In vivo comparison of femorotibial contact positions for press-fit posterior stabilized and posterior cruciate-retaining total knee arthroplasties.

The objective of this study was to determine the in vivo medial and lateral femorotibial condyle contact positions for 20 subjects having either a posterior cruciate-retaining (PCR) or posterior-stabilized (PS) total knee arthroplasty (TKA) while sitting and kneeling. The two-dimensional radiographic images were converted into three-dimensional images using an iterative computer model-fitting technique. Anteroposterior contact positions, axial rotation, and condylar lift-off were assessed for each subject. In a seated position, the femorotibial contact points were, on average, posterior for both TKA groups (PCR: medial = -2.4 mm, lateral = -3.4 mm; PS: medial = -5.1 mm, lateral = -8.9 mm; medial, P=.21; lateral, P=.08). In a kneeling position, the contact position shifted anteriorly for the PCR TKA group (medial = 0.9 mm, lateral = -0.8 mm), whereas the contact positions in the PS TKA group remained posterior (medial = -5.6 mm, lateral = -8.3 mm; medial, P=.002; lateral, P=.0004). It is hypothesized that while in a kneeling position, the posterior cruciate ligament has less resistance to the anterior thrust of the femur relative to the tibia than in a PS TKA, in which this force is absorbed in the cam-and-post mechanism.

[1]  R. Bourne,et al.  Posteromedial tibial polyethylene failure in total knee replacements. , 1994, Clinical orthopaedics and related research.

[2]  M. Ries,et al.  Safety and Efficacy of Ethylene Oxide Sterilized Polyethylene in Total Knee Arthroplasty , 1996, Clinical orthopaedics and related research.

[3]  K. Markolf,et al.  In vitro measurements of knee stability after bicondylar replacement. , 1979, The Journal of bone and joint surgery. American volume.

[4]  Stefan M. Gabriel,et al.  Three-dimensional determination of femoral-tibial contact positions under in vivo conditions using fluoroscopy. , 1998, Clinical biomechanics.

[5]  S. Stern,et al.  Posterior stabilized prosthesis. Results after follow-up of nine to twelve years. , 1992, The Journal of bone and joint surgery. American volume.

[6]  J Kärrholm,et al.  Abnormal kinematics of the artificial knee. Roentgen stereophotogrammetric analysis of 10 Miller-Galante and five New Jersey LCS knees. , 1991, Acta orthopaedica Scandinavica.

[7]  R. Scott,et al.  Kneeling ability after total knee arthroplasty. Perception and reality. , 1999, Clinical orthopaedics and related research.

[8]  E S Grood,et al.  A joint coordinate system for the clinical description of three-dimensional motions: application to the knee. , 1983, Journal of biomechanical engineering.

[9]  M. Freeman,et al.  ICLH arthroplasty of the knee: 1968--1977. , 1978, The Journal of bone and joint surgery. British volume.

[10]  D A Dennis,et al.  In Vivo Knee Kinematics Derived Using an Inverse Perspective Technique , 1996, Clinical orthopaedics and related research.

[11]  P S Walker,et al.  Geometry and motion of the knee for implant and orthotic design. , 1985, Journal of biomechanics.

[12]  D A Dennis,et al.  An in vivo determination of patellofemoral contact positions. , 2000, Clinical biomechanics.

[13]  D. Dennis,et al.  Posterior cruciate condylar total knee arthroplasty. Average 11-year follow-up evaluation. , 1992, Clinical orthopaedics and related research.

[14]  P. Walker,et al.  Stabilizing mechanisms of the loaded and unloaded knee joint. , 1976, The Journal of bone and joint surgery. American volume.

[15]  P. Freeman Walldius arthroplasty. A review of 80 cases. , 1973, Clinical orthopaedics and related research.

[16]  R. Wixson,et al.  Progressive subluxation and polyethylene wear in total knee replacements with flat articular surfaces. , 1994, Clinical orthopaedics and related research.

[17]  J Kärrholm,et al.  Knee motion in total knee arthroplasty. A roentgen stereophotogrammetric analysis of the kinematics of the Tricon-M knee prosthesis. , 1990, Clinical orthopaedics and related research.

[18]  D A Dennis,et al.  In Vivo Anteroposterior Femorotibial Translation of Total Knee Arthroplasty: A Multicenter Analysis , 1998, Clinical orthopaedics and related research.

[19]  R. Warren,et al.  An in vitro biomechanical evaluation of anterior-posterior motion of the knee. Tibial displacement, rotation, and torque. , 1982, The Journal of bone and joint surgery. American volume.

[20]  P. Walker,et al.  Wear of ultra-high-molecular-weight polyethylene components of 90 retrieved knee prostheses. , 1988, The Journal of arthroplasty.

[21]  A. Deburge,et al.  Guepar hinge prosthesis: complications and results with two years' follow-up. , 1976, Clinical orthopaedics and related research.

[22]  P. Walker,et al.  Prediction of total knee motion using a three-dimensional computer-graphics model. , 1990, Journal of biomechanics.

[23]  J. Insall,et al.  The total condylar prosthesis. 10- to 12-year results of a cemented knee replacement. , 1989, The Journal of bone and joint surgery. British volume.

[24]  J B Stiehl,et al.  Femoral condylar lift-off in vivo in total knee arthroplasty. , 2001, The Journal of bone and joint surgery. British volume.

[25]  K. Markolf,et al.  Stiffness and laxity of the knee--the contributions of the supporting structures. A quantitative in vitro study. , 1976, The Journal of bone and joint surgery. American volume.

[26]  T. Wright,et al.  Wear of polyethylene in total joint replacements. Observations from retrieved PCA knee implants. , 1992, Clinical orthopaedics and related research.

[27]  T P Andriacchi,et al.  Interaction between intrinsic knee mechanics and the knee extensor mechanism , 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[28]  T. Andriacchi Functional analysis of pre and post-knee surgery: total knee arthroplasty and ACL reconstruction. , 1993, Journal of biomechanical engineering.

[29]  D. Bartel,et al.  The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. , 1986, The Journal of bone and joint surgery. American volume.

[30]  J. Stiehl,et al.  Fluoroscopic analysis of kinematics after posterior-cruciate-retaining knee arthroplasty. , 1995, The Journal of bone and joint surgery. British volume.

[31]  M. B. Coventry,et al.  Geometric total knee arthroplasty. A two-year follow-up study. , 1976, The Journal of bone and joint surgery. American volume.

[32]  P R Cavanagh,et al.  Three-dimensional kinematics of the human knee during walking. , 1992, Journal of biomechanics.

[33]  C. Ranawat,et al.  Survivorship analysis and results of total condylar knee arthroplasty. Eight- to 11-year follow-up period. , 1988, Clinical orthopaedics and related research.

[34]  J L Lewis,et al.  The effect of knee-prosthesis geometry on cruciate ligament mechanics during flexion. , 1982, The Journal of bone and joint surgery. American volume.

[35]  R. E. Jensen,et al.  Analysis of the Failure of 122 Polyethylene Inserts From Uncemented Tibial Knee Components , 1991, Clinical orthopaedics and related research.

[36]  K. Saum,et al.  Impact of gamma sterilization on clinical performance of polyethylene in the knee. , 1996, The Journal of arthroplasty.

[37]  D G Lewallen,et al.  Polycentric total knee arthroplasty. A ten-year follow-up study. , 1976, The Journal of bone and joint surgery. American volume.

[38]  J. Stiehl,et al.  In vivo determination of condylar lift-off and screw-home in a mobile-bearing total knee arthroplasty. , 1999, The Journal of arthroplasty.