Development of thin‐film Cu(In,Ga)Se2 and CdTe solar cells

Cu(In,Ga)Se2 and CdTe heterojunction solar cells grown on rigid (glass) or flexible foil substrates require p‐type absorber layers of optimum optoelectronic properties and n‐type wide‐bandgap partner layers to form the p–n junction. Transparent conducting oxide and specific metal layers are used for front and back electrical contacts. Efficiencies of solar cells depend on various deposition methods as they control the optoelectronic properties of the layers and interfaces. Certain treatments, such as addition of Na in Cu(In,Ga)Se2 and CdCl2 treatment of CdTe have a direct influence on the electronic properties of the absorber layers and efficiency of solar cells. Processes for the development of superstrate and substrate solar cells are reviewed. Copyright © 2004 John Wiley & Sons, Ltd.

[1]  V. Alberts.  Comparison of Material Properties of CuInSe2 Films Produced by Reaction of Metallic Alloys to H2Se/Ar and Elemental Se Vapour , 2002 .

[2]  H. Zogg,et al.  Structural and Chemical Studies on CdTe/CdS Thin Film Solar Cells with Analytical Transmission Electron Microscopy. , 2002 .

[3]  J. Parisi,et al.  Light induced changes in the electrical behavior of CdTe and Cu(In,Ga)Se2 solar cells , 2002 .

[4]  D. Schmid,et al.  Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin films , 1996 .

[5]  Su-Huai Wei,et al.  First‐Principles Study of Doping Limits of CdTe , 2002 .

[6]  C. Guillén,et al.  Structure, morphology and photoelectrochemical activity of CuInSe2 thin films as determined by the characteristics of evaporated metallic precursors , 2002 .

[7]  P. J. Sebastian,et al.  Development of CdTe thin films on flexible substrates—a review , 2003 .

[8]  D. Lincot,et al.  Mechanism of Chemical Bath Deposition of Cadmium Sulfide Thin Films in the Ammonia‐Thiourea System In Situ Kinetic Study and Modelization , 1993 .

[9]  H. Schock,et al.  The impact of controlled sodium incorporation on rapid thermal processed Cu(InGa)Se/sub 2/-thin films and devices , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[10]  A. Rothwarf.  A p-i-n heterojunction model for the thin-film CuInSe2/CdS solar cell , 1982, IEEE Transactions on Electron Devices.

[11]  T. Negami,et al.  CuInS2 thin-films solar cells fabricated by sulfurization of oxide precursors , 1997 .

[12]  A. Hermann,et al.  High efficiency polycrystalline Cu(In,Ga)Se2‐based solar cells , 1994 .

[13]  U. Rau,et al.  Electronic properties of ZnO/CdS/Cu(In,Ga)Se2 solar cells — aspects of heterojunction formation , 2001 .

[14]  M. Contreras,et al.  High efficiency thin-film Cu(In,Ga)Se/sub 2/-based photovoltaic devices: progress towards a universal approach to absorber fabrication , 1993, Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference - 1993 (Cat. No.93CH3283-9).

[15]  V. Alberts,et al.  Preparation of CulnSe2 thin films by rapid thermal processing of Se-containing precursors , 2000 .

[16]  A. Brinkman,et al.  The effect of the transparent conductive oxide on the performance of thin film CdS/CdTe solar cells , 2000 .

[17]  H. Schock,et al.  Sequential deposition of Cu(In,Ga)(S,Se)/sub 2/ , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[18]  G. S. Oleinuk,et al.  Liquidus surface of the ternary system CdCl/sub 2/-CdS-CdTe , 1986 .

[19]  Dieter Bonnet,et al.  THE CdTe THIN FILM SOLAR CELL - AN OVERVIEW , 1992 .

[20]  J. Granata,et al.  Blue-photon modification of nonstandard diode barrier in CuInSe2 solar cells , 1998 .

[21]  M. Konagai,et al.  Comprehensive Study of Light-Soaking Effect in ZnO/Cu(InGa)Se 2 Solar Cells with Zn-Based Buffer Layers , 2001 .

[22]  D. Bonnet,et al.  Grain boundaries and impurities in CdTe/CdS solar cells , 2002 .

[23]  T. Nakada,et al.  CuInSe2-based solar cells by Se-vapor selenization from Se-containing precursors , 1994 .

