Development and in vivo validation of tissue-engineered, small-diameter vascular grafts from decellularized aortae of fetal pigs and canine vascular endothelial cells

BackgroundTissue engineering has emerged as a promising alternative for small-diameter vascular grafts. The aim of this study was to determine the feasibility of using decellularized aortae of fetal pigs (DAFPs) to construct tissue-engineered, small-diameter vascular grafts and to test the performance and application of DAFPs as vascular tissue-engineered scaffolds in the canine arterial system.MethodsDAFPs were prepared by continuous enzymatic digestion. Canine vascular endothelial cells (ECs) were seeded onto DAFPs in vitro and then the vascular grafts were cultured in a custom-designed vascular bioreactor system for 7 days of dynamic culture following 3 days of static culture. The grafts were then transplanted into the common carotid artery of the same seven dogs from which ECs had been derived (two grafts were prepared for each dog with one as a backup; therefore, a total of 14 tissue-engineered blood vessels were prepared). At 1, 3, and 6 months post-transplantation, ultrasonography and contrast-enhanced computed tomography (CT) were used to check the patency of the grafts. Additionally, vascular grafts were sampled for histological and electron microscopic examination.ResultsTissue-engineered, small-diameter vascular grafts can be successfully constructed using DAFPs and canine vascular ECs. Ultrasonographic and CT test results confirmed that implanted vascular grafts displayed good patency with no obvious thrombi. Six months after implantation, the grafts had been remodeled and exhibited a similar structure to normal arteries. Immunohistochemical staining showed that cells had evenly infiltrated the tunica media and were identified as muscular fibroblasts. Scanning electron microscopy showed that the graft possessed a complete cell layer, and the internal cells of the graft were confirmed to be ECs by transmission electron microscopy.ConclusionsTissue-engineered, small-diameter vascular grafts constructed using DAFPs and canine vascular ECs can be successfully transplanted to replace the canine common carotid artery. This investigation potentially paves the way for solving a problem of considerable clinical need, i.e., the requirement for small-diameter vascular grafts.

[1]  D. Cooper,et al.  The need for xenotransplantation as a source of organs and cells for clinical transplantation. , 2015, International journal of surgery.

[2]  Yufeng Zheng,et al.  Electrospinning of PLGA/gelatin randomly-oriented and aligned nanofibers as potential scaffold in tissue engineering , 2010 .

[3]  Michael S Sacks,et al.  Effects of decellularization on the mechanical and structural properties of the porcine aortic valve leaflet. , 2008, Biomaterials.

[4]  A. Horsch,et al.  Peripheral artery disease , 2018, British Medical Journal.

[5]  D. Ayares,et al.  The role of genetically engineered pigs in xenotransplantation research , 2016, The Journal of pathology.

[6]  Zhijuan He,et al.  Decellularized aorta of fetal pigs as a potential scaffold for small diameter tissue engineered vascular graft. , 2008, Chinese medical journal.

[7]  M. Boyer,et al.  Improved adherence of genetically modified endothelial cells to small-diameter expanded polytetrafluoroethylene grafts in a canine model. , 1998, Journal of vascular surgery.

[8]  A. Haverich,et al.  Effect of Intensified Decellularization of Equine Carotid Arteries on Scaffold Biomechanics and Cytotoxicity , 2015, Annals of Biomedical Engineering.

[9]  S. Fu,et al.  Small Diameter Blood Vessels Bioengineered From Human Adipose-derived Stem Cells , 2016, Scientific Reports.

[10]  Yong-Gon Koh,et al.  Trends in Tissue Engineering for Blood Vessels , 2012, Journal of biomedicine & biotechnology.

[11]  D. Larkin,et al.  The Influence of Donor and Recipient Gender Incompatibility on Corneal Transplant Rejection and Failure , 2017, American journal of transplantation : official journal of the American Society of Transplantation and the American Society of Transplant Surgeons.

[12]  R. Marchant,et al.  Endothelial cell attachment and shear response on biomimetic polymer-coated vascular grafts. , 2012, Journal of biomedical materials research. Part A.

