Electromechanical actuators affected by multiple failures: a simulated-annealing-based fault identification algorithm

The identification of early evidences on monitored parameters allows preventing incoming faults. Early alerts can avoid rate of the failures and trigger proper out-of-schedule maintenance activities. For this purpose, there are many prognostic approaches. This paper takes into account a primary flight command electromechanical actuator (EMA) with multiple failures originating from progressive wear and proposes a fault detection approach that identifies symptoms of EMA degradation through a simulated annealing (SA) optimization algorithm; in particular, the present work analyses the functioning of this prognostic tool in three different fault configurations and it focuses on the consequences of multiple failures. For this purpose, we developed a test bench and obtained experimental data necessary to validate the results originated from the model. Such comparison demonstrates that this method is affordable and able to detect failures before they occur, thus reducing the occurrence of false alarms or unexpected failures. © 2016, North Atlantic University Union. All rights reserved

[1]  Matteo Davide Lorenzo Dalla Vedova,et al.  Linear Electromechanical Actuators Affected by Mechanical Backlash: a Fault Identification Method Based on Simulated Annealing Algorithm , 2015 .

[2]  Bijay Ketan Panigrahi,et al.  Simulated annealing approach for solving economic load dispatch problems with valve point loading effects , 2013 .

[3]  M. Pirlot.  General local search methods , 1996 .

[4]  M. F. Cardoso,et al.  The simplex-simulated annealing approach to continuous non-linear optimization , 1996 .

[5]  Dean Karnopp,et al.  Computer simulation of stick-slip friction in mechanical dynamic systems , 1985 .

[6]  Matteo Davide Lorenzo Dalla Vedova,et al.  Model based analysis of precursors of electromechanical servomechanisms failures using an artificial neural network , 2015 .

[7]  M. Howse,et al.  All-electric aircraft , 2003 .

[8]  C.S. Byington,et al.  A model-based approach to prognostics and health management for flight control actuators , 2004, 2004 IEEE Aerospace Conference Proceedings (IEEE Cat. No.04TH8720).

[9]  Steven T. Karris.  Introduction to Simulink with Engineering Applications , 2006 .

[10]  Matteo Davide Lorenzo Dalla Vedova,et al.  A dry friction model and robust computational algorithm for reversible or irreversible motion transmission , 2012 .

[11]  Matteo Davide Lorenzo Dalla Vedova,et al.  A Prognostic Model for Electrohydraulic Servovalves , 2009 .

[12]  R.E.J. Quigley.  More Electric Aircraft , 1993, Proceedings Eighth Annual Applied Power Electronics Conference and Exposition,.

[13]  Matteo Davide Lorenzo Dalla Vedova,et al.  Identification of Precursors of Servovalves Failures for Implementation of an Effective Prognostics , 2010 .

[14]  Matteo Davide Lorenzo Dalla Vedova,et al.  A New Prognostic Method Based on Simulated Annealing Algorithm to Deal with the Effects of Dry Friction on Electromechanical Actuators , 2015 .

[15]  Matteo Davide Lorenzo Dalla Vedova,et al.  Proposal of Prognostic Parametric Method Applied to an Electrohydraulic Servomechanism Affected by Multiple Failures , 2014 .

[16]  N. Metropolis,et al.  Equation of State Calculations by Fast Computing Machines , 1953, Resonance.