Research on the Drilling Performance of a Helical Point Micro Drill with Different Geometry Parameters
暂无分享,去创建一个
Xibin Wang | Tianfeng Zhou | Li Jiao | Suyan Zhang | Zhiqiang Liang | Haixin Guo | Pei Yan | L. Jiao | Xibin Wang | Zhiqiang Liang | Haixin Guo | Tianfeng Zhou | P. Yan | Suyan Zhang
[1] Li Jiao,et al. Grinding process of helical micro-drill using a six-axis CNC grinding machine and its fundamental drilling performance , 2016 .
[2] Sung-Hoon Ahn,et al. Geometric optimization of micro drills using Taguchi methods and response surface methodology , 2011 .
[3] Ming Chen,et al. Experimental investigation of microdrilling of printed circuit board , 2013 .
[4] Lan Yan,et al. A practical optimization design of helical geometry drill point and its grinding process , 2013 .
[5] A. Lamikiz,et al. HOLE MAKING USING BALL HELICAL MILLING ON TITANIUM ALLOYS , 2012 .
[6] Zhibing Liu,et al. Surface quality evaluation in meso-scale end-milling operation based on fractal theory and the Taguchi method , 2017 .
[7] Evangelos Gogolides,et al. Fractals and device performance variability: The key role of roughness in micro and nanofabrication , 2012 .
[8] Inderdeep Singh,et al. Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study , 2008 .
[9] David K. Aspinwall,et al. Drill geometry and operating effects when cutting small diameter holes in CFRP , 2009 .
[10] Qiang Guo,et al. Development of an ultra‐small micro drill bit for packaging substrates , 2010 .
[11] V. N. Gaitonde,et al. Taguchi optimization in drilling of AISI 316L stainless steel to minimize burr size using multi-performance objective based on membership function , 2008 .
[12] Qiang Guo,et al. Development of a micro drill bit with a high aspect ratio , 2010 .
[13] Xibin Wang,et al. Modeling and optimization of the flute profile of micro-drill , 2017 .
[14] Xibin Wang,et al. Fractal analysis of surface topography in ground monocrystal sapphire , 2015 .
[15] Jane-Lin Wang. Development of new drilling force models for improving drill point geometries. , 1994 .
[16] M. Fiaschi,et al. Experimental optimization of micro-electrical discharge drilling process from the perspective of inner surface enhancement measured by shear-force microscopy , 2014 .
[17] M. Fiaschi,et al. Experimental characterization of the inner surface in micro-drilling of spray holes: A comparison between ultrashort pulsed laser and EDM , 2014 .
[18] Richard E. DeVor,et al. Chisel edge and cutting lip shape optimization for improved twist drill point design , 2005 .
[19] L. K. Lauderbaugh,et al. Analysis of the effects of process parameters on exit burrs in drilling using a combined simulation and experimental approach , 2009 .
[20] Xiaohu Zheng,et al. Research on fixture hole drilling quality of printed circuit board , 2013 .
[21] Kornel Ehmann,et al. Helical micro-drill point design and grinding , 1993 .