Microstructure and mechanical properties of multi-scale α-Fe reinforced Cu–Fe composite produced by vacuum suction casting

[1]  Xiang Yu,et al.  Effect of Dual-Scale Fecrsi Phase on the Strength and Conductivity of Cu-2.5fe-0.3cr-0.2si Alloy , 2022, SSRN Electronic Journal.

[2]  N. Schell,et al.  Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal , 2022, Scripta Materialia.

[3]  Jingwen Su,et al.  A comparative study of metastable phase separation for undercooled liquid Fe35Cu65 alloy under natural and forced cooling conditions , 2022, Journal of Alloys and Compounds.

[4]  Y. Zhong,et al.  Grain refinement and mechanical properties enhancement of Cu-10wt%Fe alloys via Zr addition , 2022, Materials Science and Engineering: A.

[5]  Yidi Li,et al.  Influence of Minor Ag Addition on the Microstructure and Properties of Powder Metallurgy Cu-10 wt.% Fe Alloy , 2022, Journal of Alloys and Compounds.

[6]  Shichao Liu,et al.  Microstructure evolution and magnetic properties of metastable immiscible Cu-Fe alloy with micro-alloying B element , 2021 .

[7]  Jung‐Wook Cho,et al.  Effect of Zr addition on metastable Liquid-Liquid Phase Separation of Cu-Fe alloys , 2021 .

[8]  N. Schell,et al.  Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing , 2021, Materials & Design.

[9]  Liang Yang,et al.  Tensile properties of Ti–48Al–2Cr–2Nb alloy having similarly oriented lamellae with fine lamellar spacing facilitated by suction casting , 2021, Materials Science and Engineering: A.

[10]  Zhou Li,et al.  Effects of Fe content on microstructure and properties of Cu–Fe alloy , 2021, Transactions of Nonferrous Metals Society of China.

[11]  Zhou Li,et al.  Microstructure and properties of high strength, high conductivity and magnetic Cu–10Fe-0.4Si alloy , 2021, Materials Science and Engineering: A.

[12]  O. Umezawa,et al.  Work hardening behavior of dual phase copper–iron alloy at low temperature , 2021, Materials Science and Engineering: A.

[13]  Bin Yang,et al.  Effect of Mg addition on Fe phase morphology, distribution and aging kinetics of Cu-6.5Fe alloy , 2021 .

[14]  I. Figueroa,et al.  Study of the microstructure and mechanical properties of Al-Si-Fe with additions of chromium by suction casting , 2021 .

[15]  Q. Lei,et al.  Microstructure evolution and deformation behaviour of Cu-10 wt%Fe alloy during cold rolling , 2021, Materials Science and Engineering: A.

[16]  Xiaobo Yuan,et al.  Microstructure and mechanical properties of a Cu-Fe-Nb alloy with a high product of the strength times the elongation , 2020 .

[17]  Je-hyun Lee,et al.  Alloy design strategies to increase strength and its trade-offs together , 2020 .

[18]  Hyoung-Seop Kim,et al.  A new strategy for designing immiscible medium-entropy alloys with excellent tensile properties , 2020 .

[19]  C. S. Liu,et al.  Effects of annealing temperature and layer thickness on hardening behavior in cross accumulative roll bonded Cu/Fe nanolamellar composite , 2020, Journal of Alloys and Compounds.

[20]  Hongxiang Jiang,et al.  Microstructure formation and electrical resistivity behavior of rapidly solidified Cu-Fe-Zr immiscible alloys , 2020 .

[21]  Zhou Li,et al.  Microstructure and properties of Cu-10 wt%Fe alloy produced by double melt mixed casting and multi-stage thermomechanical treatment , 2020 .

[22]  C. Dong,et al.  Comparative studies on microstructures and properties of Cu–Ni–M alloys controlled by strong interaction between elements , 2019, Journal of Alloys and Compounds.

[23]  S. Hong,et al.  A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements , 2019, Journal of Alloys and Compounds.

[24]  Shichao Liu,et al.  Novel insight into evolution mechanism of second liquid-liquid phase separation in metastable immiscible Cu-Fe alloy , 2018, Materials & Design.

