Hybrid input shaping to suppress residual vibration of flexible systems

This paper presents a hybrid input shaping method to eliminate residual vibration of multi-mode flexible systems. This method, initially designed for one degree of systems, is modified to apply on linear and nonlinear multi-mode systems. In this method, firstly the flexible system is uncoupled using modal analysis method, and then the parameters of the decoupled system are used to shape the command template signal. A ramp plus ramped cycloid plus ramped versine is proposed as the command template signal to be preshaped. The template function is preshaped to yield zero residual vibration for point to point motion and then the resulting trajectory is convolved with a sequence of two impulses to obtain a twice shaped input. The proposed method is applied to eliminate residual vibration of a linear multimass and flexible joint manipulator types of systems. Simulation results show that the oscillations are considerably decreased with a high degree of robustness in the presence of system parameters uncertainty.

[1]  D. M. Aspinwall.  Acceleration Profiles for Minimizing Residual Response , 1979 .

[2]  Azdiana Md. Yusop.  Input shaping for vibration-free positioning of flexible systems , 2006 .

[3]  S. S. Gürleyük,et al.  Robust Three-impulse Sequence Input Shaper Design , 2007 .

[4]  Jason Lawrence,et al.  Command Shaping for Nonlinear Crane Dynamics , 2010 .

[5]  Rifat Hacioglu,et al.  Three-step input shaper for damping tubular step motor vibrations , 2007 .

[6]  Sadettin Kapucu,et al.  Suppression of residual vibration of a translating–swinging load by a flexible manipulator , 2008 .

[7]  Craig F. Cutforth,et al.  Adaptive input shaping for maneuvering flexible structures , 2004, Autom..

[8]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[9]  Pyung-Hun Chang,et al.  Vibration Control of Telescopic Handler using Time Delay Control and Commandless Input Shaping Technique , 2001 .

[10]  Sadettin Kapucu,et al.  Residual swing/vibration reduction using a hybrid input shaping method , 2001 .

[11]  Sadettin Kapucu,et al.  On preshaped reference inputs to reduce swing of suspended objects transported with robot manipulators , 2000 .

[12]  Suhada Jayasuriya,et al.  Robust Adaptive Control of Residual Vibration in Point-to-Point Motion of Flexible Bodies , 2007 .

[13]  Edwin Hou,et al.  Optimal Input Shaper Design For High-Speed Robotic Workcells , 2003 .

[14]  M N Sahinkaya.  Exponential input shaping for vibration free positioning of lightly damped multi-mode systems , 2004 .

[15]  Warren P. Seering,et al.  Experimental Evaluation of Shaped Inputs to Reduce Vibration for a Cartesian Robot , 1990 .

[16]  Ali H. Nayfeh,et al.  Delayed Position-Feedback Controller for the Reduction of Payload Pendulations of Rotary Cranes , 2001 .

[17]  Ali H. Nayfeh,et al.  Sway Reduction on Quay-side Container Cranes Using Delayed Feedback Controller: Simulations and Experiments , 2005 .

[18]  Michael R. Hatch,et al.  Vibration Simulation Using MATLAB and ANSYS , 2000 .

[19]  Wayne J. Book,et al.  Implementing Modified Command Filtering to Eliminate Multiple Modes of Vibration , 1993, 1993 American Control Conference.

[20]  Hyung-Soon Park,et al.  Time-varying input shaping technique applied to vibration reduction of an industrial robot , 1999, IROS.

[21]  Pyung Hun Chang,et al.  Time-varying input shaping technique applied to vibration reduction of an industrial robot , 1999, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289).

[22]  Neil C. Singer,et al.  Residual Vibration Reduction in Computer controlled Machines , 1989 .

[23]  Paolo Pennacchi,et al.  Pre-shaping motion input for a rotating flexible link , 2001 .

[24]  Aurelio Piazzi,et al.  Minimum-time system-inversion-based motion planning for residual vibration reduction , 2000 .