A novel approach of mechanical chemical grinding

[1]  W. Weber,et al.  Incorporation and stability of carbon during low-temperature epitaxial growth of Ge1−xCx (x<0.1) alloys on Si(100): Microstructural and Raman studies , 1997 .

[2]  F. Ebrahimi,et al.  Fracture anisotropy in silicon single crystal , 1999 .

[3]  Tetsuya Hoshino,et al.  Mechanism of polishing of SiO2 films by CeO2 particles , 2001 .

[4]  P. V. Rao,et al.  Selection of optimum conditions for maximum material removal rate with surface finish and damage as constraints in SiC grinding , 2003 .

[5]  P. Venkateswara Rao,et al.  A new chip-thickness model for performance assessment of silicon carbide grinding , 2004 .

[6]  C. Ballif,et al.  Deformation mechanisms of silicon during nanoscratching , 2005 .

[7]  Michihisa Koyama,et al.  Tight-binding quantum chemical molecular dynamics simulation of mechano-chemical reactions during chemical-mechanical polishing process of SiO2 surface by CeO2 particle , 2005 .

[8]  Libo Zhou,et al.  Defect-free fabrication for single crystal silicon substrate by chemo-mechanical grinding , 2006 .

[9]  Zhong Lin Wang,et al.  Converting Ceria Polyhedral Nanoparticles into Single-Crystal Nanospheres , 2006, Science.

[10]  TEM and HRTEM Observations of Microstructural Change of Silicon Single Crystal Scratched under Very Small Loading Forces by AFM , 2008 .

[11]  Libo Zhou,et al.  Characteristics of silicon substrates fabricated using nanogrinding and chemo-mechanical-grinding , 2008 .

[12]  Jian-wen Wang,et al.  Effect of water quenching and SiO2 addition during vitrification of fly ash Part 1: on the crystalline characteristics of slags. , 2008, Journal of hazardous materials.

[13]  Pengfei Wang,et al.  Effect of ZnO on the interfacial bonding between Na2O–B2O3–SiO2 vitrified bond and diamond , 2009 .

[14]  Saroj P. Dash,et al.  Electrical creation of spin polarization in silicon at room temperature , 2009, Nature.

[15]  Guanglai Tian,et al.  Effect of braking pressure and braking speed on the tribological properties of C/SiC aircraft brake materials , 2010 .

[16]  Shinichi Tojo,et al.  Electron spin coherence exceeding seconds in high-purity silicon. , 2011, Nature materials.

[17]  Shalendra Kumar,et al.  Study of nanocrystalline ceria thin films deposited by e-beam technique , 2011 .

[18]  Shalendra Kumar,et al.  Structural and optical study of samarium doped cerium oxide thin films prepared by electron beam evaporation , 2011 .

[19]  Han Huang,et al.  Grinding of silicon wafers using an ultrafine diamond wheel of a hybrid bond material , 2011 .

[20]  Influence of CeO2 and Sintering Parameters on the Performance of Vitrified Bond Diamond Abrasive , 2012 .

[21]  Fengwei Huo,et al.  Fabrication and size prediction of crystalline nanoparticles of silicon induced by nanogrinding with ultrafine diamond grits , 2012 .

[22]  M. Treacy,et al.  The Local Structure of Amorphous Silicon , 2012, Science.

[23]  Kazuya Ando,et al.  Observation of the inverse spin Hall effect in silicon , 2011, Nature Communications.

[24]  E. Dieguez,et al.  The use of potassium peroxidisulphate and Oxone® as oxidizers for the chemical mechanical polishing of silicon wafers , 2013 .

[25]  Dongming Guo,et al.  A model for nanogrinding based on direct evidence of ground chips of silicon wafers , 2013 .

[26]  S. R. Schofield,et al.  Quantum engineering at the silicon surface using dangling bonds , 2013, Nature Communications.

[27]  Z. Dong,et al.  Design and evaluation of soft abrasive grinding wheels for silicon wafers , 2013 .

