Modelling dynamic recrystallisation in magnesium alloy AZ31

[1]  Shenyang Hu,et al.  Phase field modeling of discontinuous dynamic recrystallization in hot deformation of magnesium alloys , 2020 .

[2]  G. Proust,et al.  Modelling the temperature and texture effects on the deformation mechanisms of magnesium alloy AZ31 , 2020 .

[3]  R. Lebensohn,et al.  Modeling of the thermo-mechanical response and texture evolution of WE43 Mg alloy in the dynamic recrystallization regime using a viscoplastic self-consistent formulation , 2020 .

[4]  Xin Sun,et al.  Predicting forming limit diagrams for magnesium alloys using crystal plasticity finite elements , 2020 .

[5]  J. Dear,et al.  An experimental methodology to characterise post-necking behaviour and quantify ductile damage accumulation in isotropic materials , 2019, International Journal of Solids and Structures.

[6]  G. Proust.  Processing magnesium at room temperature , 2019, Science.

[7]  Ying-hong Peng,et al.  A polycrystal plasticity based thermo-mechanical-dynamic recrystallization coupled modeling method and its application to light weight alloys , 2019, International Journal of Plasticity.

[8]  Joshua S. Herrington,et al.  Interplay between the effects of deformation mechanisms and dynamic recrystallization on the failure of Mg-3Al-1Zn , 2019, Acta Materialia.

[9]  B. McWilliams,et al.  Effect of hot working and aging heat treatments on monotonic, cyclic, and fatigue behavior of WE43 magnesium alloy , 2019, Materials Science and Engineering: A.

[10]  R. Mccabe,et al.  Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation , 2019, Acta Materialia.

[11]  Ming-Song Chen,et al.  New insights on the relationship between flow stress softening and dynamic recrystallization behavior of magnesium alloy AZ31B , 2019, Materials Characterization.

[12]  Ying-hong Peng,et al.  Misorientation development in continuous dynamic recrystallization of AZ31B alloy sheet and polycrystal plasticity simulation , 2018, Materials Science and Engineering: A.

[13]  C. Boehlert,et al.  Contraction Twinning Dominated Tensile Deformation and Subsequent Fracture in Extruded Mg-1Mn (Wt Pct) at Ambient Temperature , 2018, Metallurgical and Materials Transactions A.

[14]  Ming-Song Chen,et al.  Modeling and simulation of dynamic recrystallization behaviors of magnesium alloy AZ31B using cellular automaton method , 2017 .

[15]  Ying-hong Peng,et al.  A polycrystal plasticity based discontinuous dynamic recrystallization simulation method and its application to copper , 2017 .

[16]  P. Gao.  Effects of sample orientation and processing temperature on dynamic recrystallization and mechanical behaviours of a Mg alloy under high strain-rate deformation , 2016 .

[17]  Ke Huang,et al.  A review of dynamic recrystallization phenomena in metallic materials , 2016 .

[18]  He Yang,et al.  A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation, DRX microstructural evolution and mechanical responses in titanium alloys , 2016 .

[19]  F. Pan,et al.  Modeling and application of constitutive model considering the compensation of strain during hot deformation , 2016 .

[20]  W. Ding,et al.  In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5Zr (wt.%) at elevated temperatures , 2016 .

[21]  A. Brahme,et al.  Effect of extension 101-2 twins on texture evolution at elevated temperature deformation accompanied by dynamic recrystallization , 2016 .

[22]  R. Mishra,et al.  Application of the VPSC Model to the Description of the Stress–Strain Response and Texture Evolution in AZ31 Mg for Various Strain Paths , 2015 .

[23]  G. Proust,et al.  Role of starting texture and deformation modes on low-temperature shear formability and shear localization of Mg–3Al–1Zn alloy , 2015 .

[24]  Akhtar S. Khan,et al.  Visco-plastic modeling of mechanical responses and texture evolution in extruded AZ31 magnesium alloy for various loading conditions , 2015 .

[25]  I. Beyerlein,et al.  Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr , 2015 .

[26]  K. Chung,et al.  Characterization of mechanical property of magnesium AZ31 alloy sheets for warm temperature forming , 2015 .

[27]  J. Cabrera,et al.  EBSD characterization of repetitive grain refinement in AZ31 magnesium alloy , 2015 .

