Application of ANOVA method to precipitation behaviour studies

The Analysis of variance (ANOVA) method has been used to illustrate the implementation of adaptive numerical (AN) techniques for the prediction of the precipitation behaviour of commercial materials. Case studies involving the analysis of σ-phase precipitation kinetics in duplex stainless steel (DSS) produced by sand casting and age hardening of 2219 aluminium alloy microalloyed with Ge and/or Si are presented. For each alloy, complex datasets comprised the results obtained from heat treatment trials on a range of commercial processing conditions, so that a single and combined effect of various parameters can be determined. This enabled an estimate of the most influential parameters to be made, providing an effective means of commercial alloy development and process optimisation.

[1]  S. Ringer,et al.  The effect of trace additions of sn on precipitation in Al-Cu alloys: An atom probe field ion microscopy study , 1995 .

[2]  Prediction of surface hardness after ferritic nitrocarburising of steels using artificial neural networks , 2001 .

[3]  J. Lippold,et al.  The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels , 2003 .

[4]  V. Radmilović,et al.  Resistance to shape refinement of precipitates in Al-(Si,Ge) alloys during thermal cycling , 2003 .

[5]  V. Radmilović,et al.  Catalyzed precipitation in Al-Cu-Si , 2000 .

[6]  L. Karlsson,et al.  Secondary austenite for mation and its relation to pitting corrosion in duplex stainless steel weld metal , 1995 .

[7]  C. Shek,et al.  Early stages of decomposition of ferrite in duplex stainless steel , 1994 .

[8]  A. Wilson,et al.  Mechanical properties, microstructural stability and kinetics of σ-phase formation in 29Cr-6Ni-2Mo-0.38N superduplex stainless steel , 2000 .

[9]  P. Neumann,et al.  Steels and materials for power plants , 2000 .

[10]  K. Easterling,et al.  Phase Transformations in Metals and Alloys , 2021 .

[11]  V. Radmilović,et al.  Precipitation and aging in Al-Si-Ge-Cu , 2001 .

[12]  A. Mukhopadhyay Influence of Cu additions on the morphology of GeSi precipitates in an Al-Ge-Si alloy , 2001 .

[13]  Kwangmin Lee,et al.  Effect of isothermal treatment of SAF 2205 duplex stainless steel on migration of δ/γ interface boundary and growth of austenite , 1999 .

[14]  Samuel M. Allen,et al.  Microstructural development during solidification of stainless steel alloys , 1989 .

[15]  J. Barcik,et al.  Chemical composition of σ phase precipitated in chromium–nickel austenitic steels , 1983 .

[16]  A. Wilson,et al.  Structural stability of super duplex stainless weld metals and its dependence on tungsten and copper , 1996 .

[17]  Ian Sinclair,et al.  Predicting the Structural Performance of Heat-Treatable Al-Alloys , 2000 .

[18]  Phillip J. Ross,et al.  Taguchi Techniques For Quality Engineering: Loss Function, Orthogonal Experiments, Parameter And Tolerance Design , 1988 .

[19]  M. Cortie,et al.  Simulation of the precipitation of sigma phase in duplex stainless steels , 1997 .

[20]  G. Keppel,et al.  Data analysis for research designs: Analysis of variance and multiple regression/correlation approaches. , 1990 .

[21]  G. H. Wagner,et al.  Service Experience with duplex stainless steels in the chemical industry , 1995 .

[22]  S. W. Thompson,et al.  Fracture and the formation of sigma phase, M23C6, and austenite from delta-ferrite in an AlSl 304L stainless steel , 1994 .

[23]  V. Radmilović,et al.  On the nucleation and growth of Al2CuMg (S′) in AlLiCuMg and AlCuMg alloys , 1989 .

[24]  Steve R. Gunn,et al.  Adaptive Numerical Modelling of Commercial Aluminium Plate Performance , 2000 .

[25]  M. Puiggali,et al.  Influence of o-phase on mechanical properties and corrosion resistance of duplex stainless steels , 1999 .