[28]  Wenfeng Ding,et al.  Fabrication and performance of porous metal-bonded CBN grinding wheels using alumina bubble particles as pore-forming agents , 2013 .

[29]  Y. Hayakawa,et al.  Effect of rf power on the properties of magnetron sputtered CeO2 thin films , 2015, Journal of Materials Science: Materials in Electronics.

[30]  Laurent Vivien.  Computer technology: Silicon chips lighten up , 2015, Nature.

[31]  N. Hyatt,et al.  Effect of Zn- and Ca-oxides on the structure and chemical durability of simulant alkali borosilicate glasses for immobilisation of UK high level wastes , 2015 .

[32]  R. Kang,et al.  A novel approach of high speed scratching on silicon wafers at nanoscale depths of cut , 2015, Scientific Reports.

[33]  Fakhr e. Alam,et al.  Enhanced thermal conductivity for polyimide composites with a three-dimensional silicon carbide nanowire@graphene sheets filler , 2015 .

[34]  Dongming Guo,et al.  Warping of silicon wafers subjected to back-grinding process , 2015 .

[35]  Bo Wang,et al.  Changes in surface layer of silicon wafers from diamond scratching , 2015 .

[36]  J. Zang,et al.  Inhibiting the oxidation of diamond during preparing the vitrified dental grinding tools by depositing a ZnO coating using direct urea precipitation method. , 2015, Materials science & engineering. C, Materials for biological applications.

[37]  G. Ravi,et al.  The influence of substrate temperature on the optical and micro structural properties of cerium oxide thin films deposited by RF sputtering , 2015 .

[38]  Chao Zhang,et al.  Enhanced electron field emission of Cu implanted microcrystalline diamond films after annealing , 2016 .

[39]  R. Kang,et al.  Nanoscale solely amorphous layer in silicon wafers induced by a newly developed diamond wheel , 2016, Scientific Reports.

[40]  Ping Zhou,et al.  A load identification method for the grinding damage induced stress (GDIS) distribution in silicon wafers , 2016 .

[41]  P. May,et al.  Diamond and Carbon Nanotube Composites for Supercapacitor Devices , 2017, Journal of Electronic Materials.

[42]  A. Khare,et al.  Optical nonlinearity in nanostructured carbon thin films fabricated by pulsed laser deposition technique , 2016 .

[43]  C. V. Singh,et al.  Heterogeneous reduction of carbon dioxide by hydride-terminated silicon nanocrystals , 2016, Nature Communications.

[44]  Song Ma,et al.  Synthesis and characterization of boron doped diamond/β-SiC composite films , 2017 .

[45]  Y. Zang,et al.  Si/SiC heterojunction prepared by metal induced crystallization of amorphous silicon , 2017 .

[46]  Synthesis and characterization of boron doped diamond/.BETA.-SiC composite films , 2017 .

[47]  Tao Yang,et al.  Comparison of rare earth oxides on properties of vitrified diamond composites , 2017 .

[48]  L. Kavan,et al.  Fabrication of porous boron-doped diamond on SiO2 fiber templates , 2017 .

[49]  M. Koleini,et al.  Indications of chemical bond contrast in AFM images of a hydrogen-terminated silicon surface , 2017, Nature Communications.

[50]  Jiwang Yan,et al.  Atomic-scale characterization of subsurface damage and structural changes of single-crystal silicon carbide subjected to electrical discharge machining , 2017 .

[51]  P. Puech,et al.  Advanced spectroscopic analyses on a: C-H materials: Revisiting the EELS characterization and its coupling with multi-wavelength Raman spectroscopy , 2017 .

[52]  S. Kukushkin,et al.  Nanoindentation of GaN/SiC thin films on silicon substrate , 2017 .

[53]  Tianyu Yu,et al.  Influence of grain wear on material removal behavior during grinding nickel-based superalloy with a single diamond grain , 2017 .

[54]  T. Jacob,et al.  Influence of grain boundaries on elasticity and thermal conductivity of nanocrystalline diamond films , 2017 .