论文信息 - Analysis of the effects of processing parameters on mechanical properties and formability of cold rolled low carbon steel sheets using neural networks

Analysis of the effects of processing parameters on mechanical properties and formability of cold rolled low carbon steel sheets using neural networks

Abstract In the present study, an artificial neural network (ANN) is used to describe the effects of processing parameters on the evolution of mechanical properties and formability of deep drawing quality (DDQ) steel sheets. This model is a feed forward back-propagation neural network (BPNN) with a set of 19 parameters including chemical composition, hot and cold rolling parameters, and subsequent batch annealing process parameters to predict the final properties, including yield strength (YS), work hardening exponent (n), and plastic strain ratio ( r ¯ ), of sheets. ANN system was trained using the prepared training set. After training process, the test data were used to check system accuracy. The results show that the model can be used as a quantitative guide to control the final formability properties of commercial low carbon steel products.

[1] Formability analysis of extra-deep drawing steel , 2002 .

[2] C. Capdevila,et al. Global recrystallisation model of low carbon sheet steels with different cementite contents , 2009 .

[3] J. Jonas,et al. Cold rolling and annealing textures in low carbon and extra low carbon steels , 1994 .

[4] C. Sathiya Narayanan,et al. Modelling of forming limit diagram of perforated commercial pure aluminium sheets using artificial neural network , 2010 .

[5] S. Sahay,et al. Heating rate effects during non-isothermal annealing of AIK steel , 2003 .

[6] Seong-Gu Hong,et al. Modeling medium carbon steels by using artificial neural networks , 2009 .

[7] J. Vogt,et al. Empirical model predicting the value of the strain-hardening exponent of a Ti-IF steel grade , 2006 .

[8] Amit Gupta,et al. Formability of galvanized interstitial-free steel sheets , 2006 .

[9] Sanak Mishra,et al. On the formability of sheet steels , 1996 .

[10] Dierk Raabe,et al. Prediction of cold rolling texture of steels using an Artificial Neural Network , 2009 .

[11] B. Buchmayr,et al. Aluminum nitride precipitation and texture development in batch-annealed bake-hardening steel , 1999 .

[12] Z. Fan,et al. The relationship between the strain-hardening exponent n and the microstructure of metals , 1989 .

[13] Francisca García Caballero,et al. Neural network analysis of the influence of processing on strength and ductility of automotive low carbon sheet steels , 2006 .