Gradient-Based Multi-Component Topology Optimization for Manufacturability

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

[1]  Ernie Appleton,et al.  Product Design for Manufacture and Assembly , 2008 .

[2]  Yi Min Xie,et al.  Evolutionary structural optimization for connection topology design of multi‐component systems , 2001 .

[3]  L. H. Olesen,et al.  A high‐level programming‐language implementation of topology optimization applied to steady‐state Navier–Stokes flow , 2004, physics/0410086.

[4]  G. K. Ananthasuresh,et al.  Optimal Embedding of Rigid Objects in the Topology Design of Structures , 2004 .

[5]  T. W. Clyne,et al.  An Introduction to Composite Materials: Fabrication , 1996 .

[6]  Glaucio H. Paulino,et al.  Multi-material topology optimization with multiple volume constraints: a general approach applied to ground structures with material nonlinearity , 2017, Structural and Multidisciplinary Optimization.

[7]  Akira Todoroki,et al.  Permutation genetic algorithm for stacking sequence design of composite laminates , 2000 .

[8]  Ole Sigmund,et al.  Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection , 2015, ArXiv.

[9]  Takayuki Yamada,et al.  Manufacturability evaluation for molded parts using fictitious physical models, and its application in topology optimization , 2017 .

[10]  C. Y. Kiyono,et al.  A novel fiber optimization method based on normal distribution function with continuously varying fiber path , 2017 .

[11]  G. Cheng,et al.  An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures , 2015 .

[12]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[13]  O. Sigmund.  Morphology-based black and white filters for topology optimization , 2007 .

[14]  P. Hajela,et al.  Genetic algorithms in truss topological optimization , 1995 .

[15]  Joaquim R. R. A. Martins,et al.  A laminate parametrization technique for discrete ply-angle problems with manufacturing constraints , 2013 .

[16]  C. Chan,et al.  Determination of the minimum bounding box of an arbitrary solid: an iterative approach , 2001 .

[17]  Liang Gao,et al.  A level set method for topological shape optimization of 3D structures with extrusion constraints , 2015 .

[18]  Hesham A. Hegazi,et al.  Multi-objective topology optimization of multi-component continuum structures via a Kriging-interpolated level set approach , 2015 .

[19]  S. Yamasaki,et al.  Heaviside projection based topology optimization by a PDE-filtered scalar function , 2011 .

[20]  Grégoire Allaire,et al.  Molding Direction Constraints in Structural Optimization via a Level-Set Method , 2016 .

[21]  Kazuhiro Saitou,et al.  DECOMPOSITION-BASED ASSEMBLY SYNTHESIS BASED ON STRUCTURAL CONSIDERATIONS , 2002 .

[22]  Matthijs Langelaar,et al.  An additive manufacturing filter for topology optimization of print-ready designs , 2016, Structural and Multidisciplinary Optimization.

[23]  Cetin Batur Dilgen,et al.  Topology Optimization of Turbulent Flows , 2018 .

[24]  Kazuhiro Saitou,et al.  Topology Optimization of Multicomponent Beam Structure via Decomposition-Based Assembly Synthesis , 2005 .

[25]  J. Sethian,et al.  Structural Boundary Design via Level Set and Immersed Interface Methods , 2000 .

[26]  Xiaoming Wang,et al.  Color level sets: a multi-phase method for structural topology optimization with multiple materials , 2004 .

[27]  Erik Lund,et al.  Discrete material optimization of general composite shell structures , 2005 .

[28]  B. Bourdin.  Filters in topology optimization , 2001 .

[29]  Ercan M. Dede,et al.  Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink , 2015 .

[30]  K. Saitou,et al.  Multi-material topology optimization using ordered SIMP interpolation , 2016, Structural and Multidisciplinary Optimization.

[31]  Anders Clausen,et al.  Minimum Compliance Topology Optimization of Shell-Infill Composites for Additive Manufacturing , 2017 .

[32]  G. Allaire,et al.  Structural optimization using sensitivity analysis and a level-set method , 2004 .

[33]  Xu Guo,et al.  Doing Topology Optimization Explicitly and Geometrically—A New Moving Morphable Components Based Framework , 2014 .

[34]  Weihong Zhang,et al.  Simultaneous design of components layout and supporting structures using coupled shape and topology optimization technique , 2008 .

[35]  Glaucio H. Paulino,et al.  Bridging topology optimization and additive manufacturing , 2015, Structural and Multidisciplinary Optimization.

[36]  Tong Gao,et al.  A bi‐value coding parameterization scheme for the discrete optimal orientation design of the composite laminate , 2012 .

[37]  Y. Xie,et al.  A simple evolutionary procedure for structural optimization , 1993 .

[38]  Xiaoming Wang,et al.  A level set method for structural topology optimization , 2003 .