[25]  K. Chattopadhyay,et al.  Development of a new class of high strength copper alloy using immiscibility route in Cu-Fe-Si system: Evolution of hierarchical multi-scale microstructure , 2018 .

[26]  Q. Lei,et al.  Microstructure and properties of a novel Cu-Mg-Ca alloy with high strength and high electrical conductivity , 2017 .

[27]  Young Seok Kim,et al.  Effect of silicon on microstructure and mechanical properties of Cu-Fe alloys , 2017 .

[28]  Lei Wu.  Renormalized energy for dislocations in quasi-crystals , 2016, 1612.02704.

[29]  Jianbo Lei,et al.  Effect of Fe content on microstructure and mechanical properties of Cu–Fe-based composite coatings by laser induction hybrid rapid cladding , 2016 .

[30]  W. Liang,et al.  Influence of Ca addition on microstructural evolution and mechanical properties of near-eutectic Mg–Li alloys by copper-mold suction casting , 2016 .

[31]  M. Guo,et al.  The microstructure controlling and deformation behaviors of Cu–Fe–C alloy prepared by rapid solidification , 2016 .

[32]  K. An,et al.  A precipitation-hardened high-entropy alloy with outstanding tensile properties , 2016 .

[33]  Yong Li,et al.  Comparative study of the influence of Ag on the microstructure and mechanical properties of Cu-10Fe in situ composites , 2015 .

[34]  Zhou Li,et al.  Diffraction analysis of α-Fe precipitates in a polycrystalline Cu–Fe alloy , 2015 .

[35]  J. Tian,et al.  Effect of Step Quenching and Zr Addition on the Microstructure and Mechanical Properties of Al-Mg-Si Alloy , 2014 .

[36]  Q. Lei,et al.  A new ultrahigh strength Cu-Ni-Si alloy , 2013 .

[37]  Yunzhi Wang,et al.  Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys , 2013 .

[38]  S. Sobolev.  An analytical model for local-nonequilibrium solute trapping during rapid solidification , 2012 .

[39]  N. Liu.  Investigation on the phase separation in undercooled Cu–Fe melts , 2012 .

[40]  Z. Yuhui,et al.  Study on mechanical properties of Mg-Al-Zn-Mn alloys cast by two different methods , 2009 .

[41]  Lorenz Ratke,et al.  Solidification microstructure and dynamics of metastable phase transformation in undercooled liquid Cu–Fe alloys , 2006 .

[42]  D. Shu,et al.  Effect of Ag on the microstructure and properties of Cu-Fe in situ composites , 2005 .

[43]  Jiu-zhou Zhao,et al.  Behavior of Fe-rich phase during rapid solidification of Cu–Fe hypoperitectic alloy , 2005 .

[44]  X. J. Liu,et al.  Formation of Immiscible Alloy Powders with Egg-Type Microstructure , 2002, Science.

[45]  Jeheon Song,et al.  Strength and electrical conductivity of Cu–9Fe–1.2Co filamentary microcomposite wires , 2000 .

[46]  M. M. Raja,et al.  Structural and magnetic investigations on the metastable phases of the mechanically alloyed FeCu system , 1997 .

[47]  R. Valiev,et al.  Structural Evolution and Validity of Hall-Petch Relationship in an Al-3% Mg Alloy with Submicron Grain Size , 1996 .

[48]  L. Ratke,et al.  Liquid immiscible alloys , 1995 .

[49]  D. G. Morris,et al.  Microstructure and strength of CuFe in situ composites obtained from prealloyed CuFe powders , 1994 .

[50]  K. Hono,et al.  Atom-probe analysis of γ-iron precipitates in Cu-1.2at%Fe alloys , 1988 .

[51]  W. A. Spitzig,et al.  Characterization of the strength and microstructure of heavily cold worked CuNb composites , 1987 .

[52]  L. Murr,et al.  A model for the formation of annealing twins in F.C.C. metals and alloys , 1978 .

[53]  N. Brown,et al.  An investigation of the origin and growth of annealing twins , 1963 .