Determining oxidative stability of battery electrolytes: validity of common electrochemical stability window (ESW) data and alternative strategies.

Increasing the operation voltage of electrochemical energy storage devices is a viable measure to realize higher specific energies and energy densities. A sufficient oxidative stability of electrolytes is the predominant requirement for successful high voltage applicability. The common method to investigate oxidative stability of LIB electrolytes is related to determination of the electrochemical stability window (ESW), on e.g. Pt or LiMn2O4 electrodes. However, the transferability of the obtained results to practical systems is questionable for several reasons. In this work, we evaluated the validity of the potentiodynamic based ESW method by comparing the obtained data with the results of galvanostatic based techniques, applied on commercial positive electrodes. We demonstrated that the oxidative stabilities, determined by the two techniques, are in good accordance with each other. However, the investigation of electrolytes being incompatible to Li metal, renders conventional ESW measurements useless when metallic Li is used as counter - and reference electrode in the ESW setup. For this reason, we introduced an alternative setup based on Li4Ti5O12 full cells. On the example of a butyronitrile-based electrolyte, we finally demonstrated that this electrolyte is not only reductively but also oxidatively less stable than common LiPF6/organic carbonate based electrolytes.

[1]  Wangda Li,et al.  High-voltage positive electrode materials for lithium-ion batteries. , 2017, Chemical Society reviews.

[2]  M. Winter,et al.  Synergistic Effect of Blended Components in Nonaqueous Electrolytes for Lithium Ion Batteries , 2017, Topics in Current Chemistry.

[3]  M. Winter,et al.  Magnesium-based additives for the cathode slurry to enable high voltage application of lithium-ion batteries , 2017 .

[4]  M. Winter,et al.  Changing Established Belief on Capacity Fade Mechanisms: Thorough Investigation of LiNi1/3Co1/3Mn1/3O2 (NCM111) under High Voltage Conditions , 2017 .

[5]  A. Balducci,et al.  The use of binary mixtures of 1-butyl-1-methylpyrrolidinium bis{(trifluoromethyl)sulfonyl}imide and aliphatic nitrile solvents as electrolyte for supercapacitors , 2016 .

[6]  M. Winter,et al.  Impact of Selected LiPF6 Hydrolysis Products on the High Voltage Stability of Lithium-Ion Battery Cells. , 2016, ACS applied materials & interfaces.

[7]  M. Winter,et al.  Best Practice: Performance and Cost Evaluation of Lithium Ion Battery Active Materials with Special Emphasis on Energy Efficiency , 2016 .

[8]  M. Winter,et al.  Counterintuitive Role of Magnesium Salts as Effective Electrolyte Additives for High Voltage Lithium‐Ion Batteries , 2016 .

[9]  H. Hahn,et al.  The truth about the 1st cycle Coulombic efficiency of LiNi1/3Co1/3Mn1/3O2 (NCM) cathodes. , 2016, Physical chemistry chemical physics : PCCP.

[10]  M. Winter,et al.  Learning from Overpotentials in Lithium Ion Batteries: A Case Study on the LiNi1/3Co1/3Mn1/3O2 (NCM) Cathode , 2016 .

[11]  Min-Joon Lee,et al.  Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries. , 2015, Angewandte Chemie.

[12]  M. Winter,et al.  Novel Fluorinated Solvents and Additives for Lithium-Ion Batteries , 2015 .

[13]  H. Gasteiger,et al.  Review—Electromobility: Batteries or Fuel Cells? , 2015 .

[14]  M. Winter,et al.  Electrolytes for lithium and lithium ion batteries: From synthesis of novel lithium borates and ionic liquids to development of novel measurement methods , 2014 .

[15]  M. Winter,et al.  Investigations on novel electrolytes, solvents and SEI additives for use in lithium-ion batteries: Systematic electrochemical characterization and detailed analysis by spectroscopic methods , 2014 .

[16]  M. Winter,et al.  Syntheses of novel delocalized cations and fluorinated anions, new fluorinated solvents and additives for lithium ion batteries , 2014 .

[17]  Kevin G. Gallagher,et al.  Quantifying the promise of lithium–air batteries for electric vehicles , 2014 .

[18]  M. Winter,et al.  Vinyl sulfones as SEI-forming additives in propylene carbonate based electrolytes for lithium-ion batteries , 2014 .

