Simplified design methods of reverse flow catalytic combustors for the treatment of lean hydrocarbon–air mixtures

Abstract Three simplified models for reverse flow reactor design proposed in the literature have been compared with a detailed and experimentally validated 1D heterogeneous dynamic model. The model proposed by Cittadini et al., has been found to be the most accurate at the considered operation conditions. Maximum reactor temperature, an important parameter for preventing damage to the catalyst or detecting reactor extinction, has also been determined for all the designs. The costs associated to different RFR design alternatives for the combustion of the compounds studied are also evaluated, in order to determine the optimal economical design.

[1]  A. S. Noskov,et al.  Progress in reverse-process application to catalytic incineration problems , 1993 .

[2]  Hugo S. Caram,et al.  The design of reverse flow reactors for catalytic combustion systems , 1995 .

[3]  Jamal Chaouki,et al.  CATALYTIC COMBUSTION OF NATURAL GAS IN A FIXED BED REACTOR WITH FLOW REVERSAL , 1993 .

[4]  Antonello Barresi,et al.  Control of catalytic combustors with periodical flow reversal , 2002 .

[5]  Davide Fissore,et al.  Design and testing of a control system for reverse-flow catalytic afterburners , 2005 .

[6]  J. P. Mmbaga,et al.  Three dimensional modelling of methane ignition in a reverse flow catalytic converter , 2007, Comput. Chem. Eng..

[7]  Thomas Turek,et al.  Catalytic combustion in a reactor with periodic flow reversal. Part 2. Steady-state reactor model , 1997 .

[8]  G. Eigenberger,et al.  General Approach for the Reduction of Detailed Models for Fast Cycling Processes , 2005 .

[10]  Davide Fissore,et al.  Design and testing of small‐scale unsteady‐state afterburners and reactors , 2005 .

[11]  Klaas R. Westerterp,et al.  Air purification in a reverse‐flow reactor: Model simulations vs. experiments , 1996 .

[12]  Ulrich Nieken,et al.  Fixed bed reactors with periodic flow reversal : experimental results for catalytic combustion , 1994 .

[13]  Andrzej Gawdzik,et al.  Dynamic properties of the adiabatic tubular reactor with switch flow , 1988 .

[14]  M. Sheintuch.  Analysis of design sensitivity of flow-reversal reactors: Simulations, approximations and oxidation experiments , 2005 .

[15]  E. Wicke,et al.  Zündzonen heterogener Reaktionen in gasdurchströmten Körnerschichten , 1959 .

[16]  R. E. Hayes,et al.  Modelling a reverse flow reactor for the catalytic combustion of fugitive methane emissions , 2004, Comput. Chem. Eng..

[17]  S. Ordóñez,et al.  Combustion of toluene-hexane binary mixtures in a reverse flow catalytic reactor , 2008 .

[18]  Pablo Marín,et al.  Combustion of methane lean mixtures in reverse flow reactors: Comparison between packed and structured catalyst beds , 2005 .

[19]  G. Bunimovich,et al.  Reverse-Flow Operation in Fixed Bed Catalytic Reactors , 1996 .

[20]  Ulrich Nieken,et al.  Limiting cases and approximate solutions for fixed-bed reactors with periodic flow reversal , 1995 .

[21]  Salvador Ordóñez,et al.  Effect of the catalyst properties on the performance of a reverse flow reactor for methane combustion in lean mixtures , 2007 .

[22]  Krzysztof Gosiewski,et al.  Effect of the intraparticle mass transport limitations on temperature profiles and catalytic performance of the reverse-flow reactor for the partial oxidation of methane to synthesis gas , 1999 .

[23]  G. Bunimovich,et al.  Control of Volatile Organic Compounds by the Catalytic Reverse Process , 1995 .

[24]  Hassan Hammouri,et al.  Control of a reverse flow reactor for VOC combustion , 2005 .

[25]  Antonello Barresi,et al.  Simplified procedure for design of catalytic combustors with periodic flow reversal , 2001 .

[26]  Robert E. Hayes,et al.  Heat Extraction from a Flow Reversal Reactor in Lean Methane Combustion , 2005 .

[27]  S. Ordóñez,et al.  Effect of wall properties on the behavior of bench‐scale reverse flow reactors , 2006 .

[28]  Thomas Turek,et al.  Catalytic combustion in a reactor with periodic flow reversal. Part 1. Experimental results , 1997 .

[29]  Dan Luss,et al.  Complex dynamic features of a cooled reverse‐flow reactor , 1998 .

[31]  Y. Matros,et al.  Forced unsteady‐state processes in heterogeneous catalytic reactors , 1996 .

[32]  Gerhart Eigenberger,et al.  Autothermal fixed-bed reactor concepts , 2000 .

[33]  François Bertrand,et al.  Optimization of a flow reversal reactor for the catalytic combustion of lean methane mixtures , 2006 .

[34]  Ulrich Nieken,et al.  Catalytic combustion with periodic flow reversal , 1988 .

[35]  Antonello Barresi,et al.  Transient behaviour and start-up of periodic flow reversal reactors for catalytic decontamination of waste gases , 2002 .

[36]  K. Westerterp,et al.  The catalytic oxidation of organic contaminants in a packed bed reactor , 1994 .

[37]  Moshe Sheintuch,et al.  Flow-rate effects in flow-reversal reactors: experiments, simulations and approximations , 2003 .

[38]  R. Pontier,et al.  Reverse flow reactor at short switching periods for VOC combustion , 2001 .

[39]  Klaas R. Westerterp,et al.  Removal of volatile organic compounds from polluted air in a reverse flow reactor: an experimental study , 1994 .