Characteristic and magnetic field analysis of a high temperature superconductor axial-flux coreless induction maglev motor.

A new high temperature superconductor axial-flux coreless maglev motor (HTS AFIM) is proposed, of which the primary windings are made of HTS tapes and the secondary is a non-magnetic conductor. The main works of this paper are the magnetic-field computation and characteristics analysis of HTS AFIM. For the first one, the reduction of magnetic fields near outer and inner radius of the HTS AFIM is solved by introducing the sub-loop electro-magnetic model along the radial position. For the second one, the AC losses of HTS coils are calculated. The relationships between the device's characteristics and device parameters are presented, and the results indicate that under certain frequency and current levitation device can output enough lift force. The conclusions are verified by finite element calculations.

[1]  Jin Fang,et al.  Comparison between measured and numerically calculated AC losses in second-generation high temperature superconductor pancake coils , 2011 .

[2]  T. Zheng,et al.  Influence analysis of structural parameters on electromagnetic properties of HTS linear induction motor , 2011 .

[3]  Jianguo Zhu,et al.  Influence of external traveling-wave magnetic field on trapped field of a high temperature superconducting bulk magnet used in a linear synchronous motor , 2011 .

[4]  W. Yuan,et al.  ac losses and field and current density distribution during a full cycle of a stack of superconducting tapes , 2010 .

[5]  T. A. Coombs,et al.  A model for calculating the AC losses of second-generation high temperature superconductor pancake coils , 2009 .

[6]  J. Bird,et al.  Calculating the Forces Created by an Electrodynamic Wheel Using a 2-D Steady-State Finite-Element Method , 2008, IEEE Transactions on Magnetics.

[7]  J. Bird,et al.  A 3-D Magnetic Charge Finite-Element Model of an Electrodynamic Wheel , 2008, IEEE Transactions on Magnetics.

[8]  T. Lipo,et al.  Characteristics of an Electrodynamic Wheel Using a 2-D Steady-State Model , 2007, IEEE Transactions on Magnetics.

[9]  T. Morishita,et al.  Development of an Axial Flux Type PM Synchronous Motor With the Liquid Nitrogen Cooled HTS Armature Windings , 2007, IEEE Transactions on Applied Superconductivity.

[10]  Jian Xun Jin,et al.  Design and Analysis of a Prototype Linear Motor Driving System for HTS Maglev Transportation , 2007, IEEE Transactions on Applied Superconductivity.

[11]  Yaow-Ming Chen,et al.  Electromagnetic-force analysis of the magnetically levitated motor with two directions of movement , 2006 .

[12]  T. Lipo,et al.  Design of a linear bulk superconductor magnet synchronous motor for electromagnetic aircraft launch systems , 2004, IEEE Transactions on Applied Superconductivity.

[13]  K. Sato,et al.  HTS large scale application using BSCCO conductor , 1997, IEEE Transactions on Applied Superconductivity.