Evolutionary Topology Optimization for Designing Cellular Fluid Actuators

Bio-inspired shape adapting systems, based on plants that can reshape themselves by altering the pressure in their cells, can attain very desirable features, such as light weight, large actuation and simple input. It is proposed to design efficient fluid actuators as cellular compliant mechanisms, in which each cell is internally loaded by pressured fluid cavities, through topology optimization techniques. In this work, a model for such cells was proposed, the finite element analysis, sensitivity analysis and optimization method were described and implemented. The chosen optimization method was the soft-kill Bidirectional Evolutionary Structural Optimization (BESO) method with material penalization. The loads dependency on the topology together with two considered nonlinear effects (geometrical nonlinearity and load nonlinearity) act as hindering factors to the optimization process as a whole. Cells with maximized expansion were obtained for two cases: cells that actuate only horizontally; and cells that actuate both horizontally and vertically.

[1]  Renato Pavanello,et al.  Bi-directional evolutionary structural optimization for design-dependent fluid pressure loading problems , 2015 .

[2]  B. R. Seth.  GENERALIZED STRAIN MEASURE WITH APPLICATIONS TO PHYSICAL PROBLEMS , 1961 .

[3]  Yi Min Xie,et al.  Evolutionary Topology Optimization of Continuum Structures: Methods and Applications , 2010 .

[4]  Jamie Paik,et al.  Stretchable Materials for Robust Soft Actuators towards Assistive Wearable Devices , 2016, Scientific Reports.

[5]  T. E. Bruns,et al.  Topology optimization of non-linear elastic structures and compliant mechanisms , 2001 .

[6]  H. Liu,et al.  A multiscale co-rotational method for geometrically nonlinear shape morphing of 2D fluid actuated cellular structures , 2014 .

[7]  Alena Kruisová,et al.  Formulation, validation and numerical procedures for Hencky's elasticity model , 2006 .

[8]  H. Xiao,et al.  Hencky Strain and Hencky Model: Extending History and Ongoing Tradition , 2005 .

[9]  Hongzhe Zhang,et al.  Shape and topology optimization for closed liquid cell materials using extended multiscale finite element method , 2014 .

[10]  Renato Pavanello,et al.  Evolutionary Topology Optimization of Geometrically Nonlinear Continuum Structures , 2016 .

[11]  Jun Lv,et al.  Topology optimization of adaptive fluid-actuated cellular structures with arbitrary polygonal motor cells , 2016 .

[12]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[13]  Yi Min Xie,et al.  Topology optimization of frequency responses of fluid–structure interaction systems , 2015 .

[14]  M Pagitz,et al.  Pressure-actuated cellular structures , 2012, Bioinspiration & biomimetics.

[15]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[16]  Dan M. Frangopol,et al.  Reliability-based design of MEMS mechanisms by topology optimization , 2003 .

[17]  Lisa Mauck Weiland,et al.  High Energy Density Nastic Materials: Parameters for Tailoring Active Response , 2009 .