[13]  Yong Woo Cho,et al.  Decellularized extracellular matrix derived from porcine adipose tissue as a xenogeneic biomaterial for tissue engineering. , 2012, Tissue engineering. Part C, Methods.

[14]  F. O'Brien.  Biomaterials & scaffolds for tissue engineering , 2011 .

[15]  C. Breuer,et al.  Vascular tissue engineering: the next generation. , 2012, Trends in molecular medicine.

[16]  J. Praestgaard,et al.  Donor hemodynamic profile presages graft survival in donation after cardiac death liver transplantation , 2014, Liver transplantation : official publication of the American Association for the Study of Liver Diseases and the International Liver Transplantation Society.

[17]  Michael Horrocks,et al.  Preparation of porcine carotid arteries for vascular tissue engineering applications. , 2004, Journal of biomedical materials research. Part A.

[18]  Chuanglong He,et al.  Heparinized PLLA/PLCL nanofibrous scaffold for potential engineering of small-diameter blood vessel: tunable elasticity and anticoagulation property. , 2015, Journal of biomedical materials research. Part A.

[19]  P. Real,et al.  Poly(ethylmethacrylate-co-diethylaminoethyl acrylate) coating improves endothelial re-population, bio-mechanical and anti-thrombogenic properties of decellularized carotid arteries for blood vessel replacement , 2017, Scientific Reports.

[20]  Xiaolin Zhou,et al.  Tissue-Engineered Vessel Strengthens Quickly under Physiological Deformation: Application of a New Perfusion Bioreactor with Machine Vision , 2005, Journal of Vascular Research.

[21]  S. Badylak,et al.  Extracellular matrix as a biological scaffold material: Structure and function. , 2009, Acta biomaterialia.

[22]  Guixue Wang,et al.  Biomechanical regulation of vascular smooth muscle cell functions: from in vitro to in vivo understanding , 2014, Journal of The Royal Society Interface.

[23]  A Haverich,et al.  Use of a fibrin preparation in the engineering of a vascular graft model. , 2004, European journal of vascular and endovascular surgery : the official journal of the European Society for Vascular Surgery.

[24]  Donald O Freytes,et al.  Reprint of: Extracellular matrix as a biological scaffold material: Structure and function. , 2015, Acta biomaterialia.

[25]  G. Truskey,et al.  Biological and engineering design considerations for vascular tissue engineered blood vessels (TEBVs). , 2014, Current opinion in chemical engineering.

[26]  S. Andreadis,et al.  Hair follicle-derived smooth muscle cells and small intestinal submucosa for engineering mechanically robust and vasoreactive vascular media. , 2011, Tissue engineering. Part A.

[27]  Jun Fu,et al.  Degradable natural polymer hydrogels for articular cartilage tissue engineering , 2013 .

[28]  Narutoshi Hibino,et al.  Cell-seeding techniques in vascular tissue engineering. , 2010, Tissue engineering. Part B, Reviews.

[29]  T. Ciach,et al.  Surface modification and endothelialization of polyurethane for vascular tissue engineering applications: a review. , 2016, Biomaterials science.

[30]  Y. Liu,et al.  The Fetal Porcine Aorta and Mesenteric Acellular Matrix as Small-caliber Tissue Engineering Vessels and Microvasculature Scaffold , 2013, Aesthetic Plastic Surgery.

[31]  George J Christ,et al.  Smooth muscle cell seeding of decellularized scaffolds: the importance of bioreactor preconditioning to development of a more native architecture for tissue-engineered blood vessels. , 2009, Tissue engineering. Part A.

[32]  Jason A Burdick,et al.  Progress in material design for biomedical applications , 2015, Proceedings of the National Academy of Sciences.

[33]  N. Ieronimakis,et al.  Isolation, Characterization, and Transplantation of Cardiac Endothelial Cells , 2013, BioMed research international.

[34]  D. Lyman,et al.  Effects of a vascular graft/natural artery compliance mismatch on pulsatile flow. , 1992, Journal of biomechanics.

[35]  Laura E Niklason,et al.  Vascular Tissue Engineering: Building Perfusable Vasculature for Implantation. , 2014, Current opinion in chemical engineering.