a novel aqueous hydroxyapatite suspension for stereolithography applied to bone tissue engineering , 2019, Ceramics International.

[19]  S. Catros,et al.  Micropatterning of endothelial cells to create a capillary-like network with defined architecture by laser-assisted bioprinting , 2019, Journal of Materials Science: Materials in Medicine.

[20]  Ali Khademhosseini,et al.  Advancing Frontiers in Bone Bioprinting , 2019, Advanced healthcare materials.

[21]  Chibum Lee,et al.  3D printable hyaluronic acid-based hydrogel for its potential application as a bioink in tissue engineering , 2019, Biomaterials Research.

[22]  B. Erman,et al.  Nanocomposite Bioinks Based on Agarose and 2D Nanosilicates with Tunable Flow Properties and Bioactivity for 3D Bioprinting. , 2019, ACS applied bio materials.

[23]  Joan M Cabot,et al.  Three-Dimensional Printing of Abrasive, Hard, and Thermally Conductive Synthetic Microdiamond-Polymer Composite Using Low-Cost Fused Deposition Modeling Printer. , 2019, ACS applied materials & interfaces.

[24]  Y. Lv,et al.  Reconstructing Bone with Natural Bone Graft: A Review of In Vivo Studies in Bone Defect Animal Model , 2018, Nanomaterials.

[25]  Jingwen Wu,et al.  3D printing mesoporous bioactive glass/sodium alginate/gelatin sustained release scaffolds for bone repair , 2018, Journal of biomaterials applications.

[26]  Seong-Ho Choi,et al.  3D-printed polycaprolactone scaffold mixed with β-tricalcium phosphate as a bone regenerative material in rabbit calvarial defects. , 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

[27]  Sean M Bittner,et al.  Three-dimensional Printing of Multilayered Tissue Engineering Scaffolds. , 2018, Materials today.

[28]  Jae Young Lee,et al.  Three dimensional cell printing with sulfated alginate for improved bone morphogenetic protein-2 delivery and osteogenesis in bone tissue engineering. , 2018, Carbohydrate polymers.

[29]  Amit Bandyopadhyay,et al.  Starch-Hydroxyapatite Composite Bone Scaffold Fabrication Utilizing a Slurry Extrusion-Based Solid Freeform Fabricator. , 2018, Additive manufacturing.

[30]  M. Dargusch,et al.  Synthesis, microstructure, and mechanical behaviour of a unique porous PHBV scaffold manufactured using selective laser sintering. , 2018, Journal of the mechanical behavior of biomedical materials.

[31]  Pureum Kim,et al.  Chitosan-catechol: a writable bioink under serum culture media. , 2018, Biomaterials science.

[32]  Ali Khademhosseini,et al.  Bioinks for 3D bioprinting: an overview. , 2018, Biomaterials science.

[33]  F Kawecki,et al.  Self-assembled human osseous cell sheets as living biopapers for the laser-assisted bioprinting of human endothelial cells , 2018, Biofabrication.

[34]  M. Messori,et al.  3D printing processes for photocurable polymeric materials: technologies, materials, and future trends , 2018, Journal of applied biomaterials & functional materials.

[35]  Anthony Atala,et al.  3D bioprinted functional and contractile cardiac tissue constructs. , 2018, Acta biomaterialia.

[36]  Jessica Nulty,et al.  3D printed microchannel networks to direct vascularisation during endochondral bone repair. , 2018, Biomaterials.

[37]  Jianzhong Fu,et al.  3D Bioprinting of Low-Concentration Cell-Laden Gelatin Methacrylate (GelMA) Bioinks with a Two-Step Cross-linking Strategy. , 2018, ACS applied materials & interfaces.

[38]  S. Bryant,et al.  A Stereolithography-Based 3D Printed Hybrid Scaffold for In Situ Cartilage Defect Repair. , 2018, Macromolecular bioscience.

[39]  Xingchen Yang,et al.  Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering. , 2018, Materials science & engineering. C, Materials for biological applications.

[40]  S. Madihally,et al.  Bioprinted chitosan-gelatin thermosensitive hydrogels using an inexpensive 3D printer , 2017, Biofabrication.

[41]  F. Melchels,et al.  Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability , 2017, Biofabrication.