[39]  N. Olhoff,et al.  An investigation concerning optimal design of solid elastic plates , 1981 .

[40]  M. Zhou,et al.  PROGRESS IN TOPOLOGY OPTIMIZATION WITH MANUFACTURING CONSTRAINTS , 2002 .

[41]  Jihong Zhu,et al.  An improved adaptive constraint aggregation for integrated layout and topology optimization , 2015 .

[42]  Michaël Bruyneel,et al.  Composite structures optimization using sequential convex programming , 2000 .

[43]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[44]  A. M. Driessen,et al.  Overhang constraint in topology optimisation for additive manufacturing: a density gradient based approach , 2016 .

[45]  Kazuhiro Saitou,et al.  Topology Synthesis of Multicomponent Structural Assemblies in Continuum Domains , 2011 .

[46]  O. Sigmund,et al.  Multiphase composites with extremal bulk modulus , 2000 .

[47]  G. Buttazzo,et al.  An optimal design problem with perimeter penalization , 1993 .

[48]  O. Sigmund,et al.  Filters in topology optimization based on Helmholtz‐type differential equations , 2011 .

[49]  M. Zhou,et al.  Generalized shape optimization without homogenization , 1992 .

[50]  Wojciech Matusik,et al.  Chopper: partitioning models into 3D-printable parts , 2012, ACM Trans. Graph..

[51]  Yongsheng Ma,et al.  A new multi-material level set topology optimization method with the length scale control capability , 2018 .

[52]  Julián A. Norato,et al.  A geometry projection method for the topology optimization of plate structures , 2016 .

[53]  Sariel Har-Peled,et al.  Efficiently approximating the minimum-volume bounding box of a point set in three dimensions , 1999, SODA '99.

[54]  C. S. Jog,et al.  A new approach to variable-topology shape design using a constraint on perimeter , 1996 .

[55]  Hae Chang Gea,et al.  Structural configuration examples of an integrated optimal design process , 1994, DAC 1994.

[56]  Z. Kang,et al.  Multi-material topology optimization considering interface behavior via XFEM and level set method , 2016 .

[57]  Piotr Breitkopf,et al.  An implicit model for the integrated optimization of component layout and structure topology , 2013 .

[58]  T. E. Bruns,et al.  Topology optimization of non-linear elastic structures and compliant mechanisms , 2001 .

[59]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[60]  Zhan Kang,et al.  Topological design of compliant smart structures with embedded movable actuators , 2014 .

[61]  D. E. Malen,et al.  Fundamentals of Automobile Body Structure Design , 2011 .

[62]  Krishnan Suresh,et al.  Support structure constrained topology optimization for additive manufacturing , 2016, Comput. Aided Des..

[63]  R. Haftka,et al.  Elements of Structural Optimization , 1984 .

[64]  James K. Guest,et al.  Topology Optimization for Additive Manufacturing: New Projection-based Design Algorithms , 2016 .

[65]  H. Chickermane,et al.  Design of multi-component structural systems for optimal layout topology and joint locations , 1997, Engineering with Computers.

[66]  Tao Jiang,et al.  A Systems Approach to Structural Topology Optimization: Designing Optimal Connections , 1997 .

[67]  O. Sigmund,et al.  Rapid prototyping of nanotube-based devices using topology-optimized microgrippers , 2008, Nanotechnology.

[68]  Kazuhiro Saitou,et al.  Decomposition-Based Assembly Synthesis of a Three-Dimensional Body-in-White Model for Structural Stiffness , 2005 .

[69]  Shutian Liu,et al.  Topology optimization design of cast parts based on virtual temperature method , 2018, Comput. Aided Des..

[70]  Shutian Liu,et al.  Structural topology optimization considering connectivity constraint , 2016, Structural and Multidisciplinary Optimization.

[71]  N. Kikuchi,et al.  General topology optimization method with continuous and discrete orientation design using isoparametric projection , 2015 .

[72]  Matthijs Langelaar,et al.  Topology optimization of 3D self-supporting structures for additive manufacturing , 2016 .

[73]  O. Sigmund,et al.  Checkerboard patterns in layout optimization , 1995 .

[74]  Jan Sokolowski,et al.  On the Topological Derivative in Shape Optimization , 1999 .

[75]  K. Saitou,et al.  Topology optimization of composite structures with data-driven resin filling time manufacturing constraint , 2017 .

[76]  Qi Xia,et al.  A level set based method for the optimization of cast part , 2010 .

[77]  Yongsheng Ma,et al.  A survey of manufacturing oriented topology optimization methods , 2016, Adv. Eng. Softw..

[78]  Julián A. Norato,et al.  Stress-based topology optimization with discrete geometric components , 2017 .

