A study on thermal performance of a pump-assisted loop heat pipe with ammonia as working fluid

[1]  Raphaël Mari,et al.  Experimental study of a Capillary Pumped Loop assisted with a mechanical pump placed at the evaporator inlet , 2020, Applied Thermal Engineering.

[2]  D. Wen,et al.  Visualization study on the heat and mass transfer in the evaporator-compensation chamber of a loop heat pipe , 2020, Applied Thermal Engineering.

[3]  Nandy Putra,et al.  Experimental investigation of the operating characteristics of a hybrid loop heat pipe using pump assistance , 2018 .

[4]  Y. Maydanik,et al.  Experimental study of an ammonia loop heat pipe with a flat disk-shaped evaporator using a bimetal wall , 2017 .

[5]  Zhichun Liu,et al.  Startup characteristics of pump-assisted capillary phase change loop , 2017 .

[6]  L. Wei,et al.  Experimental study of an ammonia loop heat pipe with a flat plate evaporator , 2016 .

[7]  Zhichun Liu,et al.  Effect of liquid charging process on the operational characteristics of pump-assisted capillary phase change loop , 2015 .

[8]  Songgang Qiu,et al.  Three-dimensional simulation of high temperature latent heat thermal energy storage system assisted by finned heat pipes , 2015 .

[9]  W. Lin,et al.  Investigating the effect of powder-mixing parameter in biporous wick manufacturing on enhancement of loop heat pipe performance , 2015 .

[10]  Chao Yuan,et al.  Multi-objective hydraulic optimization and analysis in a minipump , 2015 .

[11]  Svetlana I. Yushakova,et al.  Effect of external factors on the operating characteristics of a copper–water loop heat pipe , 2015 .

[12]  Zhichun Liu,et al.  Experimental investigation of pump-assisted capillary phase change loop , 2014 .

[13]  M. A. Chernysheva,et al.  Review: Loop heat pipes with flat evaporators , 2014 .

[14]  Daming Wang,et al.  A loop-heat-pipe heat sink with parallel condensers for high-power integrated LED chips , 2013 .

[15]  Wei Liu,et al.  Experimental investigation of loop heat pipe with flat evaporator using biporous wick , 2012 .

[16]  Chanwoo Park,et al.  Experimental analysis of pump-assisted and capillary-driven dual-evaporators two-phase cooling loop , 2012 .

[17]  Wei Liu,et al.  Operational characteristics of two biporous wicks used in loop heat pipe with flat evaporator , 2012 .

[18]  Jiepeng Huo,et al.  Experimental investigation on temperature oscillation in a miniature loop heat pipe with flat evaporator , 2012 .

[19]  Chanwoo Park,et al.  Effect of Operational Conditions on Cooling Performance of Pump-Assisted and Capillary-Driven Two-Phase Loop , 2011 .

[20]  P. Dutta,et al.  Theoretical and Experimental Studies on an Ammonia-Based Loop Heat Pipe With a Flat Evaporator , 2010, IEEE Transactions on Components and Packaging Technologies.

[21]  Daming Wang,et al.  Experimental studies on a high performance compact loop heat pipe with a square flat evaporator , 2010 .

[22]  V. G. Pastukhov,et al.  Active coolers based on copper–water LHPs for desktop PC , 2009 .

[23]  Yury F. Maydanik,et al.  Development and tests of ammonia Miniature Loop Heat Pipes with cylindrical evaporators , 2009 .

[24]  Chanwoo Park,et al.  Performance Evaluation of a Pump-Assisted, Capillary Two-Phase Cooling Loop , 2009 .

[25]  P. Stephan,et al.  A Concept for a Miniature, Mechanically Pumped Two-Phase Cooling Loop , 2008 .

[26]  Triem T. Hoang,et al.  Hybrid Two-Phase Mechanical / Capillary Pumped Loop for High-Capacity Heat Transport , 2007 .

[27]  Aparna Vallury,et al.  Advanced hybrid cooling loop technology for high performance thermal management , 2006 .

[28]  Yu.F. Maydanik,et al.  Loop heat pipes , 2005 .

[29]  Jentung Ku,et al.  Thermal Operational Characteristics of a Small-Loop Heat Pipe , 2003 .

[30]  Mark T. North,et al.  High heat flux loop heat pipes , 1997 .

[31]  Jamal Seyed-Yagoobi,et al.  Experimental investigation of an ion-drag pump-assisted capillary loop , 1993 .