[42]  Liang Dong,et al.  3D- Printed Poly(ε-caprolactone) Scaffold Integrated with Cell-laden Chitosan Hydrogels for Bone Tissue Engineering , 2017, Scientific Reports.

[43]  Hansoo Park,et al.  Crosslinking method of hyaluronic-based hydrogel for biomedical applications , 2017, Journal of tissue engineering.

[44]  Thomas Schmitz-Rode,et al.  Three-Dimensional Printing and Angiogenesis: Tailored Agarose-Type I Collagen Blends Comprise Three-Dimensional Printability and Angiogenesis Potential for Tissue-Engineered Substitutes. , 2017, Tissue engineering. Part C, Methods.

[45]  Yong Huang,et al.  Inkjet Bioprinting of 3D Silk Fibroin Cellular Constructs Using Sacrificial Alginate. , 2017, ACS biomaterials science & engineering.

[46]  M. Gümüşderelioğlu,et al.  A bioprintable form of chitosan hydrogel for bone tissue engineering , 2017, Biofabrication.

[47]  Lawrence J Bonassar,et al.  Correlating rheological properties and printability of collagen bioinks: the effects of riboflavin photocrosslinking and pH , 2017, Biofabrication.

[48]  Seeram Ramakrishna,et al.  Three-dimensional bioprinting for bone tissue regeneration , 2017 .

[49]  Wouter J A Dhert,et al.  3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity , 2017, PloS one.

[50]  Ali Khademhosseini,et al.  Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks , 2017, Advanced healthcare materials.

[51]  F. Guillemot,et al.  In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications , 2017, Scientific Reports.

[52]  Ali Navaei,et al.  Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs , 2017, Advanced materials.

[53]  Saurabh Shivalkar,et al.  Solid Freeform Techniques Application in Bone Tissue Engineering for Scaffold Fabrication , 2017, Tissue Engineering and Regenerative Medicine.

[54]  M. Bikson,et al.  Higher-order power harmonics of pulsed electrical stimulation modulates corticospinal contribution of peripheral nerve stimulation , 2017, Scientific Reports.

[55]  T. Dekker,et al.  Efficacy of a Cellular Bone Allograft for Foot and Ankle Arthrodesis and Revision Nonunion Procedures , 2017, Foot & ankle international.

[56]  R. Jerez-Mesa,et al.  Influence of building orientation on the flexural strength of laminated object manufacturing specimens , 2017 .

[57]  M. Leu,et al.  3D bioprinting of stem cells and polymer/bioactive glass composite scaffolds for bone tissue engineering , 2017, International journal of bioprinting.

[58]  Kathy Qian Luo,et al.  High Shear Stresses under Exercise Condition Destroy Circulating Tumor Cells in a Microfluidic System , 2017, Scientific Reports.

[59]  Hyeongjin Lee,et al.  Strategy to Achieve Highly Porous/Biocompatible Macroscale Cell Blocks, Using a Collagen/Genipin-bioink and an Optimal 3D Printing Process. , 2016, ACS applied materials & interfaces.

[60]  Xiongfei Zheng,et al.  BMSCs-laden gelatin/sodium alginate/carboxymethyl chitosan hydrogel for 3D bioprinting , 2016 .

[61]  Sylvain Catros,et al.  Patterning of Endothelial Cells and Mesenchymal Stem Cells by Laser-Assisted Bioprinting to Study Cell Migration , 2016, BioMed research international.

[62]  D. Kelly,et al.  A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage , 2016, Biofabrication.

[63]  Huifang Zhou,et al.  Recent advances in bioprinting techniques: approaches, applications and future prospects , 2016, Journal of Translational Medicine.

[64]  R. Meneghello,et al.  Powder-based 3D printing for bone tissue engineering. , 2016, Biotechnology advances.

[65]  H. Yun,et al.  A simultaneous 3D printing process for the fabrication of bioceramic and cell-laden hydrogel core/shell scaffolds with potential application in bone tissue regeneration. , 2016, Journal of materials chemistry. B.

[66]  Dong-Woo Cho,et al.  One-step fabrication of an organ-on-a-chip with spatial heterogeneity using a 3D bioprinting technology. , 2016, Lab on a chip.

[67]  Gordon G Wallace,et al.  Functional 3D Neural Mini‐Tissues from Printed Gel‐Based Bioink and Human Neural Stem Cells , 2016, Advanced healthcare materials.

