Investigations of structural vibrations problems of high performance machines

High performance machines are prone to presence of different types of dynamic loads, which can lead to vibrations of the entire structures or their local parts. In the paper examples of identifications of vibration problems of High Performance Machines are shown. Investigations base on experimental methods and numerical simulations. In addition, the methods of preventing vibration of the investigated objects such as bucket wheel excavators, roller mills, crushers, load carrying structures are presented.

[1]  Nebojša B. Gnjatović,et al.  Bucket wheel failure caused by residual stresses in welded joints , 2011 .

[2]  Damian Derlukiewicz,et al.  The Operator Protective Structures Testing for Mining Machines , 2010 .

[3]  Miodrag Arsić,et al.  Bucket wheel excavator: Integrity assessment of the bucket wheel boom tie-rod welded joint , 2011 .

[4]  Bogdan Sapiński,et al.  Vibration isolation using nonlinear damping implemented by a feedback-controlled MR damper , 2013 .

[5]  Felix Weber,et al.  Frequency and damping adaptation of a TMD with controlled MR damper , 2012 .

[6]  Damian Pietrusiak.  Problems of steel construction modal models identification Problemy identyfikacji modeli modalnych stalowych ustrojów nośnych , 2012 .

[7]  Olaf Steinbach,et al.  Advanced Finite Element Methods and Applications , 2013 .

[9]  Katarzyna BIAŁAS.  Mechanical and electrical elements in reduction of vibrations , 2012 .

[10]  Andrzej Buchacz,et al.  Damping of Mechanical Vibrations Using Piezoelements, Including Influence of Connection Layer’s Properties on the Dynamic Characteristic , 2009 .

[11]  Eugeniusz Rusiński,et al.  Implementation of experimental method of determining modal characteristics of surface mining machinery in the modernization of the excavating unit , 2012 .

[12]  K. Białas.  Application of mechanical and electrical elements in reduction of vibration , 2012 .

[13]  Nenad Zrnić,et al.  Failure analysis of the end eye connection of the bucket wheel excavator portal tie-rod support , 2009 .

[14]  C. Ross,et al.  Advanced finite element methods , 1998 .

[15]  Mariusz Ptak,et al.  Simulation tests of roll-over protection structure , 2013 .

[16]  Mohamed Bouazara,et al.  Fatigue Failure Study of the Lower Suspension Vehicle Arm Using a Multiaxial Criterion of the Strain Energy Density , 2011 .