[24]  A. Rockett,et al.  Sodium in Sputtered Mo Back Contacts for Cu(In,Ga)Se2 Devices: Incorporation, Diffusion and Relationship to Oxygen , 1997 .

[25]  M. Döbeli,et al.  Stability aspects in CdTe/CdS solar cells , 2004 .

[26]  T. Barge,et al.  Effect of oxygen on thin-film CdS/CdTe solar cells , 1984 .

[27]  David Cahen,et al.  Stability of CdTe/CdS thin-film solar cells , 2000 .

[28]  A. Zunger,et al.  First-principles calculation of band offsets, optical bowings, and defects in CdS, CdSe, CdTe, and their alloys , 2000 .

[29]  Role of buffer layers in CIS-based solar cells , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[30]  R. Würz,et al.  Formation of an interfacial MoSe2 layer in CVD grown CuGaSe2 based thin film solar cells , 2003 .

[31]  S. Nishiwaki,et al.  Preparation of Cu(In,Ga)Se_2 thin films at low substrate temperatures , 2001 .

[32]  Jürgen H. Werner,et al.  Alternative back contact materials for thin film Cu(In,Ga)Se2 solar cells , 2003 .

[33]  H. Zogg,et al.  12.8% Efficiency Cu(In,Ga)Se2 solar cell on a flexible polymer sheet , 1999 .

[34]  G. Hodes.  Chemical Solution Deposition Of Semiconductor Films , 2002 .

[35]  J. Sites,et al.  15.4% CuIn1−xGaxSe2-based photovoltaic cells from solution-based precursor films , 2000 .

[36]  Influence of Na on the electro-optical properties of Cu(In,Ga)Se/sub 2/ , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[37]  D. Lincot,et al.  Atomic layer deposition of zinc oxide and indium sulfide layers for Cu(In,Ga)Se2 thin-film solar cells , 2001 .

[38]  H. Muffler,et al.  High efficiency chalcopyrite solar cells with ILGAR-ZnO WEL-device characteristics subject to the WEL composition , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[39]  Shinzo Takata,et al.  Group III Impurity Doped Zinc Oxide Thin Films Prepared by RF Magnetron Sputtering , 1985 .

[40]  D. Lincot,et al.  CD-free Cu(In,Ga)Se2 thin-film solar modules with In2S3 buffer layer by ALCVD , 2003 .

[41]  Sijin Han,et al.  Cadmium Telluride Solar Cells on Molybdenum Substrates , 2001 .

[42]  S. Shimakawa,et al.  Cd free CIGS solar cells fabricated by dry processes , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[43]  D. Schmid,et al.  Influence of substrates on the electrical properties of Cu(In,Ga)Se/sub 2/ thin films , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[44]  Franz Karg,et al.  Development and manufacturing of CIS thin film solar modules , 2001 .

[45]  Yoshiaki Tanaka,et al.  Yield issues on the fabrication of 30cm×30cm-sized Cu(In,Ga)Se-based thin-film modules , 2003 .

[46]  R. Birkmire,et al.  Interdiffusion of CdS/CdTe thin films: Modeling x-ray diffraction line profiles , 2001 .

[47]  R. Wendt,et al.  Improvement of CdTe solar cell performance with discharge control during film deposition by magnetron sputtering , 1998 .

[48]  A. Zunger,et al.  Theoretical and experimental studies of the ZnSe/CuInSe2 heterojunction band offset , 1993 .

[49]  R. Reedy,et al.  Sodium diffusion, selenization, and microstructural effects associated with various molybdenum back contact layers for CIS-based solar cells , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[50]  Hans Zogg,et al.  Flexible CdTe solar cells on polymer films , 2001 .

[51]  M. Konagai,et al.  Characterization of ZnInxSey Thin Films as a Buffer Layer for High Efficiency Cu(InGa)Se2 Thin-Film Solar Cells , 1998 .

[52]  David Cahen,et al.  Effects of Sodium on Polycrystalline Cu(In,Ga)Se2 and Its Solar Cell Performance , 1998 .

[53]  A. Zunger,et al.  Effects of Na on the electrical and structural properties of CuInSe2 , 1999 .

[54]  A. Rohatgi.  A STUDY OF EFFICIENCY LIMITING DEFECTS IN POLYCRYSTALLINE CdTe/CdS SOLAR CELLS , 1992 .