[68]  Hyoun‐Ee Kim,et al.  Long-lasting and bioactive hyaluronic acid-hydroxyapatite composite hydrogels for injectable dermal fillers: Physical properties and in vivo durability , 2016, Journal of biomaterials applications.

[69]  T. Witham,et al.  Growth factor-eluting technologies for bone tissue engineering , 2016, Drug Delivery and Translational Research.

[70]  James J. Yoo,et al.  A 3D bioprinting system to produce human-scale tissue constructs with structural integrity , 2016, Nature Biotechnology.

[71]  Hyoun‐Ee Kim,et al.  Strong and Biostable Hyaluronic Acid-Calcium Phosphate Nanocomposite Hydrogel via in Situ Precipitation Process. , 2016, Biomacromolecules.

[72]  T. Scheibel,et al.  Strategies and Molecular Design Criteria for 3D Printable Hydrogels. , 2016, Chemical reviews.

[73]  Horst Fischer,et al.  Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity , 2016, Advanced healthcare materials.

[74]  G. Fanaro,et al.  Collagen supplementation as a complementary therapy for the prevention and treatment of osteoporosis and osteoarthritis: a systematic review , 2016 .

[75]  Shengmin Zhang,et al.  Microsphere-based selective laser sintering for building macroporous bone scaffolds with controlled microstructure and excellent biocompatibility. , 2015, Colloids and surfaces. B, Biointerfaces.

[76]  Christine Vauthier,et al.  Gelation and micellization behaviors of pluronic(®) F127 hydrogel containing poly(isobutylcyanoacrylate) nanoparticles specifically designed for mucosal application. , 2015, Colloids and surfaces. B, Biointerfaces.

[77]  Alan Faulkner-Jones,et al.  Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D , 2015, Biofabrication.

[78]  R. Neubert,et al.  Evaluation of in-vitro degradation rate of hyaluronic acid-based hydrogel cross-linked with 1, 4-butanediol diglycidyl ether (BDDE) using RP-HPLC and UV–Vis spectroscopy , 2015 .

[79]  Xiaofeng Cui,et al.  Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging. , 2015, Biotechnology journal.

[80]  Xiaofeng Cui,et al.  Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA , 2015, Biotechnology Letters.

[81]  Cato T Laurencin,et al.  Biomaterials for Bone Regenerative Engineering , 2015, Advanced healthcare materials.

[82]  W. Tian,et al.  Combination of aligned PLGA/Gelatin electrospun sheets, native dental pulp extracellular matrix and treated dentin matrix as substrates for tooth root regeneration. , 2015, Biomaterials.

[83]  Marisa Masumi Beppu,et al.  Development of silk fibroin/nanohydroxyapatite composite hydrogels for bone tissue engineering , 2015 .

[84]  Emily C. Beck,et al.  Decellularized Cartilage May Be a Chondroinductive Material for Osteochondral Tissue Engineering , 2015, PloS one.

[85]  Jianzhong Fu,et al.  Freeform inkjet printing of cellular structures with bifurcations , 2015, Biotechnology and bioengineering.

[86]  H. M. Jamil,et al.  TGF-β/BMP signaling and other molecular events: regulation of osteoblastogenesis and bone formation , 2015, Bone Research.

[87]  P. Gatenholm,et al.  3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications. , 2015, Biomacromolecules.

[88]  B. Lee,et al.  Printing cell-laden gelatin constructs by free-form fabrication and enzymatic protein crosslinking , 2015, Biomedical microdevices.

[89]  Todd C. McDevitt,et al.  Gelatin methacrylate microspheres for controlled growth factor release. , 2015, Acta biomaterialia.

[90]  FischerHorst,et al.  The stiffness and structure of three-dimensional printed hydrogels direct the differentiation of mesenchymal stromal cells toward adipogenic and osteogenic lineages. , 2015 .

[91]  F. Marzatico,et al.  Anti-aging and filling efficacy of six types hyaluronic acid based dermo-cosmetic treatment: double blind, randomized clinical trial of efficacy and safety , 2014, Journal of cosmetic dermatology.

