Application of extreme learning machine in behavior of beam to column connections

Abstract The effectiveness and performance of beam to column connections have been highly affected by the type and properties of structures. An effective and stable design of beam to column connections is critical because in many cases, a single connection must be able to carry several types of loads at the same time. When designing these connections, it is important to consider erection, serviceability, strength, and cost-effectiveness as an efficient design that must be economic in practice. In this study, experimental results for the designed beam to column connection in concrete frames have been applied while evaluating the outcomes. Development and applying of Extreme Learning Machine (ELM) for moment prediction of beam to column connections are the objectives of this study. By understanding and integrating the relevant simulation outcomes and other statistical indicators, the reliability of the computational models has been analyzed.

[1]  Mahmood Md. Tahir,et al.  Numerical analysis of tilted angle shear connectors in steel-concrete composite systems , 2017 .

[2]  M. Shariati,et al.  Dynamic mix design optimization of high-performance concrete , 2018 .

[3]  M. Shariati,et al.  Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines , 2020 .

[4]  H. Nezamabadi-pour,et al.  Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams , 2013 .

[5]  M. Shariati,et al.  Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping , 2019 .

[6]  Mahdi Shariati,et al.  Behavior of V-shaped angle shear connectors: experimental and parametric study , 2016 .

[7]  Karzan Wakil,et al.  Computational Lagrangian Multiplier Method using optimization and sensitivity analysis of rectangular reinforced concrete beams , 2018 .

[8]  G. Cheok,et al.  Performance of Precast Concrete Beam-to-Column Connections Subject to Cyclic Loading , 1991 .

[9]  Meldi Suhatril,et al.  Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading , 2013 .

[10]  Meldi Suhatril,et al.  Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete , 2014 .

[11]  Aleksander Vesel,et al.  Modeling the packing coloring problem of graphs , 2015 .

[12]  Zehui Shao,et al.  Estimating the friction angle of black shale core specimens with hybrid-ANN approaches , 2019, Measurement.

[13]  Iman Mansouri,et al.  Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique , 2019, J. Intell. Manuf..

[14]  D. J. Armaghani,et al.  Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber , 2020 .

[15]  Mohd Zamin Jumaat,et al.  Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP) , 2011 .

[16]  M. Shariati,et al.  Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium , 2018 .

[17]  Chee Kheong Siew,et al.  Real-time learning capability of neural networks , 2006, IEEE Trans. Neural Networks.

[18]  Musab N. A. Salih,et al.  Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures , 2019 .

[19]  Majid Khorami,et al.  Strengthening of bolted shear joints in industrialized ferrocement construction , 2018 .

[20]  N. Sulong,et al.  Prediction of shear capacity of channel shear connectors using the ANFIS model , 2014 .

[21]  B. Pham,et al.  Computational and experimental analysis of beam to column joints reinforced with CFRP plates , 2019 .

[22]  Behnam Askarian,et al.  The chiller’s electricity consumption simulation by considering the demand response program in power system , 2019, Applied Thermal Engineering.

[23]  Mahdi Shariati,et al.  Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique , 2011 .

[24]  Xuan Song,et al.  Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete , 2019, Applied Sciences.

[25]  Mahdi Shariati,et al.  Steel Rack Connections: Identification of Most Influential Factors and a Comparison of Stiffness Design Methods , 2015, PloS one.

[26]  Maryam Safa,et al.  Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils , 2019 .

[27]  Nguyen Thoi Trung,et al.  Moment-rotation prediction of precast beam-to-column connections using extreme learning machine , 2019 .

[28]  Yousef Zandi,et al.  Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete , 2019 .

[29]  M. Shariati,et al.  Shear capacity equation for channel shear connectors in steel-concrete composite beams , 2018 .

[30]  Karzan Wakil,et al.  Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors , 2018 .

[31]  Payam Shafigh,et al.  Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests , 2011 .

[32]  Chee Kheong Siew,et al.  Extreme learning machine: Theory and applications , 2006, Neurocomputing.

[33]  Bo Wang,et al.  Kriging Empirical Mode Decomposition via support vector machine learning technique for autonomous operation diagnosing of CHP in microgrid , 2018, Applied Thermal Engineering.

[34]  Karzan Wakil,et al.  Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm) , 2020 .

[35]  Maryam Safa,et al.  Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load , 2020 .

[36]  Sergio M. Alcocer,et al.  Seismic tests of beam-to-column connections in a precast concrete frame , 2002 .

[37]  R. Ansari,et al.  Viscoelastic analysis of silica nanoparticle-polymer nanocomposites , 2019, Composites Part B: Engineering.

[38]  Meldi Suhatril,et al.  Investigation of channel shear connectors for composite concrete and steel T-beam , 2012 .

[39]  Mohd Zamin Jumaat,et al.  Behavior of steel pallet rack beam-to-column connections at elevated temperatures , 2016 .

