Finite element modelling of composite structures under crushing load

Abstract This paper details the theory and implementation of a composite damage model, addressing damage within a ply (intralaminar) and delamination (interlaminar), for the simulation of crushing of laminated composite structures. It includes a more accurate determination of the characteristic length to achieve mesh objectivity in capturing intralaminar damage consisting of matrix cracking and fibre failure, a load-history dependent material response, an isotropic hardening nonlinear matrix response, as well as a more physically-based interactive matrix-dominated damage mechanism. The developed damage model requires a set of material parameters obtained from a combination of standard and non-standard material characterisation tests. The fidelity of the model mitigates the need to manipulate, or “calibrate”, the input data to achieve good agreement with experimental results. The intralaminar damage model was implemented as a VUMAT subroutine, and used in conjunction with an existing interlaminar damage model, in Abaqus/Explicit. This approach was validated through the simulation of the crushing of a cross-ply composite tube with a tulip-shaped trigger, loaded in uniaxial compression. Despite the complexity of the chosen geometry, excellent correlation was achieved with experimental results.

[1]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[2]  Brian Falzon,et al.  Numerical analysis of intralaminar failure mechanisms in composite structures, Part I: FE implementation , 2011 .

[3]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[4]  H. Schürmann,et al.  FAILURE ANALYSIS OF FRP LAMINATES BY MEANS OF PHYSICALLY BASED PHENOMENOLOGICAL MODELS , 1998 .

[5]  William H. Press,et al.  Numerical recipes in FORTRAN (2nd ed.): the art of scientific computing , 1992 .

[6]  Xinwei Wang,et al.  On a new crush trigger for energy absorption of composite tubes , 2010 .

[7]  Response of pultruded composite tubes subjected to dynamic and impulsive axial loading , 2013 .

[8]  Lorenzo Iannucci,et al.  Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development , 2006 .

[9]  Janina Decker,et al.  Inelastic Analysis Of Structures , 2016 .

[10]  Jean-Louis Chaboche,et al.  CONTINUUM DAMAGE MECHANICS :PRESENT STATE AND FUTURE TRENDS , 1987 .

[11]  William H. Press,et al.  Numerical Recipes: FORTRAN , 1988 .

[12]  C. Bisagni.  Experimental investigation of the collapse modes and energy absorption characteristics of composite tubes , 2009 .

[13]  Gary L. Farley,et al.  Energy Absorption of Composite Materials , 1983 .

[14]  M. A. McCarthy,et al.  Numerical investigation of a crash test of a composite helicopter subfloor structure , 2001 .

[15]  Paolo Feraboli,et al.  Development of a Corrugated Test Specimen for Composite Materials Energy Absorption , 2008 .

[16]  Daniel O. Adams,et al.  Test Methods for Composites Crashworthiness : A Review , 2008 .

[17]  Brian Falzon,et al.  Numerical analysis of intralaminar failure mechanisms in composite structures, Part II: Applications , 2011 .

[18]  Pierre Ladevèze,et al.  Damage modelling of the elementary ply for laminated composites , 1992 .

[19]  Quanshui Zheng,et al.  Observation of microscale superlubricity in graphite. , 2012, Physical review letters.

[20]  Brian Falzon,et al.  A progressive failure model for composite laminates subjected to low velocity impact damage , 2008 .

[21]  Z. Bažant,et al.  Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories , 1993 .

[22]  Chiara Bisagni,et al.  Progressive crushing of fiber-reinforced composite structural components of a Formula One racing car , 2005 .

[23]  Robert L. Taylor,et al.  A constitutive model for anisotropic damage in fiber-composites , 1995 .

[24]  Jinyang Zheng,et al.  Recent developments on damage modeling and finite element analysis for composite laminates: A review , 2010 .

[25]  Homayoun Hadavinia,et al.  Experimental studies on fracture characterisation and energy absorption of GFRP composite box structures , 2009 .

[26]  Lorenzo Iannucci,et al.  Fracture toughness of the tensile and compressive fibre failure modes in laminated composites , 2006 .

[27]  J. Oliver.  A consistent characteristic length for smeared cracking models , 1989 .