[92]  Dong-Woo Cho,et al.  Efficacy of rhBMP-2 loaded PCL/PLGA/β-TCP guided bone regeneration membrane fabricated by 3D printing technology for reconstruction of calvaria defects in rabbit , 2014, Biomedical materials.

[93]  Jianhua Zhang,et al.  3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia. , 2014, Journal of materials chemistry. B.

[94]  Guifang Gao,et al.  Bioactive nanoparticles stimulate bone tissue formation in bioprinted three-dimensional scaffold and human mesenchymal stem cells. , 2014, Biotechnology journal.

[95]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[96]  L. Duong,et al.  PDGF-BB secreted by preosteoclasts induces CD31hiEmcnhi vessel subtype in coupling osteogenesis , 2014, Nature Medicine.

[97]  G. Livshits,et al.  Osteocyte control of bone remodeling: is sclerostin a key molecular coordinator of the balanced bone resorption–formation cycles? , 2014, Osteoporosis International.

[98]  Deok‐Ho Kim,et al.  Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink , 2014, Nature Communications.

[99]  Hyun-Ju Koh,et al.  Investigation of the Degradation-Retarding Effect Caused by the Low Swelling Capacity of a Novel Hyaluronic Acid Filler Developed by Solid-Phase Crosslinking Technology , 2014, Annals of dermatology.

[100]  Dong-Woo Cho,et al.  A comparative study on collagen type I and hyaluronic acid dependent cell behavior for osteochondral tissue bioprinting , 2014, Biofabrication.

[101]  Nupura S. Bhise,et al.  Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels , 2014, Biofabrication.

[102]  L. Gioglio,et al.  Natural and Synthetic Biodegradable Polymers: Different Scaffolds for Cell Expansion and Tissue Formation , 2014 .

[103]  Harrie Weinans,et al.  Sustained Release of BMP-2 in Bioprinted Alginate for Osteogenicity in Mice and Rats , 2013, PloS one.

[104]  Jerry C. Hu,et al.  Self-organization and the self-assembling process in tissue engineering. , 2013, Annual review of biomedical engineering.

[105]  Shih-Han Hung,et al.  Larynx decellularization: combining freeze-drying and sonication as an effective method. , 2013, Journal of voice : official journal of the Voice Foundation.

[106]  P. R. van Weeren,et al.  Gelatin-methacrylamide hydrogels as potential biomaterials for fabrication of tissue-engineered cartilage constructs. , 2013, Macromolecular bioscience.

[107]  Wanjun Chen,et al.  TGF-beta1 on osteoimmunology and the bone component cells , 2013, Cell & Bioscience.

[108]  R. Markwald,et al.  Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes , 2012, Biotechnology and bioengineering.

[109]  Gianluca Ciardelli,et al.  Collagen for bone tissue regeneration. , 2012, Acta biomaterialia.

[110]  Xiaofeng Cui,et al.  Thermal inkjet printing in tissue engineering and regenerative medicine. , 2012, Recent patents on drug delivery & formulation.

[111]  Alessandro Giacomello,et al.  Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells. , 2012, Biomaterials.

[112]  W. Hennink,et al.  Organ printing: the future of bone regeneration? , 2011, Trends in biotechnology.

[113]  Giovanni Vozzi,et al.  Substrate stiffness influences high resolution printing of living cells with an ink-jet system. , 2011, Journal of bioscience and bioengineering.

[114]  J.V.L. da Silva,et al.  Scalable robotic biofabrication of tissue spheroids , 2011, Biofabrication.

[115]  M. Martinez-frias,et al.  A clinical and experimental overview of sirenomelia: insight into the mechanisms of congenital limb malformations , 2011, Disease Models & Mechanisms.

[116]  David T Corr,et al.  The maintenance of pluripotency following laser direct-write of mouse embryonic stem cells. , 2011, Biomaterials.

[117]  F. Guillemot,et al.  Laser assisted bioprinting of engineered tissue with high cell density and microscale organization. , 2010, Biomaterials.

[118]  Nan Ma,et al.  Laser printing of skin cells and human stem cells. , 2010, Tissue engineering. Part C, Methods.

[119]  T. Boland,et al.  Cell damage evaluation of thermal inkjet printed Chinese hamster ovary cells , 2010, Biotechnology and bioengineering.

[120]  Aldo R. Boccaccini,et al.  Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering , 2010, Materials.