[28]  D. Griffiths.  Explaining texture weakening and improved formability in magnesium rare earth alloys , 2015 .

[29]  P. Lejček,et al.  Boundary plane distribution for Σ13 grain boundaries in magnesium , 2014 .

[30]  Hongbiao Dong,et al.  Improved mechanical properties of AZ31 magnesium alloy plates by pre-rolling followed by warm compression , 2014 .

[31]  P. Rivera-Díaz-del-Castillo,et al.  Thermostastitical modelling of deformation twinning in HCP metals , 2014 .

[32]  Qing Liu,et al.  Deformation mechanisms and dynamic recrystallization of AZ31 Mg alloy with different initial textures during hot tension , 2013 .

[33]  D. Fullwood,et al.  Twinning in magnesium alloy AZ31B under different strain paths at moderately elevated temperatures , 2013 .

[34]  A. Zarei‐Hanzaki,et al.  On the recrystallization behavior of homogenized AZ81 magnesium alloy: The effect of mechanical twins and γ precipitates , 2012 .

[35]  Z. Cui,et al.  A new kinetics model of dynamic recrystallization for magnesium alloy AZ31B , 2011 .

[36]  Sangbong Yi,et al.  Influence of texture on the recrystallization mechanisms in an AZ31 Mg sheet alloy at dynamic rates , 2011 .

[37]  E. Marin,et al.  Twinning-induced dynamic recrystallization in a magnesium alloy extruded at 450 °C , 2011 .

[38]  Swarup Bag,et al.  A two-site mean field model of discontinuous dynamic recrystallization , 2011 .

[39]  M. Sanjari,et al.  Role of yttrium in the microstructure and texture evolution of Mg , 2011 .

[40]  A. Pandey,et al.  Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures , 2011 .

[41]  He Yang,et al.  Quantitative analysis of dynamic recrystallization behavior using a grain boundary evolution based kinetic model , 2010 .

[42]  X. Li,et al.  Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy , 2010 .

[43]  Gwénaëlle Proust,et al.  Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ31 , 2009 .

[44]  T. Al-Samman.  Comparative study of the deformation behavior of hexagonal magnesium–lithium alloys and a conventional magnesium AZ31 alloy , 2009 .

[45]  Sean R. Agnew,et al.  Crystal plasticity-based forming limit prediction for non-cubic metals: Application to Mg alloy AZ31B , 2009 .

[46]  T. Takaki,et al.  Multi-Phase-Field Model to Simulate Microstructure Evolutions during Dynamic Recrystallization , 2008 .

[47]  G. Gottstein,et al.  Dynamic recrystallization during high temperature deformation of magnesium , 2008 .

[48]  J. C. Huang,et al.  Producing nanograined microstructure in Mg–Al–Zn alloy by two-step friction stir processing , 2008 .

[49]  K. P. Rao,et al.  Processing maps for hot deformation of rolled AZ31 magnesium alloy plate: Anisotropy of hot workability , 2008 .

[50]  Carlos N. Tomé,et al.  A dislocation-based constitutive law for pure Zr including temperature effects , 2008 .

[51]  S. Spigarelli,et al.  Analysis of high-temperature deformation and microstructure of an AZ31 magnesium alloy , 2007 .

[52]  M. Barnett,et al.  Microstructural Development during Hot Working of Mg-3Al-1Zn , 2007 .

[53]  A. Zarei‐Hanzaki,et al.  Dynamic recrystallization in AZ31 magnesium alloy , 2007 .

[54]  S. Agnew,et al.  Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B , 2005 .

[55]  T. Sakai,et al.  Continuous Dynamic Recrystallization in Magnesium Alloy , 2003 .

[56]  Z. Guo,et al.  Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization , 2001 .

[57]  R. Kaibyshev,et al.  Dynamic Recrystallization in Pure Magnesium , 2001 .

[58]  Ricardo A. Lebensohn,et al.  A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals : application to zirconium alloys , 1993 .

[59]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .

[60]  W. Roberts,et al.  A nucleation criterion for dynamic recrystallization during hot working , 1978 .

[61]  F. N. Rhines,et al.  RATE OF SELF-DIFFUSION IN POLYCRYSTALLINE MAGNESIUM , 1954 .

[62]  P. Lukáč,et al.  Modeling of the work hardening in magnesium alloy sheets , 2016 .