Additively-manufactured multiphase coatings with laser protection ability for the repairing of MoSi2-SiC/SiC coated C/C composites

[1]  Zeqi Hu,et al.  Region-based path planning method with all horizontal welding position for robotic curved layer wire and arc additive manufacturing , 2022, Robotics Comput. Integr. Manuf..

[2]  Ling-jun Guo,et al.  Influence of Graphitization Temperature on Microstructure and Mechanical Property of C/C-SiC Composites with Highly Textured Pyrolytic Carbon , 2021, Journal of the European Ceramic Society.

[3]  Ling-jun Guo,et al.  Crack Evolution and Oxidation Failure Mechanism of a SiC-Ceramic Coating Reactively Sintered on Carbon/Carbon Composites , 2021, Materials.

[4]  Hui‐Ming Cheng,et al.  Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties , 2021, Journal of the European Ceramic Society.

[5]  Choon-Man Lee,et al.  Repair of damaged parts using wire arc additive manufacturing in machine tools , 2021, Journal of Materials Research and Technology.

[6]  Qinsheng Bi,et al.  Residual mechanical properties of needle-punched carbon/carbon composites after oxidation , 2021, Composites Communications.

[7]  Z. Lei,et al.  Effects of melt convection on stray grain formation in single crystal superalloys during directed energy deposition , 2021, Additive Manufacturing.

[8]  D. Du,et al.  High-temperature oxidation behavior of a directionally solidified superalloy repaired by directed energy deposition , 2021, Corrosion Science.

[9]  Yulei Zhang,et al.  SiC/SiC-ZrSi2 coating with micro-pore to protect C/C composites against oxidation for long-life service at high temperatures , 2021 .

[10]  Kun Yang,et al.  Effect of pulse frequency on the morphology, microstructure, and corrosion resistance of high‑nitrogen steel prepared by laser directed energy deposition , 2021 .

[11]  P. Feng,et al.  Preparation of ZrB2-MoSi2 high oxygen resistant coating using nonequilibrium state powders by self-propagating high-temperature synthesis , 2021, Journal of Advanced Ceramics.

[12]  Jiaping Zhang,et al.  Effect of loading spectrum with different single pulsing time on the cyclic ablation of C/C-SiC-ZrB2-ZrC composites in plasma , 2021, Corrosion Science.

[13]  Q. Fu,et al.  Self-healing improvement strategy of thermally sprayed MoSi2 coating at 1773 K: From calculation to experiment , 2021 .

[14]  J. Schoenung,et al.  Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications , 2021, Materials Today.

[15]  Xiaohong Sun,et al.  Dense ceramics with complex shape fabricated by 3D printing: A review , 2021, Journal of Advanced Ceramics.

[16]  Hejun Li,et al.  Impact of introducing SiC and Si on microstructure and oxidation resistance of MoSi2/SiC coated C/C composites prepared by SAPS , 2020 .

[17]  Jing Zhang,et al.  Removal and repair techniques for thermal barrier coatings: a review , 2020 .

[18]  Wei Li,et al.  Influence of MoSi2 on oxidation protective ability of TaB2-SiC coating in oxygen-containing environments within a broad temperature range , 2020, Journal of Advanced Ceramics.

[19]  T. Nann,et al.  Highly efficient electrocatalytic hydrogen evolution promoted by O–Mo–C interfaces of ultrafine β-Mo2C nanostructures† , 2020, Chemical science.

[20]  Li Yang,et al.  3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.

[21]  J. Kruth,et al.  Direct laser sintering of reaction bonded silicon carbide with low residual silicon content , 2018, Journal of the European Ceramic Society.

[22]  X. Mei,et al.  Surface ablation and threshold determination of AlCu4SiMg aluminum alloy in picosecond pulsed laser micromachining , 2017 .

[23]  Bo Chen,et al.  Mechanical properties and formation mechanism of Ti/SiC system gradient materials fabricated by in-situ reaction laser cladding , 2017 .

[24]  T. Mühler,et al.  Slurry-based powder beds for the selective laser sintering of silicate ceramics , 2015 .

[25]  P. Marcus,et al.  Li-Ion Intercalation in Thermal Oxide Thin Films of MoO3 as Studied by XPS, RBS, and NRA , 2008 .