[19]  John B Goodenough,et al.  The Li-ion rechargeable battery: a perspective. , 2013, Journal of the American Chemical Society.

[20]  M. Winter,et al.  Fluoroethylene Carbonate as an Additive for γ-Butyrolactone Based Electrolytes , 2013 .

[21]  D. Mohanty,et al.  Microstructural investigation of LixNi1/3Mn1/3Co1/3O2 (x ≤ 1) and its aged products via magnetic and diffraction study , 2012 .

[22]  Martin Winter,et al.  Influence of graphite surface modifications on the ratio of basal plane to “non-basal plane” surface area and on the anode performance in lithium ion batteries , 2012 .

[23]  P. He,et al.  Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries , 2012 .

[24]  M. Winter,et al.  High flash point electrolyte for use in lithium-ion batteries , 2011 .

[25]  Kang Xu,et al.  Interfacing electrolytes with electrodes in Li ion batteries , 2011 .

[26]  R. Yazami,et al.  Electron Diffraction Studies of LiNi1 / 3Mn1 / 3Co1 / 3O2 After Charge–Discharge Cycling , 2010 .

[27]  Linda F. Nazar,et al.  Positive Electrode Materials for Li-Ion and Li-Batteries† , 2010 .

[28]  Martin Winter,et al.  The Solid Electrolyte Interphase – The Most Important and the Least Understood Solid Electrolyte in Rechargeable Li Batteries , 2009 .

[29]  K. Amine,et al.  Sulfone-based electrolytes for high-voltage Li-ion batteries ☆ , 2009 .

[30]  Y. Abu-Lebdeh,et al.  New electrolytes based on glutaronitrile for high energy/power Li-ion batteries , 2009 .

[31]  Y. Abu-Lebdeh,et al.  High-Voltage Electrolytes Based on Adiponitrile for Li-Ion Batteries , 2009 .

[32]  K. Xu.  Tailoring Electrolyte Composition for LiBOB , 2008 .

[33]  K. Abe,et al.  Functional Electrolytes Triple-Bonded Compound as an Additive for Negative Electrode , 2007 .

[34]  Petr Novák,et al.  CO2 Gas Evolution on Cathode Materials for Lithium-Ion Batteries , 2007 .

[35]  Kang Xu,et al.  Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. , 2004, Chemical reviews.

[36]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[37]  J. P. Olivier,et al.  Determination of the absolute and relative extents of basal plane surface area and “non-basal plane surface” area of graphites and their impact on anode performance in lithium ion batteries , 2001 .

[38]  J. Besenhard,et al.  Negative electrodes in rechargeable lithium ion batteries — Influence of graphite surface modification on the formation of the solid electrolyte interphase , 2000 .

[39]  Kang Xu,et al.  Toward Reliable Values of Electrochemical Stability Limits for Electrolytes , 1999 .

[40]  P. Novák,et al.  FTIR and DEMS investigations on the electroreduction of chloroethylene carbonate-based electrolyte solutions for lithium-ion cells , 1999 .

[41]  Martin Winter,et al.  Insertion reactions in advanced electrochemical energy storage , 1998 .

[42]  M. Ondrechen,et al.  The Intrinsic Anodic Stability of Several Anions Comprising Solvent‐Free Ionic Liquids , 1996 .

[43]  Masayuki Morita,et al.  Electric double layer capacitors with new gel electrolytes , 1995 .

[44]  Makoto Ue,et al.  Electrochemical Properties of Organic Liquid Electrolytes Based on Quaternary Onium Salts for Electrical Double‐Layer Capacitors , 1994 .

[45]  J. Tarascon,et al.  New electrolyte compositions stable over the 0 to 5 V voltage range and compatible with the Li1+xMn2O4/carbon Li-ion cells , 1994 .

[46]  J. Tarascon,et al.  Rechargeable Li1 + x Mn2 O 4 / Carbon Cells with a New Electrolyte Composition Potentiostatic Studies and Application to Practical Cells , 1993 .

[47]  Martin Winter,et al.  Inorganic film-forming electrolyte additives improving the cycling behaviour of metallic lithium electrodes and the self-discharge of carbon—lithium electrodes , 1993 .