[55]  T. Nakada,et al.  18% Efficiency Cd-Free Cu(In, Ga)Se2 Thin-Film Solar Cells Fabricated Using Chemical Bath Deposition (CBD)-ZnS Buffer Layers , 2002 .

[56]  F. Karg,et al.  Novel rapid-thermal-processing for CIS thin-film solar cells , 1993, Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference - 1993 (Cat. No.93CH3283-9).

[57]  D. Lincot,et al.  Copper indium diselenide solar cells prepared by electrodeposition , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[58]  N. Kohara,et al.  Chemical and Structural Characterization of Cu(In,Ga)Se2/Mo Interface in Cu(In,Ga)Se2 Solar Cells , 1996 .

[59]  T. Nakada,et al.  Superstrate-type CuInSe/sub 2/ solar cells with chemically deposited CdS window layers , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[60]  H. Zogg,et al.  Characterization of CuGaxSey/ZnO for superstrate solar cells , 2000 .

[61]  A. Rockett,et al.  Electronic effects of sodium in epitaxial CuIn1−xGaxSe2 , 1997 .

[62]  A. Yamada,et al.  Doping and intermixing in CdS/CdTe solar cells fabricated under different conditions , 2001 .

[63]  T. Nakada,et al.  Photoluminescence Properties of Sodium Incorporated in CuInSe2 Thin Films , 1999 .

[64]  J. C. Mikkelsen,et al.  Ternary phase relations of the chalcopyrite compound CuGaSe2 , 1981 .

[65]  C. Ferekides,et al.  RF sputtered back contacts for CdTe/CdS thin film solar cells , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[66]  Sungtae Kim,et al.  CuInSe2 phase formation during Cu2Se/In2Se3 interdiffusion reaction , 2000 .

[67]  Jae-Shin Lee,et al.  Effects of junction formation conditions on the photovoltaic properties of sintered CdS/CdTe solar cells , 1986 .

[68]  M. Fisher,et al.  Nanoparticle Oxides Precursor Inks for Thin film Copper Indium Gallium Selenide (CIGS) Solar Cells , 2001 .

[69]  H. Zogg,et al.  DEVELOPMENT OF HIGH EFFICIENCY FLEXIBLE CdTe SOLAR CELLS , 2002 .

[70]  H. Zogg,et al.  Ga2O3 segregation in Cu(In, Ga)Se2/ZnO superstrate solar cells and its impact on their photovoltaic properties , 2002 .

[71]  T. Negami,et al.  Use of diethylselenide as a less-hazardous source for preparation of CuInSe2 photo-absorbers by selenization of metal precursors , 2002 .

[72]  C. Eberspacher,et al.  Thin-film CIS alloy PV materials fabricated using non-vacuum, particles-based techniques , 2001 .

[73]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[74]  Y. Nishiyama,et al.  CdS/CdTe solar cells by the screen-printing-sintering technique , 1990, IEEE Conference on Photovoltaic Specialists.

[75]  R. Klenk,et al.  A model for the successful growth of polycrystalline films of CuInSe2 by multisource physical vacuum evaporation , 1993 .

[76]  P. Russell,et al.  Metal contacts to CuInSe2 , 1984 .

[77]  K. Granath,et al.  The effect of NaF on Cu(In, Ga)Se2 thin film solar cells , 2000 .

[78]  M. Contreras,et al.  Fundamental thermodynamics and experiments in fabricating high efficiency CuInSe2 solar cells by selenization without the use of H2Se , 1992 .

[79]  L. Kazmerski,et al.  Studies of the micro‐ and nanostructure of polycrystalline CdTe and CuInSe2 using atomic force and scanning tunneling microscopy , 1995 .

[80]  Marc Burgelman,et al.  A theoretical model for the front region of cadmium telluride solar cells , 2003 .

[81]  A. Ennaoui,et al.  High-efficiency Cd-free CIGSS thin-film solar cells with solution grown zinc compound buffer layers , 2001 .

[82]  M. Beck,et al.  Reproducibility studies on thin-film copper indium diselenide prepared from copper indium oxide , 1997 .

[83]  D. Dunlavy,et al.  Studies of ZnTe back contacts to CdS/CdTe solar cells , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[84]  T. Nakada.  Improved compositional flexibility of Cu(In,Ga)Se2-based thin film solar cells by sodium control technique , 1997 .

[85]  T. Nakada,et al.  Band offset of high efficiency CBD-ZnS/CIGS thin film solar cells , 2003 .

