Variation in predicting pantograph–catenary interaction contact forces, numerical simulations and field measurements

ABSTRACT The contact force between the pantograph and the contact wire ensures energy transfer between the two. Too small of a force leads to arching and unstable energy transfer, while too large of a force leads to unnecessary wear on both parts. Thus, obtaining the correct contact force is important for both field measurements and estimates using numerical analysis. The field contact force time series is derived from measurements performed by a self-propelled diagnostic vehicle containing overhead line recording equipment. The measurements are not sampled at the actual contact surface of the interaction but by force transducers beneath the collector strips. Methods exist for obtaining more realistic measurements by adding inertia and aerodynamic effects to the measurements. The variation in predicting the pantograph–catenary interaction contact force is studied in this paper by evaluating the effect of the force sampling location and the effects of signal processing such as filtering. A numerical model validated by field measurements is used to study these effects. First, this paper shows that the numerical model can reproduce a train passage with high accuracy. Second, this study introduces three different options for contact force predictions from numerical simulations. Third, this paper demonstrates that the standard deviation and the maximum and minimum values of the contact force are sensitive to a low-pass filter. For a specific case, an 80 Hz cut-off frequency is compared to a 20 Hz cut-off frequency, as required by EN 50317:2012; the results show an 11% increase in standard deviation, a 36% increase in the maximum value and a 19% decrease in the minimum value.

[1]  Johannes Gerstmayr,et al.  Analysis of Thin Beams and Cables Using the Absolute Nodal Co-ordinate Formulation , 2006 .

[2]  Michael J. Brennan,et al.  DYNAMIC STIFFNESS OF A RAILWAY OVERHEAD WIRE SYSTEM AND ITS EFFECT ON PANTOGRAPH–CATENARY SYSTEM DYNAMICS , 1999 .

[3]  Petter Nåvik,et al.  The use of dynamic response to evaluate and improve the optimization of existing soft railway catenary systems for higher speeds , 2016 .

[4]  Jorge Ambrósio,et al.  A Memory Based Communication in the Co-simulation of Multibody and Finite Element Codes for Pantograph-Catenary Interaction Simulation , 2009 .

[5]  A. Carnicero,et al.  Active control strategy on a catenary–pantograph validated model , 2013 .

[6]  Stefano Bruni,et al.  Numerical Simulation of Pantograph-Overhead Equipment Interaction , 2002 .

[7]  Enrique Arias,et al.  A high performance tool for the simulation of the dynamic pantograph-catenary interaction , 2008, Math. Comput. Simul..

[8]  Giuseppe Bucca,et al.  ELECTROMECHANICAL INTERACTION BETWEEN CARBON BASED PANTOGRAPH STRIP AND COPPER CONTACT WIRE: A HEURISTIC WEAR MODEL , 2015 .

[9]  Petter Nåvik,et al.  Identification of system damping in railway catenary wire systems from full-scale measurements , 2016 .

[10]  Weihua Zhang,et al.  A hybrid method to simulate the interaction of pantograph and catenary on overlap span , 2006 .

[11]  Petter Nåvik,et al.  A wireless railway catenary structural monitoring system: Full-scale case study , 2016 .

[12]  W. Kortüm,et al.  Pantograph/Catenary Dynamics and Control , 1997 .

[13]  Ning Zhou,et al.  Dynamic performance of a pantograph-catenary system with the consideration of the appearance characteristics of contact surfaces , 2011 .

[14]  Weihua Zhang,et al.  Study on dynamics of coupled systems in high-speed trains , 2013 .

[15]  Jorge Ambrósio,et al.  Optimization of high-speed railway pantographs for improving pantograph-catenary contact , 2013 .

[16]  Mitsuru Ikeda,et al.  The results of the pantograph–catenary interaction benchmark , 2015 .

[17]  Carmine Maria Pappalardo,et al.  Contact force control in multibody pantograph/catenary systems , 2016 .

[18]  Jin-Hee Lee,et al.  Analysis of dynamic interaction between catenary and pantograph with experimental verification and performance evaluation in new high-speed line , 2015 .

[19]  Petter Nåvik,et al.  Dynamic assessment of existing soft catenary systems using modal analysis to explore higher train velocities: a case study of a Norwegian contact line system , 2015 .

[20]  Andrea Collina,et al.  Processing of collector acceleration data for condition-based monitoring of overhead lines , 2016 .

[21]  Rainer Puschmann,et al.  Contact Lines for Electric Railways: Planning, Design, Implementation, Maintenance , 2001 .

[22]  Jorge Ambrósio,et al.  Recent Developments in Pantograph-Catenary Interaction Modelling and Analysis , 2012 .

[23]  Yang Song,et al.  Nonlinear analysis of wind-induced vibration of high-speed railway catenary and its influence on pantograph–catenary interaction , 2016 .

[24]  Alan Facchinetti,et al.  Computational fluid dynamics as a means of assessing the influence of aerodynamic forces on the mean contact force acting on a pantograph , 2016 .