Computationally efficient beam elements for accurate stresses in sandwich laminates and laminated composites with delaminations.

Laminated composites are prone to delamination failure due to the lack of reinforcement through the thickness. Therefore, during the design process the initiation and propagation of delaminations should be accounted for as early as possible. This paper presents computationally efficient nine degree-of-freedom (dof) and eight-dof shear locking-free beam elements using the mixed form of the refined zigzag theory (RZT(m)). The corresponding nine-dof and eight-dof elements use the anisoparametric and constrained anisoparametric interpolation schemes, respectively, to eliminate shear locking in slender beams. The advantage of the present element over previous RZT beam elements is that no post-processing is required to accurately model the transverse shear stress while maintaining the computational efficiency of a low-order beam element. Comparisons with high-fidelity finite element models and three-dimensional elasticity solutions show that the elements can robustly and accurately predict the displacement field, axial stress and transverse shear stress through the thickness of a sandwich beam or a composite laminate with an embedded delamination. In fact, the accuracy and computational efficiency of predicting stresses in laminates with embedded delaminations make the present elements attractive choices for RZT-based delamination initiation and propagation methodologies available in the literature.

[1]  N. Pagano,et al.  Exact Solutions for Composite Laminates in Cylindrical Bending , 1969 .

[2]  L. Demasi.  Partially Zig-Zag Advanced Higher Order Shear Deformation Theories Based on the Generalized Unified Formulation , 2012 .

[3]  Raimund Rolfes,et al.  A hierarchic 3D finite element for laminated composites , 2004 .

[4]  E. Carrera.  Developments, ideas, and evaluations based upon Reissner’s Mixed Variational Theorem in the modeling of multilayered plates and shells , 2001 .

[5]  M. Gherlone,et al.  Refined zigzag theory for homogeneous, laminated composite, and sandwich plates: a homogeneous limit methodology for zigzag function selection , 2010 .

[6]  Raimund Rolfes,et al.  Improved transverse shear stresses in composite finite elements based on first order shear deformation theory , 1997 .

[7]  J. Whitney,et al.  Stress Analysis of Thick Laminated Composite and Sandwich Plates , 1972 .

[8]  Alexander Tessler,et al.  Refined zigzag theory for homogeneous, laminated composite, and sandwich beams derived from Reissner’s mixed variational principle , 2015 .

[9]  Paul M. Weaver,et al.  A computationally efficient 2D model for inherently equilibrated 3D stress predictions in heterogeneous laminated plates. Part I: Model formulation , 2016 .

[10]  Hidenori Murakami,et al.  Laminated Composite Plate Theory With Improved In-Plane Responses , 1986 .

[11]  P M Weaver,et al.  Deleterious localized stress fields: the effects of boundaries and stiffness tailoring in anisotropic laminated plates , 2016, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[12]  R. Christensen,et al.  A High-Order Theory of Plate Deformation—Part 2: Laminated Plates , 1977 .

[13]  Tim Schmitz,et al.  Mechanics Of Composite Materials , 2016 .

[14]  Y. Stavsky,et al.  Elastic wave propagation in heterogeneous plates , 1966 .

[15]  Marco Gherlone,et al.  C0 beam elements based on the Refined Zigzag Theory for multilayered composite and sandwich laminates , 2011 .

[16]  J. N. Reddy,et al.  A refined nonlinear theory of plates with transverse shear deformation , 1984 .

[17]  Marco Di Sciuva.  A refinement of the transverse shear deformation theory for multilayered of orthotropic plates , 1983 .

[18]  M. Gherlone.  On the Use of Zigzag Functions in Equivalent Single Layer Theories for Laminated Composite and Sandwich Beams: A Comparative Study and Some Observations on External Weak Layers , 2013 .

[19]  R. Batra,et al.  Higher-Order Piezoelectric Plate Theory Derived from a Three-Dimensional Variational Principle , 2002 .

[20]  P. Ermanni,et al.  Higher-order beam model for stress predictions in curved beams made from anisotropic materials , 2016 .

[21]  E. Reissner.  ON THE THEORY OF BENDING OF ELASTIC PLATES , 1944 .

[22]  Raimund Rolfes,et al.  Efficient linear transverse normal stress analysis of layered composite plates , 1998 .

[23]  F. B. Hildebrand,et al.  Notes on the foundations of the theory of small displacements of orthotropic shells , 1949 .

[24]  Paul M. Weaver,et al.  On displacement-based and mixed-variational equivalent single layer theories for modelling highly heterogeneous laminated beams , 2015 .

[25]  S. A. Ambartsumian,et al.  On a general theory of anisotropic shells , 1958 .

[26]  E. Reissner.  On a certain mixed variational theorem and a proposed application , 1984 .

[27]  N. J. Pagano,et al.  Interlaminar Stresses in Composite Laminates Under Uniform Axial Extension , 1970 .

[28]  E. Reissner.  The effect of transverse shear deformation on the bending of elastic plates , 1945 .

[29]  Luigi Iurlaro,et al.  A class of higher-order C0 composite and sandwich beam elements based on the Refined Zigzag Theory , 2015 .

[30]  Marco Gherlone,et al.  A consistent refinement of first-order shear deformation theory for laminated composite and sandwich plates using improved zigzag kinematics , 2010 .

[31]  P. Weaver,et al.  Application of the Refined Zigzag Theory to the Modeling of Delaminations in Laminated Composites , 2015 .

[32]  G. Kirchhoff,et al.  Über das Gleichgewicht und die Bewegung einer elastischen Scheibe. , 1850 .

[33]  Ugo Icardi,et al.  Assessment of recent zig-zag theories for laminated and sandwich structures , 2016 .

[34]  Marco Gherlone,et al.  Refined Zigzag Theory for Laminated Composite and Sandwich Plates , 2015 .

[36]  G. C. Everstine,et al.  Stress channelling in transversely isotropic elastic composites , 1971 .

[37]  W. G. Bickley.  Mathematical Theory Of Elasticity , 1946, Nature.

[38]  R. D. Mindlin,et al.  Influence of rotary inertia and shear on flexural motions of isotropic, elastic plates , 1951 .

[39]  M. Levinson,et al.  A new rectangular beam theory , 1981 .

[40]  Sergio Oller,et al.  A numerical model of delamination in composite laminated beams using the LRZ beam element based on the refined zigzag theory , 2013 .

[41]  Luigi Iurlaro,et al.  The (3,2)-Mixed Refined Zigzag Theory for generally laminated beams: Theoretical development and C0 finite element formulation , 2015 .

[42]  S. B. Dong,et al.  On a hierarchy of conforming timoshenko beam elements , 1981 .

[43]  M. Gherlone,et al.  Refinement of Timoshenko Beam Theory for Composite and Sandwich Beams Using Zigzag Kinematics , 2007 .