[28]  J. Xavier,et al.  High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in transverse compression and in-plane shear using digital image correlation , 2010 .

[29]  J. M. Starbuck,et al.  Energy Absorption in Polymer Composites for Automotive Crashworthiness , 2002 .

[30]  Kyle C. Indermuehle,et al.  Numerical simulation of the crushing process of a corrugated composite plate , 2011 .

[31]  Ramesh Talreja,et al.  Stiffness properties of composite laminates with matrix cracking and interior delamination , 1986 .

[32]  P. Camanho,et al.  Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .

[33]  F. Chang,et al.  A Progressive Damage Model for Laminated Composites Containing Stress Concentrations , 1987 .

[34]  R. E. Link,et al.  Round-robin Analysis of Standard Data Sets for Fracture Toughness Evaluation in ASTM E1820 , 2015 .

[35]  Constantinos Soutis,et al.  Modelling damage evolution in composite laminates subjected to low velocity impact , 2012 .

[36]  S. Pinho,et al.  Combining damage and friction to model compressive damage growth in fibre-reinforced composites , 2015 .

[37]  M Mohite Preetamkumar,et al.  Validation of Intralaminar Behaviour of the Laminated Composites by Damage Mesomodel , 2009 .

[38]  P. Camanho,et al.  High strain rate characterisation of unidirectional carbon-epoxy IM7-8552 in longitudinal compression , 2011 .

[39]  P. H. Thornton,et al.  Energy Absorption in Composite Structures , 1979 .

[40]  Mostafa Rassaian,et al.  LS-DYNA MAT54 modeling of the axial crushing of a composite tape sinusoidal specimen , 2011 .

[41]  Lorenzo Iannucci,et al.  A progressive failure model for mesh-size-independent FE analysis of composite laminates subject to low-velocity impact damage , 2012 .

[42]  Mostafa Rassaian,et al.  Crush energy absorption of composite channel section specimens , 2009 .

[43]  Saijod T. W. Lau,et al.  On the effect of geometrical designs and failure modes in composite axial crushing: A literature review , 2012 .

[44]  Andrew J. Gunnion,et al.  Investigation into laminate design of open carbon–fibre/epoxy sections by quasi–static and dynamic crushing , 2011 .

[45]  Ramesh Talreja,et al.  A continuum mechanics characterization of damage in composite materials , 1985, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[47]  Alastair Johnson,et al.  Failure Mechanisms and Energy Absorption in Composite Elements under Axial Crush , 2011 .

[48]  R. S. Thomson,et al.  Experimental and numerical investigation of the crushing response of an open section composite energy absorbing element , 2011 .

[49]  Ramesh Talreja,et al.  Damage mechanics of composite materials , 1994 .

[50]  Wim Van Paepegem,et al.  Crushing and energy absorption performance of different geometrical shapes of small-scale glass/polyester composite tubes under quasi-static loading conditions , 2011 .

[51]  Karen,et al.  Deployable System for Crash-Load Attenuation , 2007 .

[52]  Pedro P. Camanho,et al.  Prediction of in situ strengths and matrix cracking in composites under transverse tension and in-plane shear , 2006 .

[53]  W. Van Paepegem,et al.  Monitoring quasi-static and cyclic fatigue damage in fibre-reinforced plastics by Poisson's ratio evolution , 2010 .

[54]  S. Hawkins,et al.  An investigation of Mode I and Mode II fracture toughness enhancement using aligned carbon nanotubes forests at the crack interface , 2013 .

[55]  Zdeněk P. Bažant,et al.  Mechanics of solid materials , 1992 .

[56]  Brian Falzon,et al.  Predicting low-velocity impact damage on a stiffened composite panel , 2010 .

[57]  Constantinos Soutis,et al.  Damage monitoring and analysis of composite laminates with an open hole and adhesively bonded repairs using digital image correlation , 2013 .

[58]  Francis Collombet,et al.  Mechanical Characterization of an Alternative Technique to Embed Sensors in Composite Structures: The Monitoring Patch , 2011, Applied Composite Materials.