The new generation of superconductor equipment for the electric power grid

High-temperature superconductor (HTS) power equipment, such as power cables, synchronous condensers, fault current limiters (FCLs), and transformers, are poised to address key technical issues in the U.S. Power grid. This equipment is enabled by the successful development of robust long-length HTS wire, available commercially from a variety of manufacturers worldwide. Compared to conventional cables, HTS power cables offer higher capacity with minimal disturbance to neighboring underground infrastructure, and their low series impedance opens the opportunity for cost-effective power flow control with phase angle regulators. HTS cables are being actively prototyped worldwide. Based on technology developed for industrial and ship propulsion motors, an HTS synchronous condenser has been developed and successfully tested in the Tennessee Valley Authority (TVA) grid; this is the first HTS power equipment to be offered commercially. It addresses the growing need for dynamic reactive power compensation for grid stability and power quality. HTS FCLs and transformers are also in active development

[1]  David C. Larbalestier,et al.  Superconducting materials for large scale applications , 2004, Proceedings of the IEEE.

[2]  S. Kalsi,et al.  HTS fault current limiter concept , 2004, IEEE Power Engineering Society General Meeting, 2004..

[3]  Swarn S. Kalsi,et al.  Development status of rotating machines employing superconducting field windings , 2004, Proceedings of the IEEE.

[4]  J.D. de Leon,et al.  Superconductor technologies for a controllable and reliable high capacity grid , 2004, IEEE PES Power Systems Conference and Exposition, 2004..

[5]  Mathias Noe,et al.  Electric power applications of superconductivity , 2004, Proceedings of the IEEE.

[6]  J. E. Jipping,et al.  The impact of HTS cables on power flow distribution and short-circuit currents within a meshed network , 2001, 2001 IEEE/PES Transmission and Distribution Conference and Exposition. Developing New Perspectives (Cat. No.01CH37294).

[7]  T. Masuda,et al.  High-temperature Superconducting Cable Technology and Development Trends , 2005 .

[8]  B. Kehrli,et al.  Superconducting technologies for a controllable and reliable high capacity grid , 2004, IEEE Power Engineering Society General Meeting, 2004..

[9]  T.E. Welsh,et al.  Development and demonstration of a long length HTS cable to operate in the long island power authority transmission grid , 2005, IEEE Transactions on Applied Superconductivity.

[10]  A. Malozemoff,et al.  High-temperature cuprate superconductors get to work , 2005 .

[11]  S. Woodruff,et al.  Testing a 5 MW high-temperature superconducting propulsion motor , 2005, IEEE Electric Ship Technologies Symposium, 2005..