[121]  Karoly Jakab,et al.  Tissue engineering by self-assembly and bio-printing of living cells , 2010, Biofabrication.

[122]  E. Toyserkani,et al.  Solid freeform fabrication and characterization of porous calcium polyphosphate structures for tissue engineering purposes. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

[123]  S. Yoo,et al.  On‐demand three‐dimensional freeform fabrication of multi‐layered hydrogel scaffold with fluidic channels , 2010, Biotechnology and bioengineering.

[124]  Eric D. Miller,et al.  Inkjet-based biopatterning of bone morphogenetic protein-2 to spatially control calvarial bone formation. , 2010, Tissue engineering. Part A.

[125]  Katsuhiko Ariga,et al.  Advances in Biomimetic and Nanostructured Biohybrid Materials , 2010, Advanced materials.

[126]  A Tirella,et al.  A phase diagram for microfabrication of geometrically controlled hydrogel scaffolds , 2009, Biofabrication.

[127]  Kristi S Anseth,et al.  Photoinitiated polymerization of PEG-diacrylate with lithium phenyl-2,4,6-trimethylbenzoylphosphinate: polymerization rate and cytocompatibility. , 2009, Biomaterials.

[128]  Z. Xiong,et al.  Skeletal repair in rabbits using a novel biomimetic composite based on adipose‐derived stem cells encapsulated in collagen I gel with PLGA‐β‐TCP scaffold , 2009, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[129]  Craig B. Arnold,et al.  Laser direct write printing of sensitive and robust light emitting organic molecules , 2009 .

[130]  Karl R Edminster,et al.  Multi-layered culture of human skin fibroblasts and keratinocytes through three-dimensional freeform fabrication. , 2009, Biomaterials.

[131]  Brian Derby,et al.  Bioprinting: Inkjet printing proteins and hybrid cell-containing materials and structures , 2008 .

[132]  D. Yu,et al.  Bone regeneration of critical calvarial defect in goat model by PLGA/TCP/rhBMP-2 scaffolds prepared by low-temperature rapid-prototyping technology. , 2008, International journal of oral and maxillofacial surgery.

[133]  S. Bryant,et al.  Cell encapsulation in biodegradable hydrogels for tissue engineering applications. , 2008, Tissue engineering. Part B, Reviews.

[134]  W. Dhert,et al.  Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. , 2008, Tissue engineering. Part A.

[135]  P. Calvert.  Printing Cells , 2007, Science.

[136]  Paolo Giannoni,et al.  A tissue engineering approach to bone repair in large animal models and in clinical practice. , 2007, Biomaterials.

[137]  K. Anseth,et al.  Chondrogenic differentiation potential of human mesenchymal stem cells photoencapsulated within poly(ethylene glycol)-arginine-glycine-aspartic acid-serine thiol-methacrylate mixed-mode networks. , 2007, Tissue engineering.

[138]  Ryan B. Wicker,et al.  Stereolithography of Three-Dimensional Bioactive Poly(Ethylene Glycol) Constructs with Encapsulated Cells , 2006, Annals of Biomedical Engineering.

[139]  Béla Hopp,et al.  Study on metal microparticle content of the material transferred with Absorbing Film Assisted Laser Induced Forward Transfer when using silver absorbing layer , 2006 .

[140]  Eric D. Miller,et al.  Dose-dependent cell growth in response to concentration modulated patterns of FGF-2 printed on fibrin. , 2006, Biomaterials.

[141]  Eric D. Miller,et al.  Engineered spatial patterns of FGF-2 immobilized on fibrin direct cell organization. , 2005, Biomaterials.

[142]  S. Hollister.  Porous scaffold design for tissue engineering , 2005, Nature materials.

[143]  David A Tirrell,et al.  Cell-binding domain context affects cell behavior on engineered proteins. , 2005, Biomacromolecules.

[144]  Stuart K Williams,et al.  Three-dimensional bioassembly tool for generating viable tissue-engineered constructs. , 2004, Tissue engineering.

[145]  P. Janmey,et al.  Nonlinear elasticity in biological gels , 2004, Nature.

[146]  D. Weitz,et al.  Elastic Behavior of Cross-Linked and Bundled Actin Networks , 2004, Science.