[40]  M. Shariati,et al.  Behavior of steel-concrete composite beam using angle shear connectors at fire condition , 2019 .

[41]  Meldi Suhatril,et al.  A new finite element investigation on pre-bent steel strips as damper for vibration control , 2011 .

[42]  Nguyen Thoi Trung,et al.  A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques , 2020, Engineering with Computers.

[43]  M. H. Hashemi,et al.  Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake , 2018 .

[44]  Yousef Zandi,et al.  Portland cement structure and its major oxides and fineness , 2018 .

[45]  Meldi Suhatril,et al.  Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete , 2014 .

[46]  Mahdi Shariati,et al.  Seismic performance of structures with pre-bent strips as a damper , 2012 .

[47]  N. Sulong,et al.  Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete , 2011 .

[48]  D. N. Trikha,et al.  Industrialised building systems , 2004 .

[49]  S. Pei,et al.  Distribution of shear force in perforated shear connectors , 2018 .

[50]  J. Stanton,et al.  Performance of Hybrid Moment-Resisting Precast Beam-Column Concrete Connections Subjected to Cyclic Loading , 1995 .

[51]  Ana Lúcia Homce de Cresce El Debs,et al.  Moment–rotation relationship of RC beam-column connections: Experimental tests and analytical model , 2013 .

[52]  James H. Haido,et al.  Reduction of cement consumption by producing smart green concretes with natural zeolites , 2019 .

[53]  Musab N. A. Salih,et al.  Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings , 2019 .

[54]  Mahdi Shariati,et al.  Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete , 2012 .

[55]  M. Shariati,et al.  Investigation of pipe shear connectors using push out test , 2018 .

[56]  Yousef Zandi,et al.  Application of waste tire rubber aggregate in porous concrete , 2019 .

[57]  Ali Toghroli,et al.  A review on pavement porous concrete using recycled waste materials , 2018 .

[58]  S.N.R. Shah,et al.  Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections , 2018 .

[59]  Hossein Nezamabadi-pour,et al.  An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups , 2014 .

[60]  S.N.R. Shah,et al.  Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire , 2016 .

[61]  S.N.R. Shah,et al.  Performance of shear connectors at elevated temperatures ? A review , 2016 .

[62]  Meldi Suhatril,et al.  Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study , 2012 .

[63]  D. Bui,et al.  An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections , 2019 .

[64]  Nguyen Thoi Trung,et al.  Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures , 2019, Engineering with Computers.

[65]  Maryam Safa,et al.  Strain rate effects on soil-geosynthetic interaction in fine-grained soil , 2019 .

[66]  Karzan Wakil,et al.  Moment-rotation estimation of steel rack connection using extreme learning machine , 2019 .

[67]  Kim S. Elliott,et al.  Multi-Storey Precast Concrete Framed Structures , 1996 .

[68]  Mahdi Shariati,et al.  Behavior of through Beam Connections Composed of CFSST Columns and Steel Beams by Finite Element Studying , 2010 .

[69]  Mahdi Shariati,et al.  Behavior of Tilted Angle Shear Connectors , 2015, PloS one.

[70]  Mohd Zamin Jumaat,et al.  State-of-the-art review on the design and performance of steel pallet rack connections , 2016 .

[71]  D. Bui,et al.  Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete , 2019 .

[72]  Norazman Mohamad Nor,et al.  Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength , 2016 .

[73]  Kim S. Elliott,et al.  Precast Concrete Structures , 2002 .

[74]  Ali Toghroli,et al.  Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines , 2020 .

[75]  M. Shariati,et al.  Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams , 2018 .

[76]  Shahaboddin Shamshirband,et al.  Potential of soft computing approach for evaluating the factors affecting the capacity of steel–concrete composite beam , 2016, J. Intell. Manuf..

[77]  Meldi Suhatril,et al.  Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios , 2013 .

[78]  A. Rahimi,et al.  Heat transfer and nanofluid flow of free convection in a quarter cylinder channel considering nanoparticle shape effect , 2019, Powder Technology.

[79]  Chang-Sik Choi,et al.  Development and testing of precast concrete beam-to-column connections , 2013 .

[80]  M. Shariati,et al.  Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS , 2012 .

[81]  Mahdi Shariati,et al.  Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study , 2016 .

[82]  Mahdi Shariati,et al.  Shear Capacity of C-Shaped and L-Shaped Angle Shear Connectors , 2016, PloS one.

[83]  H. S. Lew,et al.  Model Precast Concrete Beam-to-Column Connections Subject to Cyclic Loading , 1993 .

[84]  Mahdi Shariati,et al.  Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS) , 2020 .

[85]  Meldi Suhatril,et al.  An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio , 2014 .

[86]  Mohd Zamin Jumaat,et al.  Behavior of Industrial Steel Rack Connections , 2016 .