[79]  Weihong Zhang,et al.  Integrated layout design of multi‐component system , 2009 .

[80]  Erik Lund,et al.  Material interpolation schemes for unified topology and multi-material optimization , 2011 .

[81]  Boyan Stefanov Lazarov,et al.  Topology optimization using PETSc: An easy-to-use, fully parallel, open source topology optimization framework , 2015 .

[82]  Z. Kang,et al.  Structural topology optimization with minimum distance control of multiphase embedded components by level set method , 2016 .

[83]  Glaucio H. Paulino,et al.  Topology optimization with manufacturing constraints: A unified projection-based approach , 2016, Adv. Eng. Softw..

[84]  Niels Olhoff,et al.  Topology optimization of continuum structures: A review* , 2001 .

[85]  Frithiof I. Niordson,et al.  Optimal design of elastic plates with a constraint on the slope of the thickness function , 1983 .

[86]  Xiaoping Qian,et al.  Undercut and overhang angle control in topology optimization: A density gradient based integral approach , 2017 .

[87]  Noboru Kikuchi,et al.  Simultaneous topology and material microstructure design , 1994 .

[88]  Günter Rote,et al.  Bounds on the quality of the PCA bounding boxes , 2009, Comput. Geom..

[89]  Xiangyang Cui,et al.  Concurrent topological design of composite structures and the underlying multi-phase materials , 2017 .

[90]  J. Petersson,et al.  Slope constrained topology optimization , 1998 .

[91]  Ole Sigmund,et al.  Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures , 2016, IEEE Transactions on Visualization and Computer Graphics.

[92]  Kazuhiro Saitou,et al.  Decomposition-based assembly synthesis for maximum structural strength and modularity , 2004 .

[93]  Joseph O'Rourke,et al.  Finding minimal enclosing boxes , 1985, International Journal of Computer & Information Sciences.

[94]  Ying Liu,et al.  Self-supporting structure design in additive manufacturing through explicit topology optimization , 2017 .

[95]  Kazuhiro Saitou,et al.  Decomposition-Based Assembly Synthesis of Space Frame Structures Using Joint Library , 2006 .

[96]  Gil Ho Yoon,et al.  A newly developed qp-relaxation method for element connectivity parameterization to achieve stress-based topology optimization for geometrically nonlinear structures , 2013 .

[97]  Glaucio H. Paulino,et al.  Application of layout and topology optimization using pattern gradation for the conceptual design of buildings , 2011 .

[98]  Erik Lund,et al.  Discrete material optimization of vibrating laminated composite plates for minimum sound radiation , 2010 .

[99]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[100]  Ole Sigmund,et al.  On the usefulness of non-gradient approaches in topology optimization , 2011 .

[101]  Layne T. Watson,et al.  Improved Genetic Algorithm for the Design of Stiffened Composite Panels , 1994 .

[102]  R. Haftka,et al.  Optimization of laminate stacking sequence for buckling load maximization by genetic algorithm , 1993 .

[103]  Tsuyoshi Nomura,et al.  Structural topology optimization for the design of broadband dielectric resonator antennas using the finite difference time domain technique , 2007 .

[104]  Wojciech Matusik,et al.  Two-Scale Topology Optimization with Microstructures , 2017, ACM Trans. Graph..

[105]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[106]  Erik Lund,et al.  DMTO – a method for Discrete Material and Thickness Optimization of laminated composite structures , 2014 .

[107]  Ramana V. Grandhi,et al.  A survey of structural and multidisciplinary continuum topology optimization: post 2000 , 2014 .

[108]  Marco Attene,et al.  Shapes In a Box: Disassembling 3D Objects for Efficient Packing and Fabrication , 2015, Comput. Graph. Forum.

[109]  M. Zhou,et al.  Checkerboard and minimum member size control in topology optimization , 2001 .

[110]  Kazuhiro Saitou,et al.  Genetic algorithms as an approach to configuration and topology design , 1994, DAC 1993.

[111]  D. Gossard,et al.  Synthesis of Optimal Shape and Topology of Structures , 1996 .

[112]  James K. Guest,et al.  Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through design , 2016 .

[113]  George I. N. Rozvany,et al.  A critical review of established methods of structural topology optimization , 2009 .

[114]  Kazuhiro Saitou,et al.  Decomposition-Based Assembly Synthesis for Structural Stiffness , 2003 .

[115]  Michaël Bruyneel,et al.  SFP—a new parameterization based on shape functions for optimal material selection: application to conventional composite plies , 2011 .

[116]  Erik Lund,et al.  Optimization formulations for the maximum nonlinear buckling load of composite structures , 2011 .

[117]  Glaucio H. Paulino,et al.  Toward GPU accelerated topology optimization on unstructured meshes , 2013, Structural and Multidisciplinary Optimization.