[147]  Vladimir Mironov,et al.  Organ printing: computer-aided jet-based 3D tissue engineering. , 2003, Trends in biotechnology.

[148]  Ryoichi Matsuda,et al.  Growth Factor Array Fabrication Using a Color Ink Jet Printer , 2003, Zoological science.

[149]  L. Griffith,et al.  Tissue Engineering--Current Challenges and Expanding Opportunities , 2002, Science.

[150]  You Han Bae,et al.  Thermosensitive sol-gel reversible hydrogels. , 2002, Advanced drug delivery reviews.

[151]  R. A. McGill,et al.  The deposition, structure, pattern deposition, and activity of biomaterial thin-films by matrix-assisted pulsed-laser evaporation (MAPLE) and MAPLE direct write , 2001 .

[152]  S. Goodison,et al.  CD44 cell adhesion molecules. , 1999, Molecular pathology : MP.

[153]  Nicholas J. Mankovich,et al.  The display of three-dimensional anatomy with stereolithographic models , 1990, Journal of Digital Imaging.

[154]  A. Zamanian,et al.  A bioinspired 3D shape olibanum‐collagen‐gelatin scaffolds with tunable porous microstructure for efficient neural tissue regeneration , 2019, Biotechnology progress.

[155]  Satnam Singh,et al.  In situ Bioprinting - Bioprinting from Benchside to Bedside? , 2019, Acta biomaterialia.

[156]  Z. Jessop,et al.  3D bioprinting cartilage , 2018 .

[157]  D. Cho,et al.  Three-Dimensional Printing of Tissue/Organ Analogues Containing Living Cells , 2016, Annals of Biomedical Engineering.

[158]  A. Zamanian,et al.  Physicochemical properties and bioactivity of freeze-cast chitosan nanocomposite scaffolds reinforced with bioactive glass. , 2016, Materials science & engineering. C, Materials for biological applications.

[159]  Ibrahim T. Ozbolat,et al.  Current advances and future perspectives in extrusion-based bioprinting. , 2016, Biomaterials.

[160]  Dong-Woo Cho,et al.  Ornamenting 3D printed scaffolds with cell-laid extracellular matrix for bone tissue regeneration. , 2015, Biomaterials.

[161]  Dong-Woo Cho,et al.  Bioprintable, cell-laden silk fibroin-gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs. , 2015, Acta biomaterialia.

[162]  D. Jupiter,et al.  Bone graft substitute: allograft and xenograft. , 2015, Clinics in podiatric medicine and surgery.

[163]  James J. Yoo,et al.  Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology. , 2013, Biomaterials.

[164]  Birgit Glasmacher,et al.  Laser printing of stem cells for biofabrication of scaffold-free autologous grafts. , 2011, Tissue engineering. Part C, Methods.

[165]  Fergal J O'Brien,et al.  The effect of mean pore size on cell attachment, proliferation and migration in collagen-glycosaminoglycan scaffolds for bone tissue engineering. , 2010, Biomaterials.

[166]  Wim E Hennink,et al.  The effect of photopolymerization on stem cells embedded in hydrogels. , 2009, Biomaterials.

[167]  G. Carmeliet,et al.  Vascular and Nonvascular Roles of VEGF in Bone Development , 2008 .

[168]  Makoto Nakamura,et al.  Ink Jet Three-Dimensional Digital Fabrication for Biological Tissue Manufacturing: Analysis of Alginate Microgel Beads Produced by Ink Jet Droplets for Three Dimensional Tissue Fabrication , 2008 .

[169]  T. Boland,et al.  Inkjet printing of viable mammalian cells. , 2005, Biomaterials.

[170]  Ranieri Cancedda,et al.  Bone Marrow Stromal Cells (BMSCs) in Bone Engineering: Limitations and Recent Advances , 2004, Annals of Biomedical Engineering.

[171]  C. van Nostrum,et al.  Novel crosslinking methods to design hydrogels. , 2002, Advanced drug delivery reviews.

[172]  C Selden,et al.  Human hepatocyte cell lines proliferating as cohesive spheroid colonies in alginate markedly upregulate both synthetic and detoxificatory liver function. , 2001, Journal of hepatology.

[173]  U. Rapp,et al.  Growth factor regulation of cell cycle progression and cell fate determination. , 1995, Current topics in microbiology and immunology.