[86]  H. Zogg,et al.  Comparison of structural and electrical properties of Cu(In, Ga)Se2 for substrate and superstrate solar cells , 2002 .

[87]  H. Dittrich,et al.  Structure and morphology of evaporated bilayer and selenized CuInSe/sub 2/ films , 1988, Conference Record of the Twentieth IEEE Photovoltaic Specialists Conference.

[88]  S. Romani,et al.  Sulphur diffusion in CdTe and the phase diagram of the CdS–CdTe pseudo-binary alloy , 1999 .

[89]  ON THE ROLE OF Na AND MODIFICATIONS TO Cu ( ln , Ga ) Se , ABSORBER MATERIALS USING THIN-MF : ( M = Na , K , Cs ) PRECURSOR LAYERS , 1997 .

[90]  D. Bonnet,et al.  Dependence of CdS/CdTe thin film solar cell characteristics on the processing conditions , 1996 .

[91]  R. Birkmire,et al.  Reaction analysis of the formation of CuInSe2 films in a physical vapor deposition reactor , 1998 .

[92]  J. Tang,et al.  Properties of ZnTe:Cu thin films and CdS/CdTe/ZnTe solar cells , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[93]  D. Schmid,et al.  A comprehensive characterization of the interfaces in Mo/CIS/CdS/ZnO solar cell structures , 1994, Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).

[94]  K. Ohata,et al.  Phase Diagram of the CdS-CdTe Pseudobinary System , 1973 .

[95]  T. Nakada,et al.  Improved Jsc in CIGS thin film solar cells using a transparent conducting ZnO:B window layer , 2001 .

[96]  D. Lane,et al.  Structural dynamics in CdS–CdTe thin films , 2000 .

[97]  H. Matsushita,et al.  Phase diagrams of the (Cu2Se, CuSe)–CuGaSe2 system and the crystal growth of CuGaSe2 by the solution method , 1998 .

[98]  I. Spînulescu-Carnaru.  Growth of Hexagonal Crystallites in CdTe Thin Films , 1966, 1966.

[99]  U. Rau,et al.  Persistent photoconductivity in Cu(In,Ga)Se2 heterojunctions and thin films prepared by sequential deposition , 1998 .

[100]  M. Al‐Jassim,et al.  Phases, morphology, and diffusion in CuInxGa1−xSe2 thin films , 1997 .

[101]  V. Mikli,et al.  Composition of CuInS2 thin films prepared by spray pyrolysis , 2002 .

[102]  David W. Niles,et al.  Direct observation of Na and O impurities at grain surfaces of CuInSe2 thin films , 1999 .

[103]  A. Tiwari,et al.  Analysis of Bulk and Interface Phenomena in CdTe/CdS Thin-Film Solar Cells , 2004 .

[104]  P. Meyers,et al.  Cadmium-telluride—Material for thin film solar cells , 1998 .

[105]  Rommel Noufi,et al.  Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin‐film solar cells , 2003 .

[106]  D. Levi,et al.  The role of oxygen in CdS/CdTe solar cells deposited by close-spaced sublimation , 1996, Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996.

[107]  M. Lux‐Steiner,et al.  Defects in CuGaSe2 thin films grown by MOCVD , 2000 .

[108]  K. Zanio,et al.  Semiconductors and Semimetals Volume 13 Cadmium Telluride , 1978 .

[109]  H. Zogg,et al.  Influence of Transparent Conducting Oxides on the Properties of CdTe/CdS Solar Cells , 1998 .

[110]  M. Lux‐Steiner,et al.  Cd-free buffer layers for CIGS solar cells prepared by a dry process , 2002 .

[111]  M. Burgelman,et al.  Effects of the Au/CdTe back contact on IV and CV characteristics of Au/CdTe/CdS/TCO solar cells. , 1997 .

[112]  Thermochemical and Kinetic Aspects of Cadmium Telluride Solar Cell Processing , 2001 .

[113]  H. Zogg,et al.  Effects of NaF coevaporation on structural properties of Cu(In, Ga)Se2 thin films , 2003 .

[114]  M. Powalla,et al.  Sodium co-evaporation for low temperature Cu(In,Ga)Se2 deposition , 2001 .

[115]  A. Compaan,et al.  14% CdS/CdTe Thin Film Cells with ZnO:Al TCO , 2003 .

