Machining fixture layout design using ant colony algorithm based continuous optimization method

In any machining fixture, the workpiece elastic deformation caused during machining influences the dimensional and form errors of the workpiece. Placing each locator and clamp in an optimal place can minimize the elastic deformation of the workpiece, which in turn minimizes the dimensional and form errors of the workpiece. Design of fixture configuration (layout) is a procedure to establish the workpiece–fixture contact through optimal positioning of clamping and locating elements. In this paper, an ant colony algorithm (ACA) based discrete and continuous optimization methods are applied for optimizing the machining fixture layout so that the workpiece elastic deformation is minimized. The finite element method (FEM) is used for determining the dynamic response of the workpiece caused due to machining and clamping forces. The dynamic response of the workpiece is simulated for all ACA runs. This paper proves that the ACA-based continuous fixture layout optimization method exhibits the better results than that of ACA-based discrete fixture layout optimization method.

[1]  Necmettin Kaya,et al.  Machining fixture locating and clamping position optimization using genetic algorithms , 2006, Comput. Ind..

[2]  W. R. DeVries,et al.  Finite element analysis and optimization in fixture design , 1999 .

[3]  Shreyes N. Melkote,et al.  Determination of minimum clamping forces for dynamically stable fixturing , 2006 .

[4]  K. P. Padmanaban,et al.  Machining fixture layout optimization using FEM and evolutionary techniques , 2007 .

[5]  V. K. Jayaraman,et al.  Ant colony framework for optimal design and scheduling of batch plants , 2000 .

[6]  Shreyes N. Melkote,et al.  Fixture Clamping Force Optimisation and its Impact on Workpiece Location Accuracy , 2001 .

[7]  Warren R. DeVries,et al.  Optimization Methods Applied to Selecting Support Positions in Fixture Design , 1991 .

[8]  Panos Y. Papalambros,et al.  Multiobjective Optimization for Integrated Tolerance Allocation and Fixture Layout Design in Multistation Assembly , 2008 .

[9]  Panos Y. Papalambros,et al.  Multiobjective optimization for integrated tolerance allocation and fixture layout design in multistation assembly , 2006, DAC 2006.

[10]  Xinmin Lai.  Flexible assembly fixturing layout modeling and optimization based on genetic algorithm , 2004 .

[11]  Shreyes N. Melkote,et al.  Optimal Fixture Design Accounting for the Effect of Workpiece Dynamics , 2001 .

[12]  Horacio T. Sánchez,et al.  Fixturing analysis methods for calculating the contact load distribution and the valid clamping regions in machining processes , 2006 .

[13]  K. P. Padmanaban,et al.  Dynamic analysis on optimal placement of fixturing elements using evolutionary techniques , 2008 .

[14]  Shabbir Choudhuri,et al.  An investigation into the use of spatial coordinates for the genetic algorithm based solution of the fixture layout optimization problem , 2002 .

[15]  Jonathan W. Lee,et al.  Finite-Element Analysis of Flexible Fixturing System , 1987 .

[16]  Edward C. De Meter,et al.  Fast support layout optimization , 1998 .

[17]  J. Marcelin,et al.  Genetic Search Applied to Selecting Support Positions in Machining of Mechanical Parts , 2001 .

[18]  Shreyes N. Melkote,et al.  Iterative Fixture Layout and Clamping Force Optimization Using the Genetic Algorithm , 2000, Manufacturing Engineering.

[19]  Shreyes N. Melkote,et al.  Machining fixture layout optimization using the genetic algorithm , 2000 .

[20]  P. Asokan,et al.  Machine cell formation for cellular manufacturing systems using an ant colony system approach , 2005 .

[21]  Luca Maria Gambardella,et al.  Ant colony system: a cooperative learning approach to the traveling salesman problem , 1997, IEEE Trans. Evol. Comput..

[22]  Mohsen Hamedi,et al.  Intelligent Fixture Design through a Hybrid System of Artificial Neural Network and Genetic Algorithm , 2005, Artificial Intelligence Review.

[23]  Lucy Siu-Bik King,et al.  Theoretical approach for generating optimal fixturing locations for prismatic workparts in automated assembly , 1993 .

[24]  Kamal Youcef-Toumi,et al.  Kinematic methods for automated fixture reconfiguration planning , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[25]  P. Asokan,et al.  Sensitivity-based conceptual design and tolerance allocation using the continuous ants colony algorithm (CACO) , 2005 .

[26]  Andrew Y. C. Nee,et al.  Modeling, analysis, and verification of optimal fixturing design , 2004, IEEE Transactions on Automation Science and Engineering.

[27]  Y. Kang,et al.  Computer-Aided Fixture Design Verification. Part 2. Tolerance Analysis , 2003 .

[28]  Patrick R. McMullen,et al.  An ant colony optimization approach to addressing a JIT sequencing problem with multiple objectives , 2001, Artif. Intell. Eng..

[29]  Weihong Zhang,et al.  A mathematical approach to analysis and optimal design of a fixture locating scheme , 2006 .

[30]  Wickham Skinner,et al.  MANUFACTURING AND TECHNOLOGY , 1987 .