Experiments on two-phase flow distribution inside parallel channels of compact heat exchangers

Abstract Uneven distribution in heat exchangers is a cause of reduction in both thermal and fluid-dynamic performances. Many papers have dealt with single-phase flow and both flow distribution data and analytical or numerical models are available for header design. With regard to two-phase flow, phase separation in manifolds with several outlets is so complicated that, to date, there is no general way to predict the distribution of two-phase mixtures at header-channel junctions. The design of headers for new generation compact heat exchangers and multi-microchannel evaporators is still based on an empirical approach, as a number of variables act together: geometrical parameters and orientation of the manifolds and of the channels, operating conditions, fluid physical properties. In the present paper measurements of the two-phase air–water distributions occurring in a cylindrical horizontal header supplying 16 vertical channels are reported for upward flow. The effects of the operating conditions, of the header-channel distribution area ratios and of the inlet port orifice plates were investigated. The flow rates of each phase flowing in the different channels were measured. Time varying, void fraction data were also analysed to characterise the two-phase flow patterns. Video records were taken in order to infer different flow patterns (from intermittent to annular) inside the header-channel system.

[1]  A. C. Mueller.  Effects of Some Types of Maldistribution on the Performance of Heat Exchangers , 1987 .

[2]  Masahiro Kawaji,et al.  Gas-Liquid and Flow Rate Distributions in Single End Tank Evaporator Plates , 1996 .

[3]  Jun Kyoung Lee,et al.  Distribution of two-phase annular flow at header–channel junctions , 2002 .

[4]  Yehuda Taitel,et al.  Two-phase flow in inclined parallel pipes , 1999 .

[5]  H. Martin,et al.  Flow distribution and pressure drop in plate heat exchangers—II Z-type arrangement , 1984 .

[6]  Jostein Pettersen,et al.  Two-phase flow distribution in compact heat exchanger manifolds , 2004 .

[7]  P. Hrnjak,et al.  Developing Adiabatic Two Phase Flow in Headers—Distribution Issue in Parallel Flow Microchannel Heat Exchangers , 2004 .

[8]  Y. Taitel,et al.  Flow distribution of gas and liquid in parallel pipes , 2003 .

[9]  James E. Braun,et al.  Application of CFD Models to Two-Phase Flow in Refrigerant Distributors , 2005 .

[10]  Owen C. Jones,et al.  The interrelation between void fraction fluctuations and flow patterns in two-phase flow , 1975 .

[11]  Predrag Stojan Hrnjak,et al.  Refrigerant distribution in the inlet header of plate evaporators , 2002 .

[12]  Richard T. Lahey,et al.  Phase separation in dividing two-phase flows , 1988 .

[13]  Bengt Sundén,et al.  An experimental and theoretical investigation of the effect of flow maldistribution on the thermal performance of plate heat exchangers , 2005 .

[14]  A. Dukler,et al.  A model for predicting flow regime transitions in horizontal and near horizontal gas‐liquid flow , 1976 .

[15]  A. Acrivos,et al.  Flow distributions in manifolds , 1959 .

[16]  Katsuya Nagata,et al.  General characteristics of two-phase flow distribution in a multipass tube , 1995 .

[17]  B. Kamil,et al.  Flow Distribution in Manifolds , 2008 .

[18]  Marco Fossa,et al.  Pressure drop and void fraction profiles during horizontal flow through thin and thick orifices , 2002 .

[19]  Young I. Cho,et al.  The effect of header shapes on the flow distribution in a manifold for electronic packaging applications , 1995 .

[20]  Nae-Hyun Kim,et al.  Two-phase flow distribution of air–water annular flow in a parallel flow heat exchanger , 2006 .

[21]  P. Hrnjak,et al.  Adiabatic Developing Two-Phase Refrigerant Flow in Manifolds of Heat Exchangers , 2004 .

[22]  Predrag Stojan Hrnjak,et al.  Single-Phase Pressure Drop Measurements in a Microchannel Heat Exchanger , 2002 .

[23]  James E. Braun,et al.  Evaluating The Performance Of Refrigerant Flow Distributors , 2002 .

[24]  Predrag Stojan Hrnjak,et al.  Effects of Distribution in Headers of Microchannel Evaporators on Transcritical CO2 Heat Pump Performance , 2000, Advanced Energy Systems.

[25]  M. Fossa.  Gas-Liquid Distribution in the Developing Region of Horizontal Intermittent Flows , 2001 .

[26]  J. Chiou,et al.  Review of various Types of Flow Maldistribution in Heat Exchangers , 1988 .

[27]  R. Bajura,et al.  Flow Distribution Manifolds , 1976 .

[28]  Ralph L. Webb,et al.  Two-Phase Flow Distribution to Tubes of Parallel Flow Air-Cooled Heat Exchangers , 2005 .

[29]  Masahiro Osakabe,et al.  Water flow distribution in horizontal header contaminated with bubbles , 1999 .

[30]  Honggi Cho,et al.  MASS FLOW RATE DISTRIBUTION AND PHASE SEPARATION OF R-22 IN MULTI-MICROCHANNEL TUBES UNDER ADIABATIC CONDITION , 2004 .