[116]  J. Fulghum,et al.  Na impurity chemistry in photovoltaic CIGS thin films: Investigation with x-ray photoelectron spectroscopy , 1997 .

[117]  R. Mickelsen,et al.  Development of a 9.4% efficient thin-film CuInSe2/CdS solar cell , 1981 .

[118]  Hans Zogg,et al.  Microstructural study of the CdS/CuGaSe2 interfacial region in CuGaSe2 thin film solar cells , 1999 .

[119]  A. Abken,et al.  Sputtered Mo/Sb2Te3 and Ni/Sb2Te3 layers as back contacts for CdTe/CdS solar cells , 2002 .

[120]  Jonas Hedström,et al.  ZnO/CdS/Cu(In,Ga)Se/sub 2/ thin film solar cells with improved performance , 1993, Conference Record of the Twenty Third IEEE Photovoltaic Specialists Conference - 1993 (Cat. No.93CH3283-9).

[121]  R. Noufi,et al.  CuIn(Ga)Se2-based devices via a novel absorber formation process , 2000 .

[122]  W. Shafarman,et al.  Direct current-voltage measurements of the Mo/CuInSe/sub 2/ contact on operating solar cells , 1996, Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996.

[123]  H. Zogg,et al.  Development of efficient and stable back contacts on CdTe/CdS solar cells , 2001 .

[124]  A. Romeo,et al.  A highly efficient and stable CdTe/CdS thin film solar cell , 1999 .

[125]  S. Raud,et al.  Study of the CuInSe2/Mo thin film contact stability , 1991 .

[126]  Rommel Noufi,et al.  HIGH-EFFICIENCY CUINXGA1-XSE2 SOLAR CELLS MADE FROM (INX,GA1-X)2SE3 PRECURSOR FILMS , 1994 .

[127]  Ajeet Rohatgi,et al.  Growth and process optimization of CdTe and CdZnTe polycrystalline films for high efficiency solar cells , 1991 .

[128]  A. Klein.  Electronic properties of In2O3 surfaces , 2000 .

[129]  Al-Jassim,et al.  Cross-sectional atomic force microscopy imaging of polycrystalline thin films , 2000, Ultramicroscopy.

[130]  Bulent M. Basol,et al.  Low cost methods for the production of semiconductor films for CuInSe2/CdS solar cells☆ , 1987 .

[131]  Reiner Klenk,et al.  Efficient CuInS2 solar cells from a rapid thermal process (RTP) , 2001 .

[132]  L. Kazmerski,et al.  Studies of recrystallization of CdTe thin films after CdCl/sub 2/ treatment [solar cells] , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[133]  A. Yamada,et al.  Polycrystalline Cu(InGa)Se2 Thin-Film Solar Cells with ZnSe Buffer Layers , 1995 .

[134]  H. Zogg,et al.  Influence of CdS growth process on structural and photovoltaic properties of CdTe/CdS solar cells , 2001 .

[135]  J. Tuttle,et al.  A 15.2% AMO/1433 W/kg thin-film Cu(In,Ga)Se/sub 2/ solar cell for space applications , 2000, Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference - 2000 (Cat. No.00CH37036).

[136]  A. Rockett,et al.  Na incorporation in Mo and CuInSe2 from production processes , 1999 .

[137]  A. Rockett,et al.  Na in selenized Cu(In,Ga)Se2 on Na-containing and Na-free glasses: distribution, grain structure, and device performances , 2000 .

[138]  Properties of the Mo‐CuInSe2 interface , 1982 .

[139]  Robert W. Birkmire,et al.  POLYCRYSTALLINE THIN FILM SOLAR CELLS:Present Status and Future Potential , 1997 .

[140]  J. Granata,et al.  Effects of substrate and Na concentration on device properties, junction formation, and film microstructure in CuInSe2PV devices , 1998 .

[141]  H. Zogg,et al.  Light soaking effects in Cu(In,Ga)Se2 superstrate solar cells , 2003 .

[142]  D. Bonnet,et al.  Start-up and operation of an integrated 10 MW/sub p/ thin film PV module factory , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[143]  D. Cahen,et al.  Electrodeposition of CuInSe2 and CuInS2 films , 1986 .

[144]  N. Romeo,et al.  LARGE CRYSTALLINE GRAIN CdTe THIN FILMS FOR PHOTOVOLTAIC